Re: rc2 stereo problem with via8233

[Takashi Iwai <tiwai@suse.de>]

At Tue, 25 Jun 2002 14:12:15 -0400,
John Covici wrote:
> 
> Hi.  With kernel 2.4.18 if I use the rc2 drivers, the PCM does not
> play the right channel, when I went back to rc1 it worked fine
> without any changes to my asound.state file.  The cd plays right
> channel in rc2 and rc1.

i guess you're using via8233 or 8233C, not 8233A, right?
please check lspci.  there are different chip models of via8233,
and each of them is different a bit.

actually, the code of via8233 driver was changed since rc1, to support
via8233a chip.  now it uses the multi-channel playback mode, which is
available on all chips.

does the problem happen on a stereo sample, or on a mono sample?
could you check the difference of formats and channels?


thanks,

Takashi


-------------------------------------------------------
This sf.net email is sponsored by: Jabber Inc.
Don't miss the IM event of the season | Special offer for OSDN members! 
JabberConf 2002, Aug. 20-22, Keystone, CO http://www.jabberconf.com/osdn