alsa-devel.alsa-project.org archive mirror
 help / color / mirror / Atom feed
From: Takashi Iwai <tiwai@suse.de>
To: David Henningsson <david.henningsson@canonical.com>
Cc: alsa-devel@alsa-project.org, 939161@bugs.launchpad.net
Subject: Re: [PATCH] ALSA: hda - Remove ignore_misc_bit
Date: Fri, 07 Sep 2012 12:01:03 +0200	[thread overview]
Message-ID: <s5hligmw3s0.wl%tiwai@suse.de> (raw)
In-Reply-To: <1346995544-6754-1-git-send-email-david.henningsson@canonical.com>

At Fri,  7 Sep 2012 07:25:44 +0200,
David Henningsson wrote:
> 
> The purpose of this flag is unclear. If the problem is that some machines
> have broken misc/NO_PRESENCE bits, they should be fixed by pin fixups.
> 
> In addition, this causes jack detection functionality to be flawed on
> the M31EI, where there are two jacks without jack detection (which is
> properly marked as NO_PRESENCE), but due to ignore_misc_bit, these
> jacks are instead being reported as being present but always unplugged.
> 
> BugLink: https://bugs.launchpad.net/bugs/939161
> Signed-off-by: David Henningsson <david.henningsson@canonical.com>

So this will fix this one case but will break some others certainly.
It's a difficult to judge, but more removal is better, so I'll take
this.

But I still wonder why PulseAudio cares the headphone jack state even
though this has only one output at all?


Takashi

> ---
>  sound/pci/hda/hda_auto_parser.c |    4 ----
>  sound/pci/hda/hda_codec.h       |    1 -
>  sound/pci/hda/hda_jack.c        |    5 ++---
>  3 files changed, 2 insertions(+), 8 deletions(-)
> 
> diff --git a/sound/pci/hda/hda_auto_parser.c b/sound/pci/hda/hda_auto_parser.c
> index 4f7d2df..9acd5a9 100644
> --- a/sound/pci/hda/hda_auto_parser.c
> +++ b/sound/pci/hda/hda_auto_parser.c
> @@ -141,7 +141,6 @@ int snd_hda_parse_pin_defcfg(struct hda_codec *codec,
>  	memset(sequences_hp, 0, sizeof(sequences_hp));
>  	assoc_line_out = 0;
>  
> -	codec->ignore_misc_bit = true;
>  	end_nid = codec->start_nid + codec->num_nodes;
>  	for (nid = codec->start_nid; nid < end_nid; nid++) {
>  		unsigned int wid_caps = get_wcaps(codec, nid);
> @@ -157,9 +156,6 @@ int snd_hda_parse_pin_defcfg(struct hda_codec *codec,
>  			continue;
>  
>  		def_conf = snd_hda_codec_get_pincfg(codec, nid);
> -		if (!(get_defcfg_misc(snd_hda_codec_get_pincfg(codec, nid)) &
> -		      AC_DEFCFG_MISC_NO_PRESENCE))
> -			codec->ignore_misc_bit = false;
>  		conn = get_defcfg_connect(def_conf);
>  		if (conn == AC_JACK_PORT_NONE)
>  			continue;
> diff --git a/sound/pci/hda/hda_codec.h b/sound/pci/hda/hda_codec.h
> index 8fd9f63..ee4ae8e 100644
> --- a/sound/pci/hda/hda_codec.h
> +++ b/sound/pci/hda/hda_codec.h
> @@ -861,7 +861,6 @@ struct hda_codec {
>  	unsigned int no_sticky_stream:1; /* no sticky-PCM stream assignment */
>  	unsigned int pins_shutup:1;	/* pins are shut up */
>  	unsigned int no_trigger_sense:1; /* don't trigger at pin-sensing */
> -	unsigned int ignore_misc_bit:1; /* ignore MISC_NO_PRESENCE bit */
>  	unsigned int no_jack_detect:1;	/* Machine has no jack-detection */
>  	unsigned int pcm_format_first:1; /* PCM format must be set first */
>  	unsigned int epss:1;		/* supporting EPSS? */
> diff --git a/sound/pci/hda/hda_jack.c b/sound/pci/hda/hda_jack.c
> index aaccc02..c9333c9 100644
> --- a/sound/pci/hda/hda_jack.c
> +++ b/sound/pci/hda/hda_jack.c
> @@ -26,9 +26,8 @@ bool is_jack_detectable(struct hda_codec *codec, hda_nid_t nid)
>  		return false;
>  	if (!(snd_hda_query_pin_caps(codec, nid) & AC_PINCAP_PRES_DETECT))
>  		return false;
> -	if (!codec->ignore_misc_bit &&
> -	    (get_defcfg_misc(snd_hda_codec_get_pincfg(codec, nid)) &
> -	     AC_DEFCFG_MISC_NO_PRESENCE))
> +	if (get_defcfg_misc(snd_hda_codec_get_pincfg(codec, nid)) &
> +	     AC_DEFCFG_MISC_NO_PRESENCE)
>  		return false;
>  	if (!(get_wcaps(codec, nid) & AC_WCAP_UNSOL_CAP))
>  		return false;
> -- 
> 1.7.9.5
> 

  reply	other threads:[~2012-09-07 10:01 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-09-07  5:25 [PATCH] ALSA: hda - Remove ignore_misc_bit David Henningsson
2012-09-07 10:01 ` Takashi Iwai [this message]
2012-09-07 11:26   ` David Henningsson
2012-09-07 11:59     ` Takashi Iwai
2012-09-07 12:17       ` David Henningsson
2012-09-07 12:36         ` Takashi Iwai
2012-09-07 12:47           ` David Henningsson
2012-09-07 13:09             ` Takashi Iwai
2012-09-07 14:28               ` David Henningsson
2012-09-07 14:32                 ` Takashi Iwai
2012-09-07 15:39                   ` Tanu Kaskinen
     [not found]             ` <CAN8cciYOMpjXfEpQxYFwTve94rz_LLzJyA=nBdCCdtwOJ5Lnbw@mail.gmail.com>
2012-09-17  8:44               ` Raymond Yau
2012-09-08  1:10 ` Raymond Yau
2012-09-09  7:50   ` Takashi Iwai
2012-09-14  2:10     ` Raymond Yau
2012-09-17  7:39     ` David Henningsson
2012-09-18  8:26       ` Takashi Iwai
2012-09-18  8:40         ` David Henningsson
2012-09-18  8:58           ` Takashi Iwai
2012-09-19  0:35       ` Raymond Yau
2012-09-25 15:38         ` Raymond Yau
2012-09-19 15:20       ` Raymond Yau

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=s5hligmw3s0.wl%tiwai@suse.de \
    --to=tiwai@suse.de \
    --cc=939161@bugs.launchpad.net \
    --cc=alsa-devel@alsa-project.org \
    --cc=david.henningsson@canonical.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).