From: Takashi Iwai <tiwai@suse.de>
To: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Cc: alsa-devel@alsa-project.org, broonie@kernel.org,
pierre-louis.bossart@linux.intel.com
Subject: Re: [PATCH] ASoC: SOF: Intel: hda: Initialize HDA controller after i915 init
Date: Wed, 07 Aug 2019 10:34:03 +0200 [thread overview]
Message-ID: <s5hmuglml1g.wl-tiwai@suse.de> (raw)
In-Reply-To: <20190806221958.19180-1-ranjani.sridharan@linux.intel.com>
On Wed, 07 Aug 2019 00:19:58 +0200,
Ranjani Sridharan wrote:
>
> On some platforms, sound card registration fails when a HDMI
> monitor is not connected. This is caused by a recent commit
> that switched the order in which the HDA controller and the
> i915 are initialized. Initializing the i915 before initializing
> the HDA controller fixes the problem.
>
> Fixes: be1b577d01787c ("ASoC: SOF: Intel: hda: fix the hda init chip"
The closing parenthesis missing.
The code change itself looks OK to me.
Reviewed-by: Takashi Iwai <tiwai@suse.de>
thanks,
Takashi
> Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
> ---
> sound/soc/sof/intel/hda.c | 20 +++++++++++++-------
> 1 file changed, 13 insertions(+), 7 deletions(-)
>
> diff --git a/sound/soc/sof/intel/hda.c b/sound/soc/sof/intel/hda.c
> index 79cce20666b6..724a494702fa 100644
> --- a/sound/soc/sof/intel/hda.c
> +++ b/sound/soc/sof/intel/hda.c
> @@ -335,10 +335,23 @@ static int hda_init_caps(struct snd_sof_dev *sdev)
> if (bus->ppcap)
> dev_dbg(sdev->dev, "PP capability, will probe DSP later.\n");
>
> +#if IS_ENABLED(CONFIG_SND_SOC_SOF_HDA)
> + /* init i915 and HDMI codecs */
> + ret = hda_codec_i915_init(sdev);
> + if (ret < 0) {
> + dev_err(sdev->dev, "error: init i915 and HDMI codec failed\n");
> + return ret;
> + }
> +#endif
> +
> + /* Init HDA controller after i915 init */
> ret = hda_dsp_ctrl_init_chip(sdev, true);
> if (ret < 0) {
> dev_err(bus->dev, "error: init chip failed with ret: %d\n",
> ret);
> +#if IS_ENABLED(CONFIG_SND_SOC_SOF_HDA)
> + hda_codec_i915_exit(sdev);
> +#endif
> return ret;
> }
>
> @@ -346,13 +359,6 @@ static int hda_init_caps(struct snd_sof_dev *sdev)
> if (bus->mlcap)
> snd_hdac_ext_bus_get_ml_capabilities(bus);
>
> - /* init i915 and HDMI codecs */
> - ret = hda_codec_i915_init(sdev);
> - if (ret < 0) {
> - dev_err(sdev->dev, "error: no HDMI audio devices found\n");
> - return ret;
> - }
> -
> /* codec detection */
> if (!bus->codec_mask) {
> dev_info(bus->dev, "no hda codecs found!\n");
> --
> 2.17.1
>
next prev parent reply other threads:[~2019-08-07 8:34 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-06 22:19 [PATCH] ASoC: SOF: Intel: hda: Initialize HDA controller after i915 init Ranjani Sridharan
2019-08-07 8:34 ` Takashi Iwai [this message]
2019-08-07 13:30 ` Applied "ASoC: SOF: Intel: hda: Initialize HDA controller after i915 init" to the asoc tree Mark Brown
-- strict thread matches above, loose matches on Subject: below --
2019-07-15 20:34 [PATCH] ASoC: SOF: Intel: hda: Initialize HDA controller after i915 init Ranjani Sridharan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=s5hmuglml1g.wl-tiwai@suse.de \
--to=tiwai@suse.de \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=pierre-louis.bossart@linux.intel.com \
--cc=ranjani.sridharan@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox