From: Takashi Iwai <tiwai@suse.de>
To: "Zhang, Xiong Y" <xiong.y.zhang@intel.com>
Cc: "alsa-devel@alsa-project.org" <alsa-devel@alsa-project.org>,
"intel-gfx@lists.freedesktop.org"
<intel-gfx@lists.freedesktop.org>,
"Vetter, Daniel" <daniel.vetter@intel.com>,
David Henningsson <david.henningsson@canonical.com>
Subject: Re: [PATCH 4/4] ALSA: hda - Wake the codec up on pin/ELD notify events
Date: Thu, 26 Nov 2015 07:25:44 +0100 [thread overview]
Message-ID: <s5hmvu18efr.wl-tiwai@suse.de> (raw)
In-Reply-To: <8082FF9BCB2B054996454E47167FF4EC0B0F2834@SHSMSX104.ccr.corp.intel.com>
On Thu, 26 Nov 2015 07:06:56 +0100,
Zhang, Xiong Y wrote:
>
> > On Wed, 25 Nov 2015 11:57:13 +0100,
> > Zhang, Xiong Y wrote:
> > >
> > > > On Wed, 25 Nov 2015 10:56:51 +0100,
> > > > Zhang, Xiong Y wrote:
> > > > >
> > > > > Recently I always see the following error message during S4 or S3 resume
> > > > with drm-intel-nightly.
> > > > > [ 97.778063] PM: Syncing filesystems ... done.
> > > > > [ 97.801550] Freezing user space processes ... (elapsed 0.002 seconds)
> > > > done.
> > > > > [ 97.804297] PM: Marking nosave pages: [mem
> > 0x00000000-0x00000fff]
> > > > > [ 97.804302] PM: Marking nosave pages: [mem
> > 0x00058000-0x00058fff]
> > > > > [ 97.804305] PM: Marking nosave pages: [mem 0x0009e000-0x000fffff]
> > > > > [ 97.804310] PM: Marking nosave pages: [mem
> > 0x84c11000-0x84c12fff]
> > > > > [ 97.804312] PM: Marking nosave pages: [mem
> > 0x876fc000-0x87746fff]
> > > > > [ 97.804317] PM: Marking nosave pages: [mem
> > 0x8785e000-0x87fe9fff]
> > > > > [ 97.804387] PM: Marking nosave pages: [mem 0x88000000-0xffffffff]
> > > > > [ 97.806363] PM: Basic memory bitmaps created
> > > > > [ 97.806409] PM: Preallocating image memory... done (allocated
> > 321557
> > > > pages)
> > > > > [ 98.150475] PM: Allocated 1286228 kbytes in 0.34 seconds (3783.02
> > > > MB/s)
> > > > > [ 98.150476] Freezing remaining freezable tasks ... (elapsed 0.001
> > seconds)
> > > > done.
> > > > > [ 98.151998] Suspending console(s) (use no_console_suspend to
> > debug)
> > > > > [ 98.173485] hdmi_present_sense: snd_hda_codec_hdmi
> > hdaudioC0D2:
> > > > HDMI status: Codec=2 Pin=6 Presence_Detect=1 ELD_Valid=1
> > > > > [ 99.178150] snd_hda_intel 0000:00:1f.3: spurious response 0x0:0x2,
> > last
> > > > cmd=0x206f2e08
> > > > > [ 99.178151] snd_hda_intel 0000:00:1f.3: spurious response 0x0:0x2,
> > last
> > > > cmd=0x206f2e08
> > > > > [ 99.178151] snd_hda_intel 0000:00:1f.3: spurious response 0x0:0x2,
> > last
> > > > cmd=0x206f2e08
> > > > > [ 99.178152] snd_hda_intel 0000:00:1f.3: spurious response 0x0:0x2,
> > last
> > > > cmd=0x206f2e08
> > > > > [ 99.178152] snd_hda_intel 0000:00:1f.3: spurious response 0x0:0x2,
> > last
> > > > cmd=0x206f2e08
> > > > > [ 99.178153] snd_hda_intel 0000:00:1f.3: spurious response 0x0:0x2,
> > last
> > > > cmd=0x206f2e08
> > > > > [ 99.178153] snd_hda_intel 0000:00:1f.3: spurious response 0x0:0x2,
> > last
> > > > cmd=0x206f2e08
> > > > > [ 99.178154] snd_hda_intel 0000:00:1f.3: spurious response 0x0:0x2,
> > last
> > > > cmd=0x206f2e08
> > > > > [ 99.178154] snd_hda_intel 0000:00:1f.3: spurious response 0x0:0x2,
> > last
> > > > cmd=0x206f2e08
> > > > > [ 99.178155] snd_hda_intel 0000:00:1f.3: spurious response 0x0:0x2,
> > last
> > > > cmd=0x206f2e08
> > > > > [ 99.178162] snd_hda_codec_hdmi hdaudioC0D2: HDMI: ELD buf size
> > is 0,
> > > > force 128
> > > > > [ 101.189709] snd_hda_intel 0000:00:1f.3: azx_get_response timeout,
> > > > switching to polling mode: last cmd=0x206f2f00
> > > > > [ 102.195492] snd_hda_intel 0000:00:1f.3: No response from codec,
> > > > disabling MSI: last cmd=0x206f2f00
> > > > > [ 103.201275] snd_hda_intel 0000:00:1f.3: azx_get_response timeout,
> > > > switching to single_cmd mode: last cmd=0x206f2f00
> > > > > [ 103.201396] azx_single_wait_for_response: 42 callbacks suppressed
> > > > >
> > > > > The bisect result points to this commit.
> > > > > I checked this patch and had one question: if i915 driver wake up ahead of
> > > > snd_hda_intel driver during resume, i915 driver will call audio driver's
> > > > hdmi_present_sense() function through this patch, but the audio interrupt
> > is
> > > > disabled at this moment, how could hdmi_present_sense() get the
> > response
> > > > from codec ?
> > > >
> > > > Yeah, a bad thing happens there. The fix should be simple like below,
> > > > though. Basically the pins are checked in the resume callback in
> > > > anyway, so there is no need to handle the notification during PM.
> > > >
> > > > Could you check whether it works?
> > > >
> > > >
> > > > thanks,
> > > >
> > > > Takashi
> > >
> > > Strange, your patch couldn't get away the error message.
> >
> > OK, then it's not about the race *during* the hd-audio driver
> > resuming or such. I guess it's the other way round: the i915 driver
> > notifies it unnecessarily while it's getting off. The audio part of
> > HDMI controller relies on the i915 power state, so it's screwed up.
> >
> > Check with drm.debug option to see in which code path it's triggered.
> > If it's a call in i915 suspend, the call should be removed not to wake
> > up the audio part unnecessarily.
>
> [Zhang, Xiong Y] it is called in intel_audio_codec_disable() from i915 suspend.
So the call of eld_notifier should be suppressed at suspend.
> ---
> diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c
> index bdb6f226d006..b468fe0e6195 100644
> --- a/sound/pci/hda/patch_hdmi.c
> +++ b/sound/pci/hda/patch_hdmi.c
> @@ -2352,7 +2352,9 @@ static void intel_pin_eld_notify(void *audio_ptr, int port)
> struct hda_codec *codec = audio_ptr;
> int pin_nid = port + 0x04;
>
> - check_presence_and_report(codec, pin_nid);
> + /* don't call notifier during PM; will be checked in resume callback */
> + if (atomic_read(&codec->core.in_pm))
> + check_presence_and_report(codec, pin_nid);
> }
>
> static int patch_generic_hdmi(struct hda_codec *codec)
> >
> This could remove the error message. Go through the audio driver, I found in_pm isn't zero only during call codec_suspend() and codec_resume(). atomic_inc_not_zero(&codec->in_pm) in snd_hdac_power_up_pm() isn't inc in_pm since in_pm is zero.
> Is this right ?
It's the flag that is set only during the sound driver's PM, not i915
driver's PM. I gave the patch from the wrong assumption. It's not
the race between i915 and audio PM, thus the patch doesn't help.
> > BTW, I have a patchset to avoid the audio h/w wakeup by a new
> > component ops to get ELD and connection states. It was posted to
> > alsa-devel shortly ago just as a reference, but this should work well
> > in such a case, too. The test patches are found in test/hdmi-jack
> > branch of my sound git tree.
Did you try this branch (merge onto intel-test-nightly)?
Takashi
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2015-11-26 6:25 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-28 17:02 [PATCH 0/4 v5] i915 to call hda driver on HDMI plug/unplug David Henningsson
2015-08-28 17:02 ` [PATCH 1/4] drm/i915: Add audio pin sense / ELD callback David Henningsson
2015-09-02 11:44 ` Daniel Vetter
2015-08-28 17:02 ` [PATCH 2/4] drm/i915: Call audio pin/ELD notify function David Henningsson
2015-08-28 17:02 ` [PATCH 3/4] ALSA: hda - allow codecs to access the i915 pin/ELD callback David Henningsson
2015-08-28 17:02 ` [PATCH 4/4] ALSA: hda - Wake the codec up on pin/ELD notify events David Henningsson
2015-11-25 9:56 ` Zhang, Xiong Y
2015-11-25 10:07 ` Takashi Iwai
2015-11-25 10:57 ` Zhang, Xiong Y
2015-11-25 11:17 ` Takashi Iwai
2015-11-26 6:06 ` Zhang, Xiong Y
2015-11-26 6:25 ` Takashi Iwai [this message]
2015-11-26 7:57 ` Zhang, Xiong Y
2015-11-26 8:07 ` [Intel-gfx] " Takashi Iwai
2015-11-26 9:16 ` Zhang, Xiong Y
2015-11-26 9:24 ` Takashi Iwai
2015-11-26 15:08 ` David Henningsson
2015-11-26 15:23 ` Takashi Iwai
2015-11-26 15:29 ` David Henningsson
2015-11-26 15:37 ` Imre Deak
2015-11-26 15:43 ` Ville Syrjälä
2015-11-26 15:51 ` Takashi Iwai
2015-11-26 15:58 ` Ville Syrjälä
2015-11-26 16:16 ` Takashi Iwai
2015-11-27 2:55 ` Zhang, Xiong Y
2015-11-27 13:38 ` Takashi Iwai
2015-11-27 13:45 ` David Henningsson
2015-11-27 13:50 ` Takashi Iwai
2015-11-26 15:47 ` Takashi Iwai
2015-11-26 15:48 ` Daniel Vetter
2015-08-28 17:14 ` [PATCH 0/4 v5] i915 to call hda driver on HDMI plug/unplug Jani Nikula
2015-09-02 11:45 ` Daniel Vetter
2015-09-02 11:59 ` Takashi Iwai
2015-09-02 12:14 ` Daniel Vetter
2015-09-03 7:52 ` David Henningsson
2015-09-03 8:31 ` Takashi Iwai
2015-09-03 9:53 ` David Henningsson
2015-09-03 10:29 ` Jani Nikula
-- strict thread matches above, loose matches on Subject: below --
2015-08-19 8:48 [PATCH v4 0/4] " David Henningsson
2015-08-19 8:48 ` [PATCH 4/4] ALSA: hda - Wake the codec up on pin/ELD notify events David Henningsson
2015-08-20 9:28 ` Takashi Iwai
2015-08-20 9:41 ` David Henningsson
2015-08-20 9:46 ` Takashi Iwai
2015-08-28 13:10 ` Jani Nikula
2015-09-02 8:00 ` Daniel Vetter
2015-09-02 8:03 ` Takashi Iwai
2015-09-02 8:32 ` Daniel Vetter
2015-09-02 9:39 ` Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=s5hmvu18efr.wl-tiwai@suse.de \
--to=tiwai@suse.de \
--cc=alsa-devel@alsa-project.org \
--cc=daniel.vetter@intel.com \
--cc=david.henningsson@canonical.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=xiong.y.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox