Alsa-Devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Takashi Iwai <tiwai@suse.de>
To: Matthias Lemke <m@box.li>
Cc: alsa-devel@lists.sourceforge.net
Subject: Re: problem with alsa on Sony UX-90s
Date: Mon, 13 Nov 2006 14:26:36 +0100	[thread overview]
Message-ID: <s5hmz6vbhpv.wl%tiwai@suse.de> (raw)
In-Reply-To: <4558697F.3000004@box.li>

At Mon, 13 Nov 2006 13:47:59 +0100,
Matthias Lemke wrote:
> 
> Takashi Iwai schrieb:
> > At Sat, 11 Nov 2006 14:30:45 +0100,
> > Matthias Lemke wrote:
> >>>>> If none of the existing model matches with yours, we'd need to create
> >>>>> a new model.  Load the driver without model option, and show the
> >>>>> content of /proc/asound/card0/codec#* file.  If we have luck, the BIOS
> >>>>> sets up a speaker pin...
> >>>> I added this output to my bug:
> >>>> https://bugtrack.alsa-project.org/alsa-bug/view.php?id=2605
> >>> Please post it to here, too.  (Honestly I hate debugging on BTS with a
> >>> bad interface :)
> >> ok, some models working!
> >> for instance basic, hippo.
> >> I assume I have a mono speaker. So every model with a "mono" channel
> >> works. Auto has no Mono channel.
> >> Also the internal Mic works. I cant check line in at the moment...
> >> auto doesnt work correctly.
> > 
> > The difference between basic and hippo models is that hippo supports
> > the HP-jack detection and mutes the speaker automatically.  Does the
> > auto-mute work on your machine?
> 
> what do You mean?
> 
> with hippo and with basic i have the following behaviour:
> 
> - speaker switches off while inserting headphones
> - alsamixer shows no muting automatically while inserting
> 
> should I check some other things?

I meant the former.  It seems that the auto-mute is working well.


> > Also hippo adds the digital output support, but it would be harmless
> > anyway even if the device has no SPDIF output.
> 
> ok, no SPDIF here...
> 
> > 
> >> should we do some´additions in the code for autoconfig?
> > 
> > If the auto-mute is working and there is no obvious missing function,
> > we can add the entry for your device to the driver code so that
> > model=hippo will be chosen automatically in future.  Then let me know
> > the output of "lspci -nv" (only for class 0403 entry) to add the
> > corresponding PCI SSID.
> 
> 00:1b.0 0403: 8086:27d8 (rev 02)
>         Subsystem: 104d:8203
>         Flags: bus master, fast devsel, latency 0, IRQ 66
>         Memory at d4340000 (64-bit, non-prefetchable) [size=16K]
>         Capabilities: [50] Power Management version 2
>         Capabilities: [60] Message Signalled Interrupts: 64bit+
> Queue=0/0 Enable+
>         Capabilities: [70] Express Unknown type IRQ 0
>         Capabilities: [100] Virtual Channel
>         Capabilities: [130] Unknown (5)

Thanks.  Please try the patch below and remove model=* option from
modprobe config file.


Takashi

diff -r 2c5aac411cf6 pci/hda/patch_realtek.c
--- a/pci/hda/patch_realtek.c	Thu Nov 09 16:47:26 2006 +0100
+++ b/pci/hda/patch_realtek.c	Mon Nov 13 14:25:03 2006 +0100
@@ -6438,6 +6438,9 @@ static struct hda_board_config alc262_cf
 	{ .modelname = "hippo",
 	  .pci_subvendor =0x1002, .pci_subdevice = 0x437b,
 	  .config = ALC262_HIPPO},
+	{ .modelname = "hippo",
+	  .pci_subvendor = 0x104d, .pci_subdevice = 0x8203,
+	  .config = ALC262_HIPPO }, /* Sony UX-90s */
 	{ .modelname = "hippo_1",
 	  .pci_subvendor =0x17ff, .pci_subdevice = 0x058f,
 	  .config = ALC262_HIPPO_1},

-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642

  reply	other threads:[~2006-11-13 13:26 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2006-11-09 15:28 problem with alsa on Sony UX-90s Matthias Lemke
2006-11-10 11:36 ` Takashi Iwai
2006-11-10 12:19   ` Matthias Lemke
2006-11-10 13:22     ` Takashi Iwai
2006-11-11 13:30       ` Matthias Lemke
2006-11-13 11:21         ` Takashi Iwai
2006-11-13 12:47           ` Matthias Lemke
2006-11-13 13:26             ` Takashi Iwai [this message]
2006-11-14 11:20               ` Matthias Lemke
2006-11-14 11:31                 ` Takashi Iwai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=s5hmz6vbhpv.wl%tiwai@suse.de \
    --to=tiwai@suse.de \
    --cc=alsa-devel@lists.sourceforge.net \
    --cc=m@box.li \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox