From: Takashi Iwai <tiwai@suse.de>
To: mase <inyourface@gmx.de>
Cc: alsa-devel@lists.sourceforge.net
Subject: Re: snd-hda-intel on fj amilo m3438g
Date: Mon, 23 Jan 2006 18:56:16 +0100 [thread overview]
Message-ID: <s5hpsmiq14v.wl%tiwai@suse.de> (raw)
In-Reply-To: <200601162157.42643.inyourface@gmx.de>
At Mon, 16 Jan 2006 21:57:42 +0100,
mase wrote:
>
> hi!
> it's me again!
> i have installed alsa-1.0.11rc2 and set the model to auto.
> Now loopback works fine, but recording sounds terrible.
You can get the snapshot of widget connections by saving the content
of the corresponding /proc/asound/card0/codec#* file. This is
important to write new init verb and mixer element tables.
Takashi
>
> >
> > > hi!
> > > can you please help me?
> > > i have a fujitsu siemens amilo m3438g notebook with a
> > > realtek alc880 (windows says so) soundchip.
> > > the sound output works fine, but none of the inputs,
> > > neither built-in mic, nor external mic.
> > > the notebook has 2 jacks:
> > > 1 for mic and 1 for headphones shared with spdif.
> > > i have tested different models: auto, w810 F1734,uniwill, asus,
> > > z71v, 3stack
> > > i could test all models, but the others couldn't be, i think, but i
> > > will.
> > > the output of lspci -nv:
> > >
> > > 0000:00:00.0 0600: 8086:2590 (rev 04)
> > > Subsystem: 1734:107c
> > > Flags: bus master, fast devsel, latency 0
> > > Capabilities: <available only to root>
> > >
> > > 0000:00:01.0 0604: 8086:2591 (rev 04)
> > > Flags: bus master, fast devsel, latency 0
> > > Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
> > > Memory behind bridge: faa00000-feafffff
> > > Prefetchable memory behind bridge: bfe00000-dfefffff
> > > Capabilities: <available only to root>
> > >
> > > 0000:00:1b.0 0403: 8086:2668 (rev 04)
> > > Subsystem: 1734:107c
> > > Flags: bus master, fast devsel, latency 0, IRQ 16
> > > Memory at febf8000 (64-bit, non-prefetchable) [size=16K]
> > > Capabilities: <available only to root>
> > >
> > > 0000:00:1c.0 0604: 8086:2660 (rev 04)
> > > Flags: bus master, fast devsel, latency 0
> > > Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
> > > I/O behind bridge: 0000d000-0000dfff
> > > Memory behind bridge: bfc00000-bfcfffff
> > > Prefetchable memory behind bridge:
> > > 00000000bfd00000-00000000bfd00000 Capabilities: <available only to root>
> > >
> > > 0000:00:1d.0 0c03: 8086:2658 (rev 04)
> > > Subsystem: 1734:107c
> > > Flags: bus master, medium devsel, latency 0, IRQ 19
> > > I/O ports at e480 [size=32]
> > >
> > > 0000:00:1d.1 0c03: 8086:2659 (rev 04)
> > > Subsystem: 1734:107c
> > > Flags: bus master, medium devsel, latency 0, IRQ 17
> > > I/O ports at e800 [size=32]
> > >
> > > 0000:00:1d.2 0c03: 8086:265a (rev 04)
> > > Subsystem: 1734:107c
> > > Flags: bus master, medium devsel, latency 0, IRQ 18
> > > I/O ports at e880 [size=32]
> > >
> > > 0000:00:1d.3 0c03: 8086:265b (rev 04)
> > > Subsystem: 1734:107c
> > > Flags: bus master, medium devsel, latency 0, IRQ 16
> > > I/O ports at ec00 [size=32]
> > >
> > > 0000:00:1d.7 0c03: 8086:265c (rev 04) (prog-if 20)
> > > Subsystem: 1734:107c
> > > Flags: bus master, medium devsel, latency 0, IRQ 19
> > > Memory at febffc00 (32-bit, non-prefetchable) [size=1K]
> > > Capabilities: <available only to root>
> > >
> > > 0000:00:1e.0 0604: 8086:2448 (rev d4) (prog-if 01)
> > > Flags: bus master, fast devsel, latency 0
> > > Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
> > > I/O behind bridge: 00001000-00001fff
> > > Memory behind bridge: fa900000-fa9fffff
> > > Prefetchable memory behind bridge:
> > > 0000000050000000-0000000050000000 Capabilities: <available only to root>
> > >
> > > 0000:00:1f.0 0601: 8086:2641 (rev 04)
> > > Subsystem: 1734:107c
> > > Flags: bus master, medium devsel, latency 0
> > >
> > > 0000:00:1f.1 0101: 8086:266f (rev 04) (prog-if 8a [Master SecP PriP])
> > > Subsystem: 1734:107c
> > > Flags: bus master, medium devsel, latency 0, IRQ 18
> > > I/O ports at <unassigned>
> > > I/O ports at <unassigned>
> > > I/O ports at <unassigned>
> > > I/O ports at <unassigned>
> > > I/O ports at ffa0 [size=16]
> > >
> > > 0000:00:1f.3 0c05: 8086:266a (rev 04)
> > > Subsystem: 1734:107c
> > > Flags: medium devsel, IRQ 10
> > > I/O ports at 0400 [size=32]
> > >
> > > 0000:01:03.0 0280: 8086:4220 (rev 05)
> > > Subsystem: 8086:2702
> > > Flags: bus master, medium devsel, latency 64, IRQ 17
> > > Memory at fa9fe000 (32-bit, non-prefetchable) [size=4K]
> > > Capabilities: <available only to root>
> > >
> > > 0000:01:04.0 0c00: 104c:8023 (prog-if 10)
> > > Subsystem: 1734:107c
> > > Flags: bus master, medium devsel, latency 64, IRQ 18
> > > Memory at fa9ff000 (32-bit, non-prefetchable) [size=2K]
> > > Memory at fa9f8000 (32-bit, non-prefetchable) [size=16K]
> > > Capabilities: <available only to root>
> > >
> > > 0000:01:05.0 0200: 10ec:8169 (rev 10)
> > > Subsystem: 1734:107c
> > > Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 17
> > > I/O ports at c800 [size=256]
> > > Memory at fa9ffc00 (32-bit, non-prefetchable) [size=256]
> > > Expansion ROM at 50000000 [disabled] [size=128K]
> > > Capabilities: <available only to root>
> > >
> > > 0000:01:07.0 0104: 1106:3249 (rev 50)
> > > Subsystem: 1734:107c
> > > Flags: bus master, medium devsel, latency 64, IRQ 16
> > > I/O ports at 1420 [size=16]
> > > I/O ports at 1430 [size=16]
> > > I/O ports at 1440 [size=16]
> > > I/O ports at 1450 [size=16]
> > > I/O ports at 1400 [size=32]
> > > I/O ports at 1000 [size=256]
> > > Capabilities: <available only to root>
> > >
> > > 0000:03:00.0 0300: 10de:00c8 (rev a2)
> > > Subsystem: 1734:107c
> > > Flags: bus master, fast devsel, latency 0, IRQ 16
> > > Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
> > > Memory at c0000000 (64-bit, prefetchable) [size=256M]
> > > Memory at fc000000 (64-bit, non-prefetchable) [size=16M]
> > > Expansion ROM at feae0000 [disabled] [size=128K]
> > > Capabilities: <available only to root>
>
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=103432&bid=230486&dat=121642
prev parent reply other threads:[~2006-01-23 17:56 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-01-12 18:00 snd-hda-intel on fj amilo m3438g mase
2006-01-12 18:22 ` Takashi Iwai
[not found] ` <200601121955.04818.inyourface@gmx.de>
2006-01-12 19:28 ` Takashi Iwai
2006-01-12 20:12 ` Lee Revell
[not found] ` <200601161924.39810.inyourface@gmx.de>
[not found] ` <200601162157.42643.inyourface@gmx.de>
2006-01-23 17:56 ` Takashi Iwai [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=s5hpsmiq14v.wl%tiwai@suse.de \
--to=tiwai@suse.de \
--cc=alsa-devel@lists.sourceforge.net \
--cc=inyourface@gmx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox