From: Takashi Iwai <tiwai@suse.de>
To: Gou Zhuang <gouzhuang@bigfoot.com>
Cc: alsa-devel@lists.sourceforge.net
Subject: Re: Oops on resume, X crashes
Date: Thu, 23 Oct 2003 20:01:03 +0200 [thread overview]
Message-ID: <s5hptgn96lc.wl@alsa2.suse.de> (raw)
In-Reply-To: <3F979B68.9030006@bigfoot.com>
[-- Attachment #1: Type: text/plain, Size: 1700 bytes --]
At Thu, 23 Oct 2003 17:12:08 +0800,
Gou Zhuang wrote:
> I turned on OSS_DEBUG in pcm_oss.c. I did not start X this time, I only started artsd from
> console to reproduce the oops. Below is the messages after resume, my comments are marked
> with <<<---------
>
> -------------------------
> MYDEBUG intel8x0.c:2141: Entering intel8x0_suspend()
> MYDEBUG intel8x0.c:2149: Call snd_pcm_suspend_all() on Intel 82801CA-ICH3
> MYDEBUG intel8x0.c:2149: Call snd_pcm_suspend_all() on Intel 82801CA-ICH3 - MIC ADC
> MYDEBUG intel8x0.c:2152: Call snd_power_change_state(card, SNDRV_CTL_POWER_D3hot)
> MYDEBUG intel8x0.c:2154: Return from snd_power_change_state()
> pcm_oss: ioctl = 0x8010500c
> pcm_oss: space: bytes = 7168, fragments = 7, fragstotal = 7, fragsize = 1024
> pcm_oss: write: recovering from SUSPEND
> ALSA pcm_oss.c:552: snd_pcm_oss_prepare: SNDRV_PCM_IOCTL_PREPARE failed
> pcm_oss: write 1024 bytes (wrote -11 bytes) <<<----------- IT SEEMS THE WRITE FAILED!
that's ok, because it's opened with non-block mode.
> MYDEBUG intel8x0.c:2162: Entering intel8x0_resume()
> MYDEBUG intel8x0.c:2167: Call pci_enable_device(chip->pci)
> PCI: Found IRQ 11 for device 00:1f.5
> PCI: Sharing IRQ 11 with 00:1f.6
> MYDEBUG intel8x0.c:2169: Call pci_set_master(chip->pci)
> PCI: Setting latency timer of device 00:1f.5 to 64
> MYDEBUG intel8x0.c:2067: Entering snd_intel8x0_chip_init()
> MYDEBUG ../../alsa-kernel/pci/ac97/ac97_codec.c:2148: Entering snd_ac97_resume()
> MYDEBUG ../../alsa-kernel/pci/ac97/ac97_codec.c:2148: Entering snd_ac97_resume()
> MYDEBUG intel8x0.c:2177: Call snd_power_change_state(card, SNDRV_CTL_POWER_D0)
ok, i think i found a bug.
please try the attached patch.
Takashi
[-- Attachment #2: pm-oops-fix.dif --]
[-- Type: application/octet-stream, Size: 1304 bytes --]
Index: alsa-kernel/core/init.c
===================================================================
RCS file: /suse/tiwai/cvs/alsa/alsa-kernel/core/init.c,v
retrieving revision 1.35
diff -u -r1.35 init.c
--- alsa-kernel/core/init.c 23 Oct 2003 17:00:13 -0000 1.35
+++ alsa-kernel/core/init.c 23 Oct 2003 17:55:43 -0000
@@ -679,6 +679,7 @@
int snd_power_wait(snd_card_t *card, unsigned int power_state, struct file *file)
{
wait_queue_t wait;
+ int result = 0;
/* fastpath */
if (snd_power_get_state(card) == power_state)
@@ -686,18 +687,22 @@
init_waitqueue_entry(&wait, current);
add_wait_queue(&card->power_sleep, &wait);
while (1) {
- if (card->shutdown)
- return -ENODEV;
- if (snd_power_get_state(card) == power_state) {
- remove_wait_queue(&card->power_sleep, &wait);
- return 0;
+ if (card->shutdown) {
+ result = -ENODEV;
+ break;
+ }
+ if (snd_power_get_state(card) == power_state)
+ break;
+ if (file && (file->f_flags & O_NONBLOCK)) {
+ result = -EAGAIN;
+ break;
}
- if (file && (file->f_flags & O_NONBLOCK))
- return -EAGAIN;
set_current_state(TASK_UNINTERRUPTIBLE);
snd_power_unlock(card);
schedule_timeout(30 * HZ);
snd_power_lock(card);
}
+ remove_wait_queue(&card->power_sleep, &wait);
+ return result;
}
#endif /* CONFIG_PM */
next prev parent reply other threads:[~2003-10-23 18:01 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-10-20 7:48 Oops on resume, X crashes Gou Zhuang
2003-10-20 14:48 ` Takashi Iwai
[not found] ` <3F94F094.80109@Sun.COM>
2003-10-21 11:29 ` Takashi Iwai
2003-10-23 9:12 ` Gou Zhuang
2003-10-23 18:01 ` Takashi Iwai [this message]
2003-10-24 5:45 ` Gou Zhuang
2003-10-24 10:12 ` Takashi Iwai
2003-10-27 1:03 ` Gou Zhuang
-- strict thread matches above, loose matches on Subject: below --
2003-10-20 6:42 Gou Zhuang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=s5hptgn96lc.wl@alsa2.suse.de \
--to=tiwai@suse.de \
--cc=alsa-devel@lists.sourceforge.net \
--cc=gouzhuang@bigfoot.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox