Alsa-Devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Takashi Iwai <tiwai@suse.de>
To: Anton Yakovlev <anton.yakovlev@opensynergy.com>
Cc: virtio-dev@lists.oasis-open.org, alsa-devel@alsa-project.org,
	"Michael S. Tsirkin" <mst@redhat.com>,
	linux-kernel@vger.kernel.org, Takashi Iwai <tiwai@suse.com>,
	virtualization@lists.linux-foundation.org
Subject: Re: [PATCH v6 6/9] ALSA: virtio: PCM substream operators
Date: Sun, 28 Feb 2021 12:32:46 +0100	[thread overview]
Message-ID: <s5hr1l0juld.wl-tiwai@suse.de> (raw)
In-Reply-To: <20210227085956.1700687-7-anton.yakovlev@opensynergy.com>

On Sat, 27 Feb 2021 09:59:53 +0100,
Anton Yakovlev wrote:
> 
> +static int virtsnd_pcm_trigger(struct snd_pcm_substream *substream, int command)
> +{
> +	struct virtio_pcm_substream *vss = snd_pcm_substream_chip(substream);
> +	struct virtio_snd *snd = vss->snd;
> +	struct virtio_snd_msg *msg;
> +	unsigned long flags;
> +	int rc;
> +
> +	switch (command) {
> +	case SNDRV_PCM_TRIGGER_START:
> +	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: {
> +		struct virtio_snd_queue *queue = virtsnd_pcm_queue(vss);
> +
> +		spin_lock_irqsave(&queue->lock, flags);
> +		spin_lock(&vss->lock);
> +		rc = virtsnd_pcm_msg_send(vss);
> +		if (!rc)
> +			vss->xfer_enabled = true;
> +		spin_unlock(&vss->lock);
> +		spin_unlock_irqrestore(&queue->lock, flags);
> +		if (rc)
> +			return rc;
> +
> +		msg = virtsnd_pcm_ctl_msg_alloc(vss, VIRTIO_SND_R_PCM_START,
> +						GFP_KERNEL);

If we drop nonatomic PCM, this has to be changed: GFP_KERNEL is no
longer valid in the trigger and the pointer callbacks.
I wonder, though, the code below uses GFP_ATOMIC inconsistently...

> +	case SNDRV_PCM_TRIGGER_STOP:
> +	case SNDRV_PCM_TRIGGER_PAUSE_PUSH: {
> +		spin_lock_irqsave(&vss->lock, flags);
> +		vss->xfer_enabled = false;
> +		spin_unlock_irqrestore(&vss->lock, flags);
> +
> +		/*
> +		 * The substream needs to be released on the device side only
> +		 * when it is completely stopped.
> +		 */
> +		vss->release = (command == SNDRV_PCM_TRIGGER_STOP);
> +
> +		/*
> +		 * The STOP command can be issued in an atomic context after
> +		 * the drain is complete. Therefore, in general, we cannot sleep
> +		 * here.
> +		 */
> +		msg = virtsnd_pcm_ctl_msg_alloc(vss, VIRTIO_SND_R_PCM_STOP,
> +						GFP_ATOMIC);

BTW...
> +	default: {
> +		return -EINVAL;
> +	}

Let's avoid braces inside the switch() unless it's inevitably needed.
It makes the code harder to read.


> +static snd_pcm_uframes_t
> +virtsnd_pcm_pointer(struct snd_pcm_substream *substream)
> +{
> +	struct virtio_pcm_substream *vss = snd_pcm_substream_chip(substream);
> +	snd_pcm_uframes_t hw_ptr = SNDRV_PCM_POS_XRUN;
> +	unsigned long flags;
> +
> +	spin_lock_irqsave(&vss->lock, flags);
> +	if (!vss->xfer_xrun)
> +		hw_ptr = bytes_to_frames(substream->runtime, vss->hw_ptr);
> +	spin_unlock_irqrestore(&vss->lock, flags);

Oh, and if we drop nonatomc PCM, both trigger and pointer callbacks
are guaranteed to be called inside the spinlock, hence you can remove
*_irqsave() but just us spin_lock() in those two callbacks.


thanks,

Takashi

  reply	other threads:[~2021-02-28 11:33 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-02-27  8:59 [PATCH v6 0/9] ALSA: add virtio sound driver Anton Yakovlev
2021-02-27  8:59 ` [PATCH v6 1/9] uapi: virtio_ids: add a sound device type ID from OASIS spec Anton Yakovlev
2021-02-27  8:59 ` [PATCH v6 2/9] ALSA: virtio: add virtio sound driver Anton Yakovlev
2021-02-27  8:59 ` [PATCH v6 3/9] ALSA: virtio: handling control messages Anton Yakovlev
2021-02-28 11:04   ` Takashi Iwai
2021-02-28 18:39     ` Anton Yakovlev
2021-02-27  8:59 ` [PATCH v6 4/9] ALSA: virtio: build PCM devices and substream hardware descriptors Anton Yakovlev
2021-02-28 11:15   ` Takashi Iwai
2021-02-27  8:59 ` [PATCH v6 5/9] ALSA: virtio: handling control and I/O messages for the PCM device Anton Yakovlev
2021-02-28 11:27   ` Takashi Iwai
2021-03-01  9:25     ` Anton Yakovlev
2021-03-01 13:32       ` Takashi Iwai
2021-03-01 14:47         ` Anton Yakovlev
2021-03-01 14:56           ` Takashi Iwai
2021-03-01 15:24             ` Anton Yakovlev
2021-03-01 15:30               ` Takashi Iwai
2021-02-27  8:59 ` [PATCH v6 6/9] ALSA: virtio: PCM substream operators Anton Yakovlev
2021-02-28 11:32   ` Takashi Iwai [this message]
2021-03-01  9:29     ` Anton Yakovlev
2021-03-01 13:33       ` Takashi Iwai
2021-02-27  8:59 ` [PATCH v6 7/9] ALSA: virtio: introduce jack support Anton Yakovlev
2021-02-27  8:59 ` [PATCH v6 8/9] ALSA: virtio: introduce PCM channel map support Anton Yakovlev
2021-02-27  8:59 ` [PATCH v6 9/9] ALSA: virtio: introduce device suspend/resume support Anton Yakovlev
2021-02-28 12:05   ` Takashi Iwai
2021-03-01 10:03     ` Anton Yakovlev
2021-03-01 13:38       ` Takashi Iwai
2021-03-01 15:30         ` Anton Yakovlev
2021-03-02  6:29     ` Anton Yakovlev
2021-03-02  6:48       ` Takashi Iwai
2021-03-02  8:09         ` Anton Yakovlev
2021-03-02  9:11           ` Takashi Iwai
2021-03-02 15:35             ` Anton Yakovlev

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=s5hr1l0juld.wl-tiwai@suse.de \
    --to=tiwai@suse.de \
    --cc=alsa-devel@alsa-project.org \
    --cc=anton.yakovlev@opensynergy.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mst@redhat.com \
    --cc=tiwai@suse.com \
    --cc=virtio-dev@lists.oasis-open.org \
    --cc=virtualization@lists.linux-foundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox