Re: Intel8x0 problems with rc1

[Takashi Iwai <tiwai@suse.de>]

At Wed, 03 Dec 2003 15:47:23 +0100,
Thomas Charbonnel wrote:
> 
> Takashi Iwai wrote :
> 
> >>Takashi, I applied your patch but nothings shows up in my logs.
> >>I even replaced all the KERN_DEBUG by KERN_EMERG, and still nothing.
> >>The only thing I get is this :
> >>ALSA intel8x0.c:568: codec_semaphore: semaphore is not ready [0x1][0x300100]
> >>ALSA intel8x0.c:599: codec_read 0: semaphore is not ready for register 0x56
> > 
> > 
> > and the driver still works somehow?
> > 
> > 
> >>Is it possible that your code never gets called ?
> > 
> > 
> > if the driver works, it must not happen.
> > 
> > 
> > Takashi
> 
> Ok, my fault, sorry Takashi, I stupidly reloaded only the snd-intel8x0 
> module and forgot snd-ac97-codec, here's the log :
> 
> ac97_pcm_open: rate = 48000, cfg = 2, slots = 0x198
> setting ac97 reg 0x2c to rate 48000
> setting ac97 reg 0x2e to rate 48000
> ALSA ../../alsa-kernel/pci/ac97/ac97_pcm.c:561: error in 
> snd_ac97_set_rate: cidx=0, reg=0x2e, rate=48000
> , err=-22<0>ac97_pcm_open: rate = 48000, cfg = 2, slots = 0x198
> 
> (The file's rate was 44100 kHz)

didn't you get any messages before this?
it should be something like

checking codec 0, slot = 0xxx / 0xxx
probing pcm 0
  ....


Takashi


-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program.
Does SourceForge.net help you be more productive?  Does it
help you create better code?  SHARE THE LOVE, and help us help
YOU!  Click Here: http://sourceforge.net/donate/