From: Takashi Iwai <tiwai@suse.de>
To: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Cc: alsa-devel@alsa-project.org
Subject: Re: [PATCH alsa-lib] conf/ucm: ROCKCHIP-I2S: add Rockchip I2S UCM config.
Date: Mon, 09 May 2016 15:00:04 +0200 [thread overview]
Message-ID: <s5hshxrpesr.wl-tiwai@suse.de> (raw)
In-Reply-To: <1462429926-9464-1-git-send-email-enric.balletbo@collabora.com>
On Thu, 05 May 2016 08:32:06 +0200,
Enric Balletbo i Serra wrote:
>
> Taken from the ChromeOS sources, this configuration was tested on Veyron
> Jerry based Chromebook from Google.
>
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Applied now. The necessary changes for Makefile.am and
src/conf/ucm/ROCKCHIP-I2S/Makefile.am were missing, so I added them
manually.
thanks,
Takashi
> ---
> src/conf/ucm/Makefile.am | 2 +-
> src/conf/ucm/ROCKCHIP-I2S/HiFi.conf | 94 +++++++++++++++++++++++++++++
> src/conf/ucm/ROCKCHIP-I2S/ROCKCHIP-I2S.conf | 6 ++
> 3 files changed, 101 insertions(+), 1 deletion(-)
> create mode 100644 src/conf/ucm/ROCKCHIP-I2S/HiFi.conf
> create mode 100644 src/conf/ucm/ROCKCHIP-I2S/ROCKCHIP-I2S.conf
>
> diff --git a/src/conf/ucm/Makefile.am b/src/conf/ucm/Makefile.am
> index e6a6325..d1d51e5 100644
> --- a/src/conf/ucm/Makefile.am
> +++ b/src/conf/ucm/Makefile.am
> @@ -1 +1 @@
> -SUBDIRS=DAISY-I2S PandaBoard PandaBoardES SDP4430 tegraalc5632 PAZ00 GoogleNyan broadwell-rt286
> +SUBDIRS=DAISY-I2S PandaBoard PandaBoardES SDP4430 tegraalc5632 PAZ00 GoogleNyan broadwell-rt286 ROCKCHIP-I2S
> diff --git a/src/conf/ucm/ROCKCHIP-I2S/HiFi.conf b/src/conf/ucm/ROCKCHIP-I2S/HiFi.conf
> new file mode 100644
> index 0000000..7bfe995
> --- /dev/null
> +++ b/src/conf/ucm/ROCKCHIP-I2S/HiFi.conf
> @@ -0,0 +1,94 @@
> +SectionVerb {
> + Value {
> + OutputDspName "speaker_eq"
> + MinBufferLevel "512"
> + }
> +
> + EnableSequence [
> + cdev "hw:ROCKCHIPI2S"
> +
> + cset "name='Left Speaker Mixer Left DAC Switch' on"
> + cset "name='Right Speaker Mixer Right DAC Switch' on"
> + cset "name='Headphone Left Switch' off"
> + cset "name='Headphone Right Switch' off"
> + cset "name='Digital EQ 3 Band Switch' off"
> + cset "name='Digital EQ 5 Band Switch' off"
> + cset "name='Digital EQ 7 Band Switch' off"
> + cset "name='Biquad Switch' off"
> + cset "name='Filter Mode' Music"
> + cset "name='ADC Oversampling Rate' 0"
> +
> + cset "name='DMIC Mux' DMIC"
> + cset "name='MIC2 Mux' IN34"
> + cset "name='Right ADC Mixer MIC2 Switch' on"
> + cset "name='Left ADC Mixer MIC2 Switch' on"
> + cset "name='MIC2 Volume' 20"
> + cset "name='Headset Mic Switch' off"
> + cset "name='Int Mic Switch' on"
> +
> + cset "name='ADCR Boost Volume' 4"
> + cset "name='ADCL Boost Volume' 4"
> + cset "name='ADCR Volume' 11"
> + cset "name='ADCL Volume' 11"
> +
> + cset "name='Left Speaker Mixer Left DAC Switch' on"
> + cset "name='Right Speaker Mixer Right DAC Switch' on"
> + cset "name='Speaker Left Mixer Volume' 2"
> + cset "name='Speaker Right Mixer Volume' 2"
> + cset "name='Record Path DC Blocking' on"
> + cset "name='Playback Path DC Blocking' on"
> +
> + cset "name='Speaker Left Switch' on"
> + cset "name='Speaker Right Switch' on"
> + cset "name='Speaker Switch' on"
> + ]
> +
> + DisableSequence [
> + ]
> +}
> +
> +SectionDevice."Headphone".0 {
> + Value {
> + JackName "ROCKCHIP-I2S Headset Jack"
> + OutputDspName ""
> + }
> +
> + EnableSequence [
> + cdev "hw:ROCKCHIPI2S"
> +
> + cset "name='Speaker Switch' off"
> + cset "name='Headphone Left Switch' on"
> + cset "name='Headphone Right Switch' on"
> + ]
> + DisableSequence [
> + cdev "hw:ROCKCHIPI2S"
> +
> + cset "name='Headphone Left Switch' off"
> + cset "name='Headphone Right Switch' off"
> + cset "name='Speaker Switch' on"
> + ]
> +}
> +
> +SectionDevice."Mic".0 {
> + Value {
> + JackName "ROCKCHIP-I2S Headset Jack"
> + }
> +
> + EnableSequence [
> + cdev "hw:ROCKCHIPI2S"
> +
> + cset "name='Int Mic Switch' off"
> + cset "name='DMIC Mux' ADC"
> + cset "name='Headset Mic Switch' on"
> + cset "name='Record Path DC Blocking' on"
> + ]
> +
> + DisableSequence [
> + cdev "hw:ROCKCHIPI2S"
> +
> + cset "name='Headset Mic Switch' off"
> + cset "name='DMIC Mux' DMIC"
> + cset "name='Int Mic Switch' on"
> + cset "name='Record Path DC Blocking' off"
> + ]
> +}
> diff --git a/src/conf/ucm/ROCKCHIP-I2S/ROCKCHIP-I2S.conf b/src/conf/ucm/ROCKCHIP-I2S/ROCKCHIP-I2S.conf
> new file mode 100644
> index 0000000..0c399b0
> --- /dev/null
> +++ b/src/conf/ucm/ROCKCHIP-I2S/ROCKCHIP-I2S.conf
> @@ -0,0 +1,6 @@
> +Comment "Rockchip card"
> +
> +SectionUseCase."HiFi" {
> + File "HiFi.conf"
> + Comment "Default"
> +}
> --
> 2.1.0
>
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@alsa-project.org
> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
>
prev parent reply other threads:[~2016-05-09 13:00 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-05 6:32 [PATCH alsa-lib] conf/ucm: ROCKCHIP-I2S: add Rockchip I2S UCM config Enric Balletbo i Serra
2016-05-09 13:00 ` Takashi Iwai [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=s5hshxrpesr.wl-tiwai@suse.de \
--to=tiwai@suse.de \
--cc=alsa-devel@alsa-project.org \
--cc=enric.balletbo@collabora.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).