Alsa-Devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Takashi Iwai <tiwai@suse.de>
To: Ronald <ronald645@gmail.com>
Cc: alsa-devel@alsa-project.org,
	David Henningsson <david.henningsson@canonical.com>
Subject: Re: v3.15-rc1: CORB reset timeout#1, CORBRP = 0
Date: Tue, 29 Apr 2014 17:24:12 +0200	[thread overview]
Message-ID: <s5hsiow88gz.wl%tiwai@suse.de> (raw)
In-Reply-To: <CAF1_xX3jYgCp-prVrcfABz=kjH7xhpE+kUikCPJKSBYQrcOu9g@mail.gmail.com>

At Tue, 29 Apr 2014 17:08:25 +0200,
Ronald wrote:
> 
> I take it you want the vendor:device id, but since you have requested
> additional info I have provided some more data. Please let me know if
> I missed anything you require. Thank you.
> 
> Below you will find lspci. I have used the alsa-info.sh script for the
> rest (how convenient!):
> 
> http://www.alsa-project.org/db/?f=daf13e17122d2db2851591b4d79d3ac34fabf864
> 
> 00:10.1 Audio device [0403]: NVIDIA Corporation MCP51 High Definition
> Audio [10de:026c] (rev a2)
>     Subsystem: Hewlett-Packard Company Presario V6133CL [103c:30b7]
>     Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
>     Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>     Latency: 0 (500ns min, 1250ns max)
>     Interrupt: pin B routed to IRQ 21
>     Region 0: Memory at b0000000 (32-bit, non-prefetchable) [size=16K]
>     Capabilities: [44] Power Management version 2
>         Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot+,D3cold+)
>         Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>     Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+
>         Address: 0000000000000000  Data: 0000
>         Masking: 00000000  Pending: 00000000
>     Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+
>     Kernel driver in use: snd_hda_intel

Thanks.  Could you check whether the patch below works?


Takashi

---
diff --git a/sound/pci/hda/hda_controller.c b/sound/pci/hda/hda_controller.c
index 248b90abb882..480bbddbd801 100644
--- a/sound/pci/hda/hda_controller.c
+++ b/sound/pci/hda/hda_controller.c
@@ -1059,24 +1059,26 @@ static void azx_init_cmd_io(struct azx *chip)
 
 	/* reset the corb hw read pointer */
 	azx_writew(chip, CORBRP, ICH6_CORBRP_RST);
-	for (timeout = 1000; timeout > 0; timeout--) {
-		if ((azx_readw(chip, CORBRP) & ICH6_CORBRP_RST) == ICH6_CORBRP_RST)
-			break;
-		udelay(1);
-	}
-	if (timeout <= 0)
-		dev_err(chip->card->dev, "CORB reset timeout#1, CORBRP = %d\n",
-			azx_readw(chip, CORBRP));
+	if (!(chip->driver_caps & AZX_DCAPS_CORBRP_SELF_CLEAR)) {
+		for (timeout = 1000; timeout > 0; timeout--) {
+			if ((azx_readw(chip, CORBRP) & ICH6_CORBRP_RST) == ICH6_CORBRP_RST)
+				break;
+			udelay(1);
+		}
+		if (timeout <= 0)
+			dev_err(chip->card->dev, "CORB reset timeout#1, CORBRP = %d\n",
+				azx_readw(chip, CORBRP));
 
-	azx_writew(chip, CORBRP, 0);
-	for (timeout = 1000; timeout > 0; timeout--) {
-		if (azx_readw(chip, CORBRP) == 0)
-			break;
-		udelay(1);
+		azx_writew(chip, CORBRP, 0);
+		for (timeout = 1000; timeout > 0; timeout--) {
+			if (azx_readw(chip, CORBRP) == 0)
+				break;
+			udelay(1);
+		}
+		if (timeout <= 0)
+			dev_err(chip->card->dev, "CORB reset timeout#2, CORBRP = %d\n",
+				azx_readw(chip, CORBRP));
 	}
-	if (timeout <= 0)
-		dev_err(chip->card->dev, "CORB reset timeout#2, CORBRP = %d\n",
-			azx_readw(chip, CORBRP));
 
 	/* enable corb dma */
 	azx_writeb(chip, CORBCTL, ICH6_CORBCTL_RUN);
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index d6bca62ef387..b540ad71eb0d 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -249,7 +249,8 @@ enum {
 /* quirks for Nvidia */
 #define AZX_DCAPS_PRESET_NVIDIA \
 	(AZX_DCAPS_NVIDIA_SNOOP | AZX_DCAPS_RIRB_DELAY | AZX_DCAPS_NO_MSI |\
-	 AZX_DCAPS_ALIGN_BUFSIZE | AZX_DCAPS_NO_64BIT)
+	 AZX_DCAPS_ALIGN_BUFSIZE | AZX_DCAPS_NO_64BIT |\
+	 AZX_DCAPS_CORBRP_SELF_CLEAR)
 
 #define AZX_DCAPS_PRESET_CTHDA \
 	(AZX_DCAPS_NO_MSI | AZX_DCAPS_POSFIX_LPIB | AZX_DCAPS_4K_BDLE_BOUNDARY)
diff --git a/sound/pci/hda/hda_priv.h b/sound/pci/hda/hda_priv.h
index ba38b819f984..4a7cb01fa912 100644
--- a/sound/pci/hda/hda_priv.h
+++ b/sound/pci/hda/hda_priv.h
@@ -189,6 +189,7 @@ enum { SDI0, SDI1, SDI2, SDI3, SDO0, SDO1, SDO2, SDO3 };
 #define AZX_DCAPS_COUNT_LPIB_DELAY  (1 << 25)	/* Take LPIB as delay */
 #define AZX_DCAPS_PM_RUNTIME	(1 << 26)	/* runtime PM support */
 #define AZX_DCAPS_I915_POWERWELL (1 << 27)	/* HSW i915 powerwell support */
+#define AZX_DCAPS_CORBRP_SELF_CLEAR (1 << 28)	/* CORBRP clears itself after reset */
 
 /* position fix mode */
 enum {

  reply	other threads:[~2014-04-29 15:24 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-04-16  8:30 v3.15-rc1: CORB reset timeout#1, CORBRP = 0 Ronald
2014-04-28 15:34 ` Takashi Iwai
2014-04-29 15:08   ` Ronald
2014-04-29 15:24     ` Takashi Iwai [this message]
2014-04-29 16:31       ` Ronald
2014-04-29 16:42         ` Takashi Iwai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=s5hsiow88gz.wl%tiwai@suse.de \
    --to=tiwai@suse.de \
    --cc=alsa-devel@alsa-project.org \
    --cc=david.henningsson@canonical.com \
    --cc=ronald645@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox