From mboxrd@z Thu Jan 1 00:00:00 1970 From: Takashi Iwai Subject: Re: Acer Aspire 8920g / snd-hda-intel / ALC889 Date: Tue, 13 May 2008 15:51:17 +0200 Message-ID: References: <480C8260.70501@warmcat.com> <480CDC26.3010506@warmcat.com> <480DC787.9070208@warmcat.com> <480DCBC6.3050203@warmcat.com> <480FA5D5.9090208@warmcat.com> <481F84FA.4060307@warmcat.com> <48203A6B.7020408@warmcat.com> Mime-Version: 1.0 (generated by SEMI 1.14.6 - "Maruoka") Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from mx2.suse.de (ns2.suse.de [195.135.220.15]) by alsa0.perex.cz (Postfix) with ESMTP id 1034024B00 for ; Tue, 13 May 2008 15:51:18 +0200 (CEST) In-Reply-To: <48203A6B.7020408@warmcat.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: alsa-devel-bounces@alsa-project.org Errors-To: alsa-devel-bounces@alsa-project.org To: Andy Green Cc: alsa-devel@alsa-project.org List-Id: alsa-devel@alsa-project.org At Tue, 06 May 2008 12:00:59 +0100, Andy Green wrote: > > Somebody in the thread at some point said: > > Hi - > > > Is this above with model=acer-aspire *and* your additional verb? > > Or, is it without model option? > > I tried it with model=acer (same as no forcing) and acer-aspire, I was > able to play 2-channel PCM sounds OK only with the extra verb either > way. I got more controls in alsamixer with just "acer" (like low > frequency channel), but they didn't seem to do anything useful. > > > I found that one initialization is missing for auto-configuration mode > > of ALC889. Please try the patch below and remove model=xxx option. > > OK I will test this patch later today with no model forcing. Did you get any positive/negative result? thanks, Takashi