Re: [PATCH 6/6] ALSA: hda - clean up CX20549 test mixer setup

[Takashi Iwai <tiwai@suse.de>]

At Tue, 10 Apr 2012 08:54:19 +0200,
David Henningsson wrote:
> 
> On 04/06/2012 03:34 PM, Michael Karcher wrote:
> > name pins consistently (MIC1/LINE1/HP-OUT/CD) on all controls
> > affecting those pins.
> 
> If this is a test mixer only, so maybe it does not matter that much, but 
> anyway:
> 
> Loopback controls are usually labeled
> 
> "Line Playback Volume"
> "Mic Playback Volume"
> 
> And outputs:
> 
> "Headphone Playback Volume"
> 
> For line outputs, I'm not sure if the right thing is
> 
> "Front Playback Volume",
> "Line-Out Playback Volume", or
> "Line Out Playback Volume"

Yeah, in general, the strings like these would be better.
But it's a test-only mode, which should be turned on by the user at
own risk, so I didn't want to be too picky.


> > remove duplicate SET_AMP_GAIN_MUTE to 0x17/index 0 and 0x17/index 1
> >
> > really select MIC1, not Mixer out for recording
> >
> > "Mixer out" for recording is not a "pin", adjust comment
> >
> > Signed-off-by: Michael Karcher<kernel@mkarcher.dialup.fu-berlin.de>
> > ---
> >   sound/pci/hda/patch_conexant.c |   38 +++++++++++++++++---------------------
> >   1 files changed, 17 insertions(+), 21 deletions(-)
> >
> > diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c
> > index 8fe9f9d..a36488d 100644
> > --- a/sound/pci/hda/patch_conexant.c
> > +++ b/sound/pci/hda/patch_conexant.c
> > @@ -930,10 +930,10 @@ static const struct snd_kcontrol_new cxt5045_test_mixer[] = {
> >   	/* Output controls */
> >   	HDA_CODEC_VOLUME("Speaker Playback Volume", 0x10, 0x0, HDA_OUTPUT),
> >   	HDA_CODEC_MUTE("Speaker Playback Switch", 0x10, 0x0, HDA_OUTPUT),
> > -	HDA_CODEC_VOLUME("Node 11 Playback Volume", 0x11, 0x0, HDA_OUTPUT),
> > -	HDA_CODEC_MUTE("Node 11 Playback Switch", 0x11, 0x0, HDA_OUTPUT),
> > -	HDA_CODEC_VOLUME("Node 12 Playback Volume", 0x12, 0x0, HDA_OUTPUT),
> > -	HDA_CODEC_MUTE("Node 12 Playback Switch", 0x12, 0x0, HDA_OUTPUT),
> > +	HDA_CODEC_VOLUME("HP-OUT Playback Volume", 0x11, 0x0, HDA_OUTPUT),
> > +	HDA_CODEC_MUTE("HP-OUT Playback Switch", 0x11, 0x0, HDA_OUTPUT),
> > +	HDA_CODEC_VOLUME("LINE1 Playback Volume", 0x12, 0x0, HDA_OUTPUT),
> > +	HDA_CODEC_MUTE("LINE1 Playback Switch", 0x12, 0x0, HDA_OUTPUT),
> >   	
> >   	/* Modes for retasking pin widgets */
> >   	CXT_PIN_MODE("HP-OUT pin mode", 0x11, CXT_PIN_DIR_INOUT),
> > @@ -944,16 +944,16 @@ static const struct snd_kcontrol_new cxt5045_test_mixer[] = {
> >
> >   	/* Loopback mixer controls */
> >
> > -	HDA_CODEC_VOLUME("Mixer-1 Volume", 0x17, 0x0, HDA_INPUT),
> > -	HDA_CODEC_MUTE("Mixer-1 Switch", 0x17, 0x0, HDA_INPUT),
> > -	HDA_CODEC_VOLUME("Mixer-2 Volume", 0x17, 0x1, HDA_INPUT),
> > -	HDA_CODEC_MUTE("Mixer-2 Switch", 0x17, 0x1, HDA_INPUT),
> > -	HDA_CODEC_VOLUME("Mixer-3 Volume", 0x17, 0x2, HDA_INPUT),
> > -	HDA_CODEC_MUTE("Mixer-3 Switch", 0x17, 0x2, HDA_INPUT),
> > -	HDA_CODEC_VOLUME("Mixer-4 Volume", 0x17, 0x3, HDA_INPUT),
> > -	HDA_CODEC_MUTE("Mixer-4 Switch", 0x17, 0x3, HDA_INPUT),
> > -	HDA_CODEC_VOLUME("Mixer-5 Volume", 0x17, 0x4, HDA_INPUT),
> > -	HDA_CODEC_MUTE("Mixer-5 Switch", 0x17, 0x4, HDA_INPUT),
> > +	HDA_CODEC_VOLUME("PCM Volume", 0x17, 0x0, HDA_INPUT),
> > +	HDA_CODEC_MUTE("PCM Switch", 0x17, 0x0, HDA_INPUT),
> > +	HDA_CODEC_VOLUME("MIC1 pin Volume", 0x17, 0x1, HDA_INPUT),
> > +	HDA_CODEC_MUTE("MIC1 pin Switch", 0x17, 0x1, HDA_INPUT),
> > +	HDA_CODEC_VOLUME("LINE1 pin Volume", 0x17, 0x2, HDA_INPUT),
> > +	HDA_CODEC_MUTE("LINE1 pin Switch", 0x17, 0x2, HDA_INPUT),
> > +	HDA_CODEC_VOLUME("HP-OUT pin Volume", 0x17, 0x3, HDA_INPUT),
> > +	HDA_CODEC_MUTE("HP-OUT pin Switch", 0x17, 0x3, HDA_INPUT),
> 
> Eh, is there a loopback control from the headphone?

The HP pin can be used as an input on many codecs indeed.


Takashi

> > +	HDA_CODEC_VOLUME("CD pin Volume", 0x17, 0x4, HDA_INPUT),
> > +	HDA_CODEC_MUTE("CD pin Switch", 0x17, 0x4, HDA_INPUT),
> >   	{
> >   		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
> >   		.name = "Input Source",
> > @@ -985,10 +985,6 @@ static const struct hda_verb cxt5045_test_init_verbs[] = {
> >   	{0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
> >   	{0x18, AC_VERB_SET_DIGI_CONVERT_1, 0},
> >
> > -	/* Start with output sum widgets muted and their output gains at min */
> > -	{0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
> > -	{0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
> > -
> >   	/* Unmute retasking pin widget output buffers since the default
> >   	 * state appears to be output.  As the pin mode is changed by the
> >   	 * user the pin mode control will take care of enabling the pin's
> > @@ -1003,11 +999,11 @@ static const struct hda_verb cxt5045_test_init_verbs[] = {
> >   	/* Set ADC connection select to match default mixer setting (mic1
> >   	 * pin)
> >   	 */
> > -	{0x1a, AC_VERB_SET_CONNECT_SEL, 0x00},
> > -	{0x17, AC_VERB_SET_CONNECT_SEL, 0x00},
> > +	{0x1a, AC_VERB_SET_CONNECT_SEL, 0x01},
> > +	{0x17, AC_VERB_SET_CONNECT_SEL, 0x01},
> >
> >   	/* Mute all inputs to mixer widget (even unconnected ones) */
> > -	{0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* Mixer pin */
> > +	{0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* Mixer */
> >   	{0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, /* Mic1 pin */
> >   	{0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, /* Line pin */
> >   	{0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, /* HP pin */
> 
> 
> 
> -- 
> David Henningsson, Canonical Ltd.
> http://launchpad.net/~diwic
>