Alsa-Devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Takashi Iwai <tiwai@suse.de>
To: Dan Aloni <da-x@colinux.org>
Cc: Clemens Ladisch <clemens@ladisch.de>, alsa-devel@lists.sourceforge.net
Subject: Re: Re: ALC658 rev 0 - a problem with Rear Right
Date: Mon, 07 Mar 2005 18:13:44 +0100	[thread overview]
Message-ID: <s5hvf83v0on.wl@alsa2.suse.de> (raw)
In-Reply-To: <20050307165653.GA22454@localdomain>

At Mon, 7 Mar 2005 18:57:02 +0200,
Dan Aloni wrote:
> 
> On Mon, Mar 07, 2005 at 05:33:56PM +0100, Takashi Iwai wrote:
> > At Mon, 7 Mar 2005 17:39:21 +0200,
> > Dan Aloni wrote:
> > > 
> > > On Mon, Mar 07, 2005 at 02:10:14PM +0100, Clemens Ladisch wrote:
> > > > Dan Aloni wrote:
> > > > > The problem was introduced in the following changeset, which
> > > > > was supposed to cleanup things but accidently broke something.
> > > > >
> > > > > "[ALSA] Clean up and fix stereo mutes" :
> > > > 
> > > > Most AC'97 codecs have one mute bit for both channels, but some can
> > > > have one for each channel (that's called "stereo mute").
> > > > 
> > > > It seems the new driver enables the stereo mute bits, but then forgets
> > > > to unmute the second channel.
> > > > 
> > > > Does anything happen if you toggle both mute bits in alsamixer?
> > > 
> > > Using alsamixer I am unable to mute any channel by itself - it 
> > > always mutes or unmutes boths channels at the same time (I tried
> > > any possible combination of m M, < or >). However if I revert the
> > > changeset I am able to control each channel alone using < or > and
> > > there's no problem.
> > 
> > Hmm, are you sure that it's ALC658?  AFAIK, the codec doesn't  support
> > the stereo mutes (at least ALSA code doesn't enable it).
> 
> Unless the driver misidentifies the chipset, this is ALC658.

Oh yes, indeed.  It's strange that the older version did have the
stereo mute controls.

Could you compare the contents of
/proc/asound/card0/codec97#0/ac97#0-0+regs file between the older
("working") and the latest versions?

If any difference is found, try to change the value by writing via
proc interface, e.g.

	echo 02 8080 > /proc/asound/card0/codec97#0/ac97#0-0+regs

(this feature is enabled only when you compile with CONFIG_SND_DEBUG)


thanks,

Takashi


-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click

  reply	other threads:[~2005-03-07 17:13 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2005-03-05 15:35 ALC658 rev 0 - a problem with Rear Right Dan Aloni
2005-03-07 10:42 ` Dan Aloni
2005-03-07 12:28   ` Dan Aloni
2005-03-07 13:10     ` Clemens Ladisch
2005-03-07 15:39       ` Dan Aloni
2005-03-07 16:33         ` Takashi Iwai
2005-03-07 16:57           ` Dan Aloni
2005-03-07 17:13             ` Takashi Iwai [this message]
2005-03-07 18:24               ` Dan Aloni
2005-03-07 18:28                 ` Takashi Iwai
2005-03-07 18:55                   ` Dan Aloni
2005-03-07 19:13                     ` Takashi Iwai
2005-03-07 20:21                       ` Dan Aloni

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=s5hvf83v0on.wl@alsa2.suse.de \
    --to=tiwai@suse.de \
    --cc=alsa-devel@lists.sourceforge.net \
    --cc=clemens@ladisch.de \
    --cc=da-x@colinux.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox