From: Takashi Iwai <tiwai@suse.de>
To: Stephen Warren <SWarren@nvidia.com>
Cc: alsa-devel@lists.sourceforge.net
Subject: Re: azx: New board, can't get rear IO connectors to work.
Date: Fri, 17 Dec 2004 16:06:26 +0100 [thread overview]
Message-ID: <s5hvfb1vua5.wl@alsa2.suse.de> (raw)
In-Reply-To: <s5hy8fxvuxy.wl@alsa2.suse.de>
[-- Attachment #1: Type: text/plain, Size: 416 bytes --]
At Fri, 17 Dec 2004 15:52:09 +0100,
I wrote:
>
> I tested the test board here (which has 3-stack + front-panel) and
> found that the surround doesn't work here, too.
> It's because the wrong initialization sequence when switched to the
> 6-channel mode. After fixing it, the surround seems working well with
> 6-ch mode. The patch is below (already committed to CVS).
More patch to correct comments...
Takashi
[-- Attachment #2: Type: text/plain, Size: 2753 bytes --]
Index: alsa-driver/pci/azx/patch_realtek.c
===================================================================
RCS file: /suse/tiwai/cvs/alsa/alsa-driver/pci/azx/patch_realtek.c,v
retrieving revision 1.6
retrieving revision 1.7
diff -u -r1.6 -r1.7
--- alsa-driver/pci/azx/patch_realtek.c 17 Dec 2004 14:50:34 -0000 1.6
+++ alsa-driver/pci/azx/patch_realtek.c 17 Dec 2004 15:03:28 -0000 1.7
@@ -439,13 +439,13 @@
*/
static struct hda_verb alc880_init_verbs_three_stack[] = {
- /* Line In pin widget(nid=0x1a) for input */
+ /* Line In pin widget for input */
{0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
- /* CD pin widget(nid=0x1C) for input */
+ /* CD pin widget for input */
{0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
- /* Mic1 (rear panel) pin widget(nid=0x18) for input and vref at 80% */
+ /* Mic1 (rear panel) pin widget for input and vref at 80% */
{0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24},
- /* Mic2 (front panel) pin widget(nid=0x1B) for input and vref at 80% */
+ /* Mic2 (front panel) pin widget for input and vref at 80% */
{0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24},
/* unmute amp left and right */
{0x07, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000},
@@ -514,13 +514,13 @@
};
static struct hda_verb alc880_init_verbs_five_stack[] = {
- /* Line In pin widget(nid=0x14) for input */
+ /* Line In pin widget for input */
{0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
- /* CD pin widget(nid=0x1C) for input */
+ /* CD pin widget for input */
{0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
- /* Mic1 (rear panel) pin widget(nid=0x18) for input and vref at 80% */
+ /* Mic1 (rear panel) pin widget for input and vref at 80% */
{0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24},
- /* Mic2 (front panel) pin widget(nid=0x1B) for input and vref at 80% */
+ /* Mic2 (front panel) pin widget for input and vref at 80% */
{0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24},
/* unmute amp left and right */
{0x07, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000},
@@ -1078,13 +1078,13 @@
};
static struct hda_verb alc260_init_verbs[] = {
- /* Line In pin widget(nid=0x14) for input */
+ /* Line In pin widget for input */
{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
- /* CD pin widget(nid=0x1C) for input */
+ /* CD pin widget for input */
{0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
- /* Mic1 (rear panel) pin widget(nid=0x18) for input and vref at 80% */
+ /* Mic1 (rear panel) pin widget for input and vref at 80% */
{0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24},
- /* Mic2 (front panel) pin widget(nid=0x1B) for input and vref at 80% */
+ /* Mic2 (front panel) pin widget for input and vref at 80% */
{0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24},
/* unmute amp left and right */
{0x04, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000},
next prev parent reply other threads:[~2004-12-17 15:06 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-12-16 21:17 azx: New board, can't get rear IO connectors to work Stephen Warren
2004-12-17 14:52 ` Takashi Iwai
2004-12-17 15:06 ` Takashi Iwai [this message]
-- strict thread matches above, loose matches on Subject: below --
2004-12-17 16:39 Stephen Warren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=s5hvfb1vua5.wl@alsa2.suse.de \
--to=tiwai@suse.de \
--cc=SWarren@nvidia.com \
--cc=alsa-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox