From: Takashi Iwai <tiwai@suse.de>
To: Darren Stevens <darren@stevens-zone.net>
Cc: alsa-devel@alsa-project.org
Subject: Re: [PATCH] ALSA: hda/patch_sigmatel: Add AmigaOne X1000 pin configs
Date: Mon, 23 Jan 2017 15:22:04 +0100 [thread overview]
Message-ID: <s5hwpdlonzn.wl-tiwai@suse.de> (raw)
In-Reply-To: <497610a85f.700084ba@auth.smtp.1and1.co.uk>
On Fri, 20 Jan 2017 18:58:01 +0100,
Darren Stevens wrote:
>
> The AmigaOne X1000 has a Sigmatel STAC92HD700 attached to the HD Audio
> on an ATI SB600. Add the required settings to enable sound.
>
> Signed-off-by: Darren Stevens <darren@stevens-zone.net>
The patch isn't cleanly applicable. Please fix your MUA setup not to
modify the spaces? If it's difficult, use an attachment as a last
resort.
thanks,
Takashi
>
> ---
>
> diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
> index 37b70f8..51947a6 100644
> --- a/sound/pci/hda/patch_sigmatel.c
> +++ b/sound/pci/hda/patch_sigmatel.c
> @@ -166,6 +166,7 @@ enum {
> STAC_D965_VERBS,
> STAC_DELL_3ST,
> STAC_DELL_BIOS,
> + STAC_NEMO_DEFAULT,
> STAC_DELL_BIOS_AMIC,
> STAC_DELL_BIOS_SPDIF,
> STAC_927X_DELL_DMIC,
> @@ -1360,6 +1361,23 @@ static int stac_create_spdif_mux_ctls(struct hda_codec
> *codec)
> {}
> };
>
> +static const struct hda_pintbl nemo_pin_configs[] = {
> + { 0x0a, 0x02214020 },
> + { 0x0b, 0x02A19080 },
> + { 0x0c, 0x0181304E },
> + { 0x0d, 0x01014010 },
> + { 0x0e, 0x01A19040 },
> + { 0x0f, 0x01011012 },
> + { 0x10, 0x01016011 },
> + { 0x11, 0x01012014 },
> + { 0x12, 0x103301F0 },
> + { 0x13, 0x00000000 },
> + { 0x14, 0x00000000 },
> + { 0x21, 0x01442170 },
> + { 0x22, 0x00000000 },
> + { 0x23, 0x00000000 },
> + {}
> +};
>
> static void stac9200_fixup_panasonic(struct hda_codec *codec,
> const struct hda_fixup *fix, int action)
> @@ -3883,6 +3901,10 @@ static void stac927x_fixup_volknob(struct hda_codec
> *codec,
> .type = HDA_FIXUP_PINS,
> .v.pins = d965_5st_no_fp_pin_configs,
> },
> + [STAC_NEMO_DEFAULT] = {
> + .type = HDA_FIXUP_PINS,
> + .v.pins = nemo_pin_configs,
> + },
> [STAC_DELL_3ST] = {
> .type = HDA_FIXUP_PINS,
> .v.pins = dell_3st_pin_configs,
> @@ -3939,6 +3961,7 @@ static void stac927x_fixup_volknob(struct hda_codec
> *codec,
> { .id = STAC_D965_5ST_NO_FP, .name = "5stack-no-fp" },
> { .id = STAC_DELL_3ST, .name = "dell-3stack" },
> { .id = STAC_DELL_BIOS, .name = "dell-bios" },
> + { .id = STAC_NEMO_DEFAULT, .name = "nemo-default" },
> { .id = STAC_DELL_BIOS_AMIC, .name = "dell-bios-amic" },
> { .id = STAC_927X_VOLKNOB, .name = "volknob" },
> {}
> @@ -3977,6 +4000,8 @@ static void stac927x_fixup_volknob(struct hda_codec
> *codec,
> "Intel D965", STAC_D965_5ST),
> SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_INTEL, 0xff00, 0x2500,
> "Intel D965", STAC_D965_5ST),
> + /* Nemo */
> + SND_PCI_QUIRK(0x1888, 0x1000, "AmigaOne X1000", STAC_NEMO_DEFAULT),
> /* volume-knob fixes */
> SND_PCI_QUIRK_VENDOR(0x10cf, "FSC", STAC_927X_VOLKNOB),
> {} /* terminator */
> @@ -5036,6 +5061,7 @@ static int patch_stac9872(struct hda_codec *codec)
> HDA_CODEC_ENTRY(0x83847683, "STAC9221D A2", patch_stac922x),
> HDA_CODEC_ENTRY(0x83847618, "STAC9227", patch_stac927x),
> HDA_CODEC_ENTRY(0x83847619, "STAC9227", patch_stac927x),
> + HDA_CODEC_ENTRY(0x83847638, "STAC92HD700", patch_stac927x),
> HDA_CODEC_ENTRY(0x83847616, "STAC9228", patch_stac927x),
> HDA_CODEC_ENTRY(0x83847617, "STAC9228", patch_stac927x),
> HDA_CODEC_ENTRY(0x83847614, "STAC9229", patch_stac927x),
>
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@alsa-project.org
> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
>
next prev parent reply other threads:[~2017-01-23 14:22 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-20 17:58 [PATCH] ALSA: hda/patch_sigmatel: Add AmigaOne X1000 pin configs Darren Stevens
2017-01-23 14:22 ` Takashi Iwai [this message]
-- strict thread matches above, loose matches on Subject: below --
2017-01-23 19:43 Darren Stevens
2017-01-24 9:02 ` Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=s5hwpdlonzn.wl-tiwai@suse.de \
--to=tiwai@suse.de \
--cc=alsa-devel@alsa-project.org \
--cc=darren@stevens-zone.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox