From: Takashi Iwai <tiwai@suse.de>
To: Ondrej Zary <linux@rainbow-software.org>
Cc: alsa-devel@alsa-project.org
Subject: Re: [PATCH 1/2] snd-ice1712: add suspend support for ICE1712 chip
Date: Mon, 31 Mar 2014 12:32:06 +0200 [thread overview]
Message-ID: <s5hwqfa1wwp.wl%tiwai@suse.de> (raw)
In-Reply-To: <1396215451-24128-1-git-send-email-linux@rainbow-software.org>
At Sun, 30 Mar 2014 23:37:30 +0200,
Ondrej Zary wrote:
>
> Add suspend/resume support for ICE1712 chip.
> Card-specific subdrivers need to enable it and provide callbacks that suspend/resume the codecs.
>
> Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Thanks, applied both patches.
Takashi
> ---
> sound/pci/ice1712/ice1712.c | 85 +++++++++++++++++++++++++++++++++++++++----
> 1 file changed, 77 insertions(+), 8 deletions(-)
>
> diff --git a/sound/pci/ice1712/ice1712.c b/sound/pci/ice1712/ice1712.c
> index 28ec872..dbb0f96 100644
> --- a/sound/pci/ice1712/ice1712.c
> +++ b/sound/pci/ice1712/ice1712.c
> @@ -2428,6 +2428,13 @@ static int snd_ice1712_chip_init(struct snd_ice1712 *ice)
> snd_ice1712_write(ice, ICE1712_IREG_CONSUMER_POWERDOWN, 0);
> }
> snd_ice1712_set_pro_rate(ice, 48000, 1);
> + /* unmask used interrupts */
> + outb(((ice->eeprom.data[ICE_EEP1_CODEC] & ICE1712_CFG_2xMPU401) == 0 ?
> + ICE1712_IRQ_MPU2 : 0) |
> + ((ice->eeprom.data[ICE_EEP1_CODEC] & ICE1712_CFG_NO_CON_AC97) ?
> + ICE1712_IRQ_PBKDS | ICE1712_IRQ_CONCAP | ICE1712_IRQ_CONPBK : 0),
> + ICEREG(ice, IRQMASK));
> + outb(0x00, ICEMT(ice, IRQ));
>
> return 0;
> }
> @@ -2589,6 +2596,7 @@ static int snd_ice1712_create(struct snd_card *card,
> ice->pci = pci;
> ice->irq = -1;
> pci_set_master(pci);
> + /* disable legacy emulation */
> pci_write_config_word(ice->pci, 0x40, 0x807f);
> pci_write_config_word(ice->pci, 0x42, 0x0006);
> snd_ice1712_proc_init(ice);
> @@ -2625,14 +2633,6 @@ static int snd_ice1712_create(struct snd_card *card,
> return -EIO;
> }
>
> - /* unmask used interrupts */
> - outb(((ice->eeprom.data[ICE_EEP1_CODEC] & ICE1712_CFG_2xMPU401) == 0 ?
> - ICE1712_IRQ_MPU2 : 0) |
> - ((ice->eeprom.data[ICE_EEP1_CODEC] & ICE1712_CFG_NO_CON_AC97) ?
> - ICE1712_IRQ_PBKDS | ICE1712_IRQ_CONCAP | ICE1712_IRQ_CONPBK : 0),
> - ICEREG(ice, IRQMASK));
> - outb(0x00, ICEMT(ice, IRQ));
> -
> err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, ice, &ops);
> if (err < 0) {
> snd_ice1712_free(ice);
> @@ -2809,11 +2809,80 @@ static void snd_ice1712_remove(struct pci_dev *pci)
> snd_card_free(card);
> }
>
> +#ifdef CONFIG_PM_SLEEP
> +static int snd_ice1712_suspend(struct device *dev)
> +{
> + struct pci_dev *pci = to_pci_dev(dev);
> + struct snd_card *card = dev_get_drvdata(dev);
> + struct snd_ice1712 *ice = card->private_data;
> +
> + if (!ice->pm_suspend_enabled)
> + return 0;
> +
> + snd_power_change_state(card, SNDRV_CTL_POWER_D3hot);
> +
> + snd_pcm_suspend_all(ice->pcm);
> + snd_pcm_suspend_all(ice->pcm_pro);
> + snd_pcm_suspend_all(ice->pcm_ds);
> + snd_ac97_suspend(ice->ac97);
> +
> + if (ice->pm_suspend)
> + ice->pm_suspend(ice);
> +
> + pci_disable_device(pci);
> + pci_save_state(pci);
> + pci_set_power_state(pci, PCI_D3hot);
> + return 0;
> +}
> +
> +static int snd_ice1712_resume(struct device *dev)
> +{
> + struct pci_dev *pci = to_pci_dev(dev);
> + struct snd_card *card = dev_get_drvdata(dev);
> + struct snd_ice1712 *ice = card->private_data;
> +
> + if (!ice->pm_suspend_enabled)
> + return 0;
> +
> + pci_set_power_state(pci, PCI_D0);
> + pci_restore_state(pci);
> +
> + if (pci_enable_device(pci) < 0) {
> + snd_card_disconnect(card);
> + return -EIO;
> + }
> +
> + pci_set_master(pci);
> +
> + if (snd_ice1712_chip_init(ice) < 0) {
> + snd_card_disconnect(card);
> + return -EIO;
> + }
> +
> + if (ice->pm_resume)
> + ice->pm_resume(ice);
> +
> + if (ice->ac97)
> + snd_ac97_resume(ice->ac97);
> +
> + snd_power_change_state(card, SNDRV_CTL_POWER_D0);
> + return 0;
> +}
> +
> +static SIMPLE_DEV_PM_OPS(snd_ice1712_pm, snd_ice1712_suspend, snd_ice1712_resume);
> +#define SND_VT1712_PM_OPS &snd_ice1712_pm
> +#else
> +#define SND_VT1712_PM_OPS NULL
> +#endif /* CONFIG_PM_SLEEP */
> +
> static struct pci_driver ice1712_driver = {
> .name = KBUILD_MODNAME,
> .id_table = snd_ice1712_ids,
> .probe = snd_ice1712_probe,
> .remove = snd_ice1712_remove,
> + .driver = {
> + .pm = SND_VT1712_PM_OPS,
> + },
> };
>
> module_pci_driver(ice1712_driver);
> --
> Ondrej Zary
>
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@alsa-project.org
> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
>
prev parent reply other threads:[~2014-03-31 10:32 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-30 21:37 [PATCH 1/2] snd-ice1712: add suspend support for ICE1712 chip Ondrej Zary
2014-03-30 21:37 ` [PATCH 2/2] snd-ice1712: Add suspend support for M-Audio ICE1712-based cards Ondrej Zary
2014-03-31 10:32 ` Takashi Iwai [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=s5hwqfa1wwp.wl%tiwai@suse.de \
--to=tiwai@suse.de \
--cc=alsa-devel@alsa-project.org \
--cc=linux@rainbow-software.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox