From: Takashi Iwai <tiwai@suse.de>
To: Yedidyah Bar-David <didi@tau.ac.il>
Cc: alsa-devel@alsa-project.org
Subject: Re: via82xx on CLE266
Date: Thu, 14 Apr 2005 15:16:24 +0200 [thread overview]
Message-ID: <s5hwtr5ebx3.wl@alsa2.suse.de> (raw)
In-Reply-To: <20050413185711.GA4587@nova.cs.tau.ac.il>
At Wed, 13 Apr 2005 21:57:11 +0300,
Yedidyah Bar-David wrote:
>
> Hi all,
>
> I recently bought a Matsonic MSCLE266-f board, based on VIA CLE266.
> When insmoding, I got a message asking to report if dxs_support
> works. So I do. If that's not the right address, sorry.
>
> lspci:
> 0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc.
> VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
>
> lspci -nvv:
> -----------------------------------------------------------------------
> 0000:00:11.5 0401: 1106:3059 (rev 50)
> Subsystem: 1019:a101
> Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Interrupt: pin C routed to IRQ 5
> Region 0: I/O ports at e000 [size=256]
> Capabilities: [c0] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> -----------------------------------------------------------------------
>
> dxs_support=4 does work. That is, it allows to record/play in freqs
> other than 48k.
Thanks for the report.
Could you try ALSA CVS version and dxs_support=5?
This will allow you more sample rates for each stream.
> I might add that it took me quite a lot of time to figure out that
> the driver works (with or without dxs_support), mainly because the
> mixer settings were very unintuitive (at least for me) - to hear
> sound, I had to turn off "IEC958 Capture Monitor". The "master"
> does not affect anything I could see. Maybe the real master is
> confused to be "IEC958 Capture Monitor"?
I guess you have a C-Media ac97 codec. It has no hardware master
volume control indeed.
"IEC958 Capture Monitor" should be off as default. I don't know what
turned it on.
Takashi
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
prev parent reply other threads:[~2005-04-14 13:16 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-04-13 18:57 via82xx on CLE266 Yedidyah Bar-David
2005-04-14 13:16 ` Takashi Iwai [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=s5hwtr5ebx3.wl@alsa2.suse.de \
--to=tiwai@suse.de \
--cc=alsa-devel@alsa-project.org \
--cc=didi@tau.ac.il \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox