Re: [PATCH] Adds 24bit, 96khz support for multichannel playback on the Audigy 2 sound cards.

[Takashi Iwai <tiwai@suse.de>]

At Sun, 13 Mar 2005 21:43:26 +0000,
James Courtier-Dutton wrote:
> 
> Dmitry Baryshkov wrote:
> > Hello,
> > On Sat, Mar 12, 2005 at 07:57:25PM +0000, James Courtier-Dutton wrote:
> > 
> >>Please see readme.txt at 
> >>http://www.alsa-project.org/~james/alsa-driver/p16v/
> >>http://www.alsa-project.org/~james/alsa-driver/p16v/readme.txt
> >>
> > 
> > 
> > Thank you for your work.
> > 
> > I have plain Audigy2 6.1 (SB0240) and I tried using alsa-driver-1.0.9rc1.
> > speaker-test command from your readme worked more or less. When it worked,
> > channels were swapped. speaker-test tried to shout from Rear Left, but I
> > got sound from Center, Rear Right - LFE, Unk Left - Rear Left,
> > Unk Right - Rear Right (I had to patch speaker-test a bit, so it doesn't
> > segfault). I can't verify what channel sends sound to the "Back",
> > because I have no 4-pin minijack.
> > 
> > BTW1: this incorrect "naming" maybe a more generic problem, because if I
> > try to use multichannel device (plughw:0,3), i get same mis"naming".
> > 
> > BTW2: I wander when will ALSA support 6.1 configurations/cards correctly?
> > 
> > Also at some point p16v hanged, every program trying to use plughw:0,4
> > hangs at first poll(). modprobe -r snd-emu10k1 ; modprobe snd-emu10k1
> > cycle doesn't help. Later I'll try rebooting to see if it's permanent
> > damage or not.
> > 
> 
> Please upgrade your speaker-test version to the latest in alsa-utils.
> Failing that, there is a newer version at 
> http://www.alsa-project.org/~james/speaker-test/

FYI, 1.0.9rc1 already includes the latest one (0.0.7).


Takashi


-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click