From: Takashi Iwai <tiwai@suse.de>
To: Alex Romosan <romosan@sycorax.lbl.gov>
Cc: Lee Revell <rlrevell@joe-job.com>,
alsa-devel <alsa-devel@lists.sourceforge.net>
Subject: Re: Re: AC97 related build problem with CVS
Date: Mon, 29 Nov 2004 12:38:36 +0100 [thread overview]
Message-ID: <s5hy8gkq403.wl@alsa2.suse.de> (raw)
In-Reply-To: <87is7pcejx.fsf@sycorax.lbl.gov>
[-- Attachment #1: Type: text/plain, Size: 1122 bytes --]
At Sun, 28 Nov 2004 23:14:26 -0800,
Alex Romosan wrote:
>
> Takashi Iwai <tiwai@suse.de> writes:
>
> > At Sat, 20 Nov 2004 01:45:19 -0500,
> > Lee Revell wrote:
> >>
> >> This must be related to the AC97 changes committed recently. CVS from
> >> yesterday works, but today I get:
> >>
> >> make[1]: Entering directory
> >> `/home/rlrevell/kernel-source/linux-2.6.9-rc3-mm3-T3'
> >> Building modules, stage 2.
> >> MODPOST
> >> *** Warning:
> >> "snd_ac97_restore_iec958" [/home/rlrevell/cvs/alsa/alsa-driver/pci/ac97/snd-ac97-codec.ko] undefined!
> >> *** Warning:
> >> "snd_ac97_restore_status" [/home/rlrevell/cvs/alsa/alsa-driver/pci/ac97/snd-ac97-codec.ko] undefined!
> >
> > Fine on my system. I don't think I missed the cvs commit....
> > Could you verify again? Did you get the compile warning during
> > compilation of ac97_codec.c and ac97_patch.c?
>
> snd_ac97_restore_iec958 and snd_ac97_restore_status are defined only
> if the kernel is configured with CONFIG_PM defined. there are some
> missing #ifdef CONFIG_PM in ac97_patch.c.
Ah ok, now fixed on CVS. The patch is attached below.
Takashi
[-- Attachment #2: Type: text/plain, Size: 3001 bytes --]
Index: alsa-kernel/include/ac97_codec.h
===================================================================
RCS file: /suse/tiwai/cvs/alsa/alsa-kernel/include/ac97_codec.h,v
retrieving revision 1.55
retrieving revision 1.56
diff -u -r1.55 -r1.56
--- alsa-kernel/include/ac97_codec.h 19 Nov 2004 13:44:27 -0000 1.55
+++ alsa-kernel/include/ac97_codec.h 29 Nov 2004 11:34:49 -0000 1.56
@@ -423,7 +423,9 @@
int (*build_specific) (ac97_t *ac97);
int (*build_spdif) (ac97_t *ac97);
int (*build_post_spdif) (ac97_t *ac97);
+#ifdef CONFIG_PM
void (*resume) (ac97_t *ac97);
+#endif
};
struct _snd_ac97_bus_ops {
Index: alsa-kernel/pci/ac97/ac97_patch.c
===================================================================
RCS file: /suse/tiwai/cvs/alsa/alsa-kernel/pci/ac97/ac97_patch.c,v
retrieving revision 1.60
retrieving revision 1.61
diff -u -r1.60 -r1.61
--- alsa-kernel/pci/ac97/ac97_patch.c 25 Nov 2004 15:23:16 -0000 1.60
+++ alsa-kernel/pci/ac97/ac97_patch.c 29 Nov 2004 11:34:49 -0000 1.61
@@ -775,6 +775,7 @@
/*
* Analog Device AD18xx, AD19xx codecs
*/
+#ifdef CONFIG_PM
static void ad18xx_resume(ac97_t *ac97)
{
static unsigned short setup_regs[] = {
@@ -837,6 +838,7 @@
snd_ac97_restore_iec958(ac97);
}
+#endif
int patch_ad1819(ac97_t * ac97)
{
@@ -907,7 +909,9 @@
}
static struct snd_ac97_build_ops patch_ad1881_build_ops = {
+#ifdef CONFIG_PM
.resume = &ad18xx_resume
+#endif
};
int patch_ad1881(ac97_t * ac97)
@@ -988,7 +992,9 @@
static struct snd_ac97_build_ops patch_ad1885_build_ops = {
.build_specific = &patch_ad1885_specific,
+#ifdef CONFIG_PM
.resume = &ad18xx_resume
+#endif
};
int patch_ad1885(ac97_t * ac97)
@@ -1096,7 +1102,9 @@
static struct snd_ac97_build_ops patch_ad1981a_build_ops = {
.build_post_spdif = patch_ad198x_post_spdif,
.build_specific = patch_ad1981a_specific,
+#ifdef CONFIG_PM
.resume = ad18xx_resume
+#endif
};
int patch_ad1981a(ac97_t *ac97)
@@ -1125,7 +1133,9 @@
static struct snd_ac97_build_ops patch_ad1981b_build_ops = {
.build_post_spdif = patch_ad198x_post_spdif,
.build_specific = patch_ad1981b_specific,
+#ifdef CONFIG_PM
.resume = ad18xx_resume
+#endif
};
int patch_ad1981b(ac97_t *ac97)
@@ -1241,7 +1251,9 @@
static struct snd_ac97_build_ops patch_ad1888_build_ops = {
.build_post_spdif = patch_ad198x_post_spdif,
.build_specific = patch_ad1888_specific,
+#ifdef CONFIG_PM
.resume = ad18xx_resume
+#endif
};
int patch_ad1888(ac97_t * ac97)
@@ -1276,7 +1288,9 @@
static struct snd_ac97_build_ops patch_ad1980_build_ops = {
.build_post_spdif = patch_ad198x_post_spdif,
.build_specific = patch_ad1980_specific,
+#ifdef CONFIG_PM
.resume = ad18xx_resume
+#endif
};
int patch_ad1980(ac97_t * ac97)
@@ -1303,7 +1317,9 @@
static struct snd_ac97_build_ops patch_ad1985_build_ops = {
.build_post_spdif = patch_ad198x_post_spdif,
.build_specific = patch_ad1985_specific,
+#ifdef CONFIG_PM
.resume = ad18xx_resume
+#endif
};
int patch_ad1985(ac97_t * ac97)
prev parent reply other threads:[~2004-11-29 11:38 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-11-20 6:45 AC97 related build problem with CVS Lee Revell
2004-11-22 13:14 ` Takashi Iwai
2004-11-29 7:14 ` Alex Romosan
2004-11-29 11:38 ` Takashi Iwai [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=s5hy8gkq403.wl@alsa2.suse.de \
--to=tiwai@suse.de \
--cc=alsa-devel@lists.sourceforge.net \
--cc=rlrevell@joe-job.com \
--cc=romosan@sycorax.lbl.gov \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox