Re: Edirol DA-2496

[Takashi Iwai <tiwai@suse.de>]

At Mon, 13 Oct 2003 16:52:13 +0200,
Jonatan de la Torre wrote:
> 
> El lun, 13-10-2003 a las 16:34, Takashi Iwai escribió:
> > At Mon, 13 Oct 2003 16:25:53 +0200,
> > Jonatan de la Torre wrote:
> > > 
> > > Ice1712 has 128 pins,
> > > Which among them should I test?
> > 
> > did you try to add the id as delta 1010LT?
> > 
> > 
> Sorry but I don't know. I edit this file:
> /usr/src/alsa/alsa-driver-0.9.7a/alsa-kernel/pci/ice1712/delta.c

as a test, simply replace ICE1712_SUBDEVICE_DELTA1010LT definition in
delta.h with your id (0xce164010).
then it should appear as if delta 1010LT.


> 
> But what should I do? I can't programm. Please tell me which line to
> search and what tag to replace.
> Thank You.
> At the moment I downloaded datasheets from envy1712, AK4524 and CS8420
> and printed the pin descriptions of each one to follow the tracks on the
> board.

only GPIO pins are used for communication with the codec chips. 
usually there are two or three pins via I2C or SPI mode for clock,
data, and chip-select.


Takashi


-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program.
SourceForge.net hosts over 70,000 Open Source Projects.
See the people who have HELPED US provide better services:
Click here: http://sourceforge.net/supporters.php