AMD-GFX Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Rex Zhu <Rex.Zhu-5C7GfCeVMHo@public.gmane.org>
To: amd-gfx-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
Cc: Rex Zhu <Rex.Zhu-5C7GfCeVMHo@public.gmane.org>
Subject: [PATCH 1/4] drm/amd/powerplay: Configuring DIDT blocks only SQ enabled on Polaris11.
Date: Mon, 9 Jan 2017 14:51:37 +0800	[thread overview]
Message-ID: <1483944700-3842-1-git-send-email-Rex.Zhu@amd.com> (raw)

following firmware's request.

Change-Id: I0098144cae57727999101152e973338ddffec28e
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
---
 drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c | 21 ++++++++++++---------
 1 file changed, 12 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c
index 2f6225e..2ea9c0e 100644
--- a/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c
+++ b/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c
@@ -767,17 +767,10 @@ int phm_get_voltage_evv_on_sclk(struct pp_hwmgr *hwmgr, uint8_t voltage_type,
 
 int polaris_set_asic_special_caps(struct pp_hwmgr *hwmgr)
 {
-	/* power tune caps Assume disabled */
+
 	phm_cap_set(hwmgr->platform_descriptor.platformCaps,
 						PHM_PlatformCaps_SQRamping);
 	phm_cap_set(hwmgr->platform_descriptor.platformCaps,
-						PHM_PlatformCaps_DBRamping);
-	phm_cap_set(hwmgr->platform_descriptor.platformCaps,
-						PHM_PlatformCaps_TDRamping);
-	phm_cap_set(hwmgr->platform_descriptor.platformCaps,
-						PHM_PlatformCaps_TCPRamping);
-
-	phm_cap_set(hwmgr->platform_descriptor.platformCaps,
 						PHM_PlatformCaps_RegulatorHot);
 
 	phm_cap_set(hwmgr->platform_descriptor.platformCaps,
@@ -786,9 +779,19 @@ int polaris_set_asic_special_caps(struct pp_hwmgr *hwmgr)
 	phm_cap_set(hwmgr->platform_descriptor.platformCaps,
 				PHM_PlatformCaps_TablelessHardwareInterface);
 
-	if ((hwmgr->chip_id == CHIP_POLARIS11) || (hwmgr->chip_id == CHIP_POLARIS12))
+
+	if (hwmgr->chip_id != CHIP_POLARIS10)
 		phm_cap_set(hwmgr->platform_descriptor.platformCaps,
 					PHM_PlatformCaps_SPLLShutdownSupport);
+
+	if (hwmgr->chip_id != CHIP_POLARIS11) {
+		phm_cap_set(hwmgr->platform_descriptor.platformCaps,
+							PHM_PlatformCaps_DBRamping);
+		phm_cap_set(hwmgr->platform_descriptor.platformCaps,
+							PHM_PlatformCaps_TDRamping);
+		phm_cap_set(hwmgr->platform_descriptor.platformCaps,
+							PHM_PlatformCaps_TCPRamping);
+	}
 	return 0;
 }
 
-- 
1.9.1

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

             reply	other threads:[~2017-01-09  6:51 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-01-09  6:51 Rex Zhu [this message]
     [not found] ` <1483944700-3842-1-git-send-email-Rex.Zhu-5C7GfCeVMHo@public.gmane.org>
2017-01-09  6:51   ` [PATCH 2/4] drm/amd/powerplay: add new smu message Rex Zhu
     [not found]     ` <1483944700-3842-2-git-send-email-Rex.Zhu-5C7GfCeVMHo@public.gmane.org>
2017-01-09 14:18       ` Deucher, Alexander
2017-01-09  6:51   ` [PATCH 3/4] drm/amd/powerplay: refine DIDT feature in Powerplay Rex Zhu
2017-01-09  6:51   ` [PATCH 4/4] drm/amdgpu: extend profiling mode Rex Zhu
     [not found]     ` <1483944700-3842-4-git-send-email-Rex.Zhu-5C7GfCeVMHo@public.gmane.org>
2017-01-11 22:46       ` Andy Furniss
     [not found]         ` <5876B5C8.1010401-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2017-01-31 23:19           ` Andy Furniss
     [not found]             ` <58911B91.50008-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2017-02-01 14:42               ` Alex Deucher
     [not found]                 ` <CADnq5_N27CHyxLZQMypKUsBGO3tfGcbW3+aO-vQM+=7NShghCQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-02-01 15:36                   ` Andy Furniss
     [not found]                     ` <5892008F.8030008-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2017-02-06 11:56                       ` Zhu, Rex
     [not found]                         ` <CY4PR12MB1687B1342B6DE8004D0B08E7FB400-rpdhrqHFk06Y0SjTqZDccQdYzm3356FpvxpqHgZTriW3zl9H0oFU5g@public.gmane.org>
2017-02-06 12:32                           ` Andy Furniss
     [not found]                             ` <58986CC3.40307-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2017-02-06 14:09                               ` Zhu, Rex
     [not found]                                 ` <CY4PR12MB1687CA7CF3127858CA7C2120FB400-rpdhrqHFk06Y0SjTqZDccQdYzm3356FpvxpqHgZTriW3zl9H0oFU5g@public.gmane.org>
2017-02-07  9:48                                   ` Zhu, Rex
     [not found]                                     ` <CY4PR12MB168710F77DE9F3F5E54A102CFB430-rpdhrqHFk06Y0SjTqZDccQdYzm3356FpvxpqHgZTriW3zl9H0oFU5g@public.gmane.org>
2017-02-07 13:37                                       ` Andy Furniss
2017-02-07 15:24                                       ` Alex Deucher
2017-01-09 14:11   ` [PATCH 1/4] drm/amd/powerplay: Configuring DIDT blocks only SQ enabled on Polaris11 Deucher, Alexander
     [not found]     ` <BN6PR12MB1652DFA6EFFE887DC37BC71BF7640-/b2+HYfkarQqUD6E6FAiowdYzm3356FpvxpqHgZTriW3zl9H0oFU5g@public.gmane.org>
2017-01-10  9:41       ` Zhu, Rex

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1483944700-3842-1-git-send-email-Rex.Zhu@amd.com \
    --to=rex.zhu-5c7gfcevmho@public.gmane.org \
    --cc=amd-gfx-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox