From: Alex Deucher <alexdeucher-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: amd-gfx-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
Cc: Alex Deucher <alexander.deucher-5C7GfCeVMHo@public.gmane.org>
Subject: [PATCH 1/2] drm/doc: Add amdgpu hwmon/power documentation
Date: Fri, 1 Jun 2018 13:03:57 -0500 [thread overview]
Message-ID: <20180601180358.3462-1-alexander.deucher@amd.com> (raw)
Document the hwmon and power control interfaces exposed
by the amdgpu driver.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
---
Documentation/gpu/amdgpu.rst | 52 ++++++++++++++++++++++++++++++++++
drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c | 45 +++++++++++++++++++++++------
2 files changed, 89 insertions(+), 8 deletions(-)
diff --git a/Documentation/gpu/amdgpu.rst b/Documentation/gpu/amdgpu.rst
index f557866f6788..1d726b90a619 100644
--- a/Documentation/gpu/amdgpu.rst
+++ b/Documentation/gpu/amdgpu.rst
@@ -18,3 +18,55 @@ PRIME Buffer Sharing
.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_prime.c
:internal:
+
+GPU Power/Thermal Controls and Monitoring
+=========================================
+
+This chapter covers hwmon and power/thermal controls.
+
+HWMON Interfaces
+----------------
+
+.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c
+ :doc: hwmon
+
+GPU sysfs Power State Interfaces
+--------------------------------
+
+GPU power controls are exposed via sysfs files.
+
+power_dpm_state
+~~~~~~~~~~~~~~~
+
+.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c
+ :doc: power_dpm_state
+
+power_dpm_force_performance_level
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c
+ :doc: power_dpm_force_performance_level
+
+pp_table
+~~~~~~~~
+
+.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c
+ :doc: pp_table
+
+pp_od_clk_voltage
+~~~~~~~~~~~~~~~~~
+
+.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c
+ :doc: pp_od_clk_voltage
+
+pp_dpm_sclk pp_dpm_mclk pp_dpm_pcie
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c
+ :doc: pp_dpm_sclk pp_dpm_mclk pp_dpm_pcie
+
+pp_power_profile_mode
+~~~~~~~~~~~~~~~~~~~~~
+
+.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c
+ :doc: pp_power_profile_mode
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c
index b455da487782..f667cb9eb614 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c
@@ -80,12 +80,15 @@ void amdgpu_pm_acpi_event_handler(struct amdgpu_device *adev)
/**
* DOC: power_dpm_state
*
- * This is a legacy interface and is only provided for backwards compatibility.
- * The amdgpu driver provides a sysfs API for adjusting certain power
- * related parameters. The file power_dpm_state is used for this.
+ * The power_dpm_state file is a legacy interface and is only provided for
+ * backwards compatibility. The amdgpu driver provides a sysfs API for adjusting
+ * certain power related parameters. The file power_dpm_state is used for this.
* It accepts the following arguments:
+ *
* - battery
+ *
* - balanced
+ *
* - performance
*
* battery
@@ -169,14 +172,21 @@ static ssize_t amdgpu_set_dpm_state(struct device *dev,
* The amdgpu driver provides a sysfs API for adjusting certain power
* related parameters. The file power_dpm_force_performance_level is
* used for this. It accepts the following arguments:
+ *
* - auto
+ *
* - low
+ *
* - high
+ *
* - manual
- * - GPU fan
+ *
* - profile_standard
+ *
* - profile_min_sclk
+ *
* - profile_min_mclk
+ *
* - profile_peak
*
* auto
@@ -463,8 +473,11 @@ static ssize_t amdgpu_set_pp_table(struct device *dev,
* this.
*
* Reading the file will display:
+ *
* - a list of engine clock levels and voltages labeled OD_SCLK
+ *
* - a list of memory clock levels and voltages labeled OD_MCLK
+ *
* - a list of valid ranges for sclk, mclk, and voltage labeled OD_RANGE
*
* To manually adjust these settings, first select manual using
@@ -1285,35 +1298,51 @@ static ssize_t amdgpu_hwmon_set_power_cap(struct device *dev,
* DOC: hwmon
*
* The amdgpu driver exposes the following sensor interfaces:
+ *
* - GPU temperature (via the on-die sensor)
+ *
* - GPU voltage
+ *
* - Northbridge voltage (APUs only)
+ *
* - GPU power
+ *
* - GPU fan
*
* hwmon interfaces for GPU temperature:
+ *
* - temp1_input: the on die GPU temperature in millidegrees Celsius
+ *
* - temp1_crit: temperature critical max value in millidegrees Celsius
+ *
* - temp1_crit_hyst: temperature hysteresis for critical limit in millidegrees Celsius
*
* hwmon interfaces for GPU voltage:
+ *
* - in0_input: the voltage on the GPU in millivolts
+ *
* - in1_input: the voltage on the Northbridge in millivolts
*
* hwmon interfaces for GPU power:
+ *
* - power1_average: average power used by the GPU in microWatts
+ *
* - power1_cap_min: minimum cap supported in microWatts
+ *
* - power1_cap_max: maximum cap supported in microWatts
+ *
* - power1_cap: selected power cap in microWatts
*
* hwmon interfaces for GPU fan:
+ *
* - pwm1: pulse width modulation fan level (0-255)
- * - pwm1_enable: pulse width modulation fan control method
- * 0: no fan speed control
- * 1: manual fan speed control using pwm interface
- * 2: automatic fan speed control
+ *
+ * - pwm1_enable: pulse width modulation fan control method (0: no fan speed control, 1: manual fan speed control using pwm interface, 2: automatic fan speed control)
+ *
* - pwm1_min: pulse width modulation fan control minimum level (0)
+ *
* - pwm1_max: pulse width modulation fan control maximum level (255)
+ *
* - fan1_input: fan speed in RPM
*
* You can use hwmon tools like sensors to view this information on your system.
--
2.13.6
_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
next reply other threads:[~2018-06-01 18:03 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-01 18:03 Alex Deucher [this message]
[not found] ` <20180601180358.3462-1-alexander.deucher-5C7GfCeVMHo@public.gmane.org>
2018-06-01 18:03 ` [PATCH 2/2] drm/doc: Make naming consistent for Core Driver Infrastructure Alex Deucher
[not found] ` <20180601180358.3462-2-alexander.deucher-5C7GfCeVMHo@public.gmane.org>
2018-06-04 9:11 ` Michel Dänzer
[not found] ` <f3dcab41-b0ad-fb14-5268-b40821e51410-otUistvHUpPR7s880joybQ@public.gmane.org>
2018-06-13 17:45 ` Alex Deucher
[not found] ` <CADnq5_OdOKzkYgH5+anMPdCUHDYAbRtJtyVKEk8zyccq40ah8w-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2018-06-18 8:37 ` Daniel Vetter
2018-06-04 9:13 ` [PATCH 1/2] drm/doc: Add amdgpu hwmon/power documentation Michel Dänzer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180601180358.3462-1-alexander.deucher@amd.com \
--to=alexdeucher-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
--cc=alexander.deucher-5C7GfCeVMHo@public.gmane.org \
--cc=amd-gfx-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox