From: xinhui pan <xinhui.pan@amd.com>
To: <amd-gfx@lists.freedesktop.org>
Cc: <alexander.deucher@amd.com>, <christian.koenig@amd.com>,
<andrey.grodzovsky@amd.com>, xinhui pan <xinhui.pan@amd.com>
Subject: [PATCH] drm/amdgpu: Put drm_dev_enter/exit outside hot codepath
Date: Wed, 15 Sep 2021 09:42:56 +0800 [thread overview]
Message-ID: <20210915014256.20404-1-xinhui.pan@amd.com> (raw)
We hit soft hang while doing memory pressure test on one numa system.
After a qucik look, this is because kfd invalid/valid userptr memory
frequently with process_info lock hold.
perf top says below,
75.81% [kernel] [k] __srcu_read_unlock
6.19% [amdgpu] [k] amdgpu_gmc_set_pte_pde
3.56% [kernel] [k] __srcu_read_lock
2.20% [amdgpu] [k] amdgpu_vm_cpu_update
2.20% [kernel] [k] __sg_page_iter_dma_next
2.15% [drm] [k] drm_dev_enter
1.70% [drm] [k] drm_prime_sg_to_dma_addr_array
1.18% [kernel] [k] __sg_alloc_table_from_pages
1.09% [drm] [k] drm_dev_exit
So move drm_dev_enter/exit outside gmc code, instead let caller do it.
They are gart_unbind, gart_map, vm_cpu_update(already hold in its
caller) and gmc_init_pdb0(no need)
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_gart.c | 11 +++++++++++
drivers/gpu/drm/amd/amdgpu/amdgpu_gmc.c | 7 -------
2 files changed, 11 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_gart.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_gart.c
index 76efd5f8950f..d7e4f4660acf 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_gart.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_gart.c
@@ -34,6 +34,7 @@
#include <asm/set_memory.h>
#endif
#include "amdgpu.h"
+#include <drm/drm_drv.h>
/*
* GART
@@ -230,12 +231,16 @@ int amdgpu_gart_unbind(struct amdgpu_device *adev, uint64_t offset,
u64 page_base;
/* Starting from VEGA10, system bit must be 0 to mean invalid. */
uint64_t flags = 0;
+ int idx;
if (!adev->gart.ready) {
WARN(1, "trying to unbind memory from uninitialized GART !\n");
return -EINVAL;
}
+ if (!drm_dev_enter(&adev->ddev, &idx))
+ return 0;
+
t = offset / AMDGPU_GPU_PAGE_SIZE;
p = t / AMDGPU_GPU_PAGES_IN_CPU_PAGE;
for (i = 0; i < pages; i++, p++) {
@@ -254,6 +259,7 @@ int amdgpu_gart_unbind(struct amdgpu_device *adev, uint64_t offset,
for (i = 0; i < adev->num_vmhubs; i++)
amdgpu_gmc_flush_gpu_tlb(adev, 0, i, 0);
+ drm_dev_exit(idx);
return 0;
}
@@ -276,12 +282,16 @@ int amdgpu_gart_map(struct amdgpu_device *adev, uint64_t offset,
{
uint64_t page_base;
unsigned i, j, t;
+ int idx;
if (!adev->gart.ready) {
WARN(1, "trying to bind memory to uninitialized GART !\n");
return -EINVAL;
}
+ if (!drm_dev_enter(&adev->ddev, &idx))
+ return 0;
+
t = offset / AMDGPU_GPU_PAGE_SIZE;
for (i = 0; i < pages; i++) {
@@ -291,6 +301,7 @@ int amdgpu_gart_map(struct amdgpu_device *adev, uint64_t offset,
page_base += AMDGPU_GPU_PAGE_SIZE;
}
}
+ drm_dev_exit(idx);
return 0;
}
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_gmc.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_gmc.c
index 54f059501a33..e973488250e8 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_gmc.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_gmc.c
@@ -31,7 +31,6 @@
#include "amdgpu_ras.h"
#include "amdgpu_xgmi.h"
-#include <drm/drm_drv.h>
/**
* amdgpu_gmc_pdb0_alloc - allocate vram for pdb0
@@ -153,10 +152,6 @@ int amdgpu_gmc_set_pte_pde(struct amdgpu_device *adev, void *cpu_pt_addr,
{
void __iomem *ptr = (void *)cpu_pt_addr;
uint64_t value;
- int idx;
-
- if (!drm_dev_enter(&adev->ddev, &idx))
- return 0;
/*
* The following is for PTE only. GART does not have PDEs.
@@ -165,8 +160,6 @@ int amdgpu_gmc_set_pte_pde(struct amdgpu_device *adev, void *cpu_pt_addr,
value |= flags;
writeq(value, ptr + (gpu_page_idx * 8));
- drm_dev_exit(idx);
-
return 0;
}
--
2.25.1
next reply other threads:[~2021-09-15 1:43 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-15 1:42 xinhui pan [this message]
2021-09-15 3:02 ` [PATCH] drm/amdgpu: Put drm_dev_enter/exit outside hot codepath Andrey Grodzovsky
[not found] ` <DM4PR12MB5165765C26B44904E030B1C587DB9@DM4PR12MB5165.namprd12.prod.outlook.com>
2021-09-15 4:13 ` 回复: " Andrey Grodzovsky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210915014256.20404-1-xinhui.pan@amd.com \
--to=xinhui.pan@amd.com \
--cc=alexander.deucher@amd.com \
--cc=amd-gfx@lists.freedesktop.org \
--cc=andrey.grodzovsky@amd.com \
--cc=christian.koenig@amd.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox