From: Hamza Mahfooz <hamza.mahfooz@amd.com>
To: <amd-gfx@lists.freedesktop.org>
Cc: stable@vger.kernel.org,
"Aurabindo Pillai" <aurabindo.pillai@amd.com>,
"Mario Limonciello" <mario.limonciello@amd.com>,
"Thomas Zimmermann" <tzimmermann@suse.de>,
"Alex Deucher" <alexander.deucher@amd.com>,
"Christian König" <christian.koenig@amd.com>,
"Hamza Mahfooz" <hamza.mahfooz@amd.com>
Subject: [PATCH v3] drm/amdgpu: register a dirty framebuffer callback for fbcon
Date: Wed, 23 Aug 2023 17:44:50 -0400 [thread overview]
Message-ID: <20230823214450.345994-1-hamza.mahfooz@amd.com> (raw)
fbcon requires that we implement &drm_framebuffer_funcs.dirty.
Otherwise, the framebuffer might take a while to flush (which would
manifest as noticeable lag). However, we can't enable this callback for
non-fbcon cases since it may cause too many atomic commits to be made at
once. So, implement amdgpu_dirtyfb() and only enable it for fbcon
framebuffers (we can use the "struct drm_file file" parameter in the
callback to check for this since it is only NULL when called by fbcon,
at least in the mainline kernel) on devices that support atomic KMS.
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: stable@vger.kernel.org # 6.1+
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2519
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
--
v3: check if file is NULL instead of doing a strcmp() and make note of
it in the commit message
---
drivers/gpu/drm/amd/amdgpu/amdgpu_display.c | 26 ++++++++++++++++++++-
1 file changed, 25 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c
index d20dd3f852fc..363e6a2cad8c 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c
@@ -38,6 +38,8 @@
#include <linux/pci.h>
#include <linux/pm_runtime.h>
#include <drm/drm_crtc_helper.h>
+#include <drm/drm_damage_helper.h>
+#include <drm/drm_drv.h>
#include <drm/drm_edid.h>
#include <drm/drm_fb_helper.h>
#include <drm/drm_gem_framebuffer_helper.h>
@@ -532,11 +534,29 @@ bool amdgpu_display_ddc_probe(struct amdgpu_connector *amdgpu_connector,
return true;
}
+static int amdgpu_dirtyfb(struct drm_framebuffer *fb, struct drm_file *file,
+ unsigned int flags, unsigned int color,
+ struct drm_clip_rect *clips, unsigned int num_clips)
+{
+
+ if (file)
+ return -ENOSYS;
+
+ return drm_atomic_helper_dirtyfb(fb, file, flags, color, clips,
+ num_clips);
+}
+
static const struct drm_framebuffer_funcs amdgpu_fb_funcs = {
.destroy = drm_gem_fb_destroy,
.create_handle = drm_gem_fb_create_handle,
};
+static const struct drm_framebuffer_funcs amdgpu_fb_funcs_atomic = {
+ .destroy = drm_gem_fb_destroy,
+ .create_handle = drm_gem_fb_create_handle,
+ .dirty = amdgpu_dirtyfb
+};
+
uint32_t amdgpu_display_supported_domains(struct amdgpu_device *adev,
uint64_t bo_flags)
{
@@ -1139,7 +1159,11 @@ static int amdgpu_display_gem_fb_verify_and_init(struct drm_device *dev,
if (ret)
goto err;
- ret = drm_framebuffer_init(dev, &rfb->base, &amdgpu_fb_funcs);
+ if (drm_drv_uses_atomic_modeset(dev))
+ ret = drm_framebuffer_init(dev, &rfb->base,
+ &amdgpu_fb_funcs_atomic);
+ else
+ ret = drm_framebuffer_init(dev, &rfb->base, &amdgpu_fb_funcs);
if (ret)
goto err;
--
2.41.0
next reply other threads:[~2023-08-23 21:45 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-23 21:44 Hamza Mahfooz [this message]
2023-08-23 21:47 ` [PATCH v3] drm/amdgpu: register a dirty framebuffer callback for fbcon Mario Limonciello
2023-08-23 21:49 ` Hamza Mahfooz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230823214450.345994-1-hamza.mahfooz@amd.com \
--to=hamza.mahfooz@amd.com \
--cc=alexander.deucher@amd.com \
--cc=amd-gfx@lists.freedesktop.org \
--cc=aurabindo.pillai@amd.com \
--cc=christian.koenig@amd.com \
--cc=mario.limonciello@amd.com \
--cc=stable@vger.kernel.org \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox