From: Lang Yu <Lang.Yu@amd.com>
To: <amd-gfx@lists.freedesktop.org>
Cc: Lang Yu <Lang.Yu@amd.com>,
Veerabadhran Gopalakrishnan <Veerabadhran.Gopalakrishnan@amd.com>
Subject: [PATCH 2/2] drm/amdgpu: enable UMSCH 4.0.6
Date: Fri, 22 Mar 2024 10:53:14 +0800 [thread overview]
Message-ID: <20240322025314.3104595-2-Lang.Yu@amd.com> (raw)
In-Reply-To: <20240322025314.3104595-1-Lang.Yu@amd.com>
Share same codes with 4.0.5 and enable collaborate mode for VPE.
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Veerabadhran Gopalakrishnan <Veerabadhran.Gopalakrishnan@amd.com>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c | 1 +
drivers/gpu/drm/amd/amdgpu/amdgpu_umsch_mm.c | 12 ++++++++++--
drivers/gpu/drm/amd/amdgpu/umsch_mm_v4_0.c | 7 +++++--
3 files changed, 16 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c
index 3c407164837b..07c5fca06178 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c
@@ -2247,6 +2247,7 @@ static int amdgpu_discovery_set_umsch_mm_ip_blocks(struct amdgpu_device *adev)
{
switch (amdgpu_ip_version(adev, VCN_HWIP, 0)) {
case IP_VERSION(4, 0, 5):
+ case IP_VERSION(4, 0, 6):
if (amdgpu_umsch_mm & 0x1) {
amdgpu_device_ip_block_add(adev, &umsch_mm_v4_0_ip_block);
adev->enable_umsch_mm = true;
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_umsch_mm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_umsch_mm.c
index 99210a3b1044..95f80b9131a8 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_umsch_mm.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_umsch_mm.c
@@ -189,10 +189,13 @@ static void setup_vpe_queue(struct amdgpu_device *adev,
mqd->rptr_val = 0;
mqd->unmapped = 1;
+ if (adev->vpe.collaborate_mode)
+ memcpy(++mqd, test->mqd_data_cpu_addr, sizeof(struct MQD_INFO));
+
qinfo->mqd_addr = test->mqd_data_gpu_addr;
qinfo->csa_addr = test->ctx_data_gpu_addr +
offsetof(struct umsch_mm_test_ctx_data, vpe_ctx_csa);
- qinfo->doorbell_offset_0 = (adev->doorbell_index.vpe_ring + 1) << 1;
+ qinfo->doorbell_offset_0 = 0;
qinfo->doorbell_offset_1 = 0;
}
@@ -287,7 +290,10 @@ static int submit_vpe_queue(struct amdgpu_device *adev, struct umsch_mm_test *te
ring[5] = 0;
mqd->wptr_val = (6 << 2);
- // WDOORBELL32(adev->umsch_mm.agdb_index[CONTEXT_PRIORITY_LEVEL_NORMAL], mqd->wptr_val);
+ if (adev->vpe.collaborate_mode)
+ (++mqd)->wptr_val = (6 << 2);
+
+ WDOORBELL32(adev->umsch_mm.agdb_index[CONTEXT_PRIORITY_LEVEL_NORMAL], mqd->wptr_val);
for (i = 0; i < adev->usec_timeout; i++) {
if (*fence == test_pattern)
@@ -571,6 +577,7 @@ int amdgpu_umsch_mm_init_microcode(struct amdgpu_umsch_mm *umsch)
switch (amdgpu_ip_version(adev, VCN_HWIP, 0)) {
case IP_VERSION(4, 0, 5):
+ case IP_VERSION(4, 0, 6):
fw_name = "amdgpu/umsch_mm_4_0_0.bin";
break;
default:
@@ -750,6 +757,7 @@ static int umsch_mm_early_init(void *handle)
switch (amdgpu_ip_version(adev, VCN_HWIP, 0)) {
case IP_VERSION(4, 0, 5):
+ case IP_VERSION(4, 0, 6):
umsch_mm_v4_0_set_funcs(&adev->umsch_mm);
break;
default:
diff --git a/drivers/gpu/drm/amd/amdgpu/umsch_mm_v4_0.c b/drivers/gpu/drm/amd/amdgpu/umsch_mm_v4_0.c
index 8e7b763cfdb7..84368cf1e175 100644
--- a/drivers/gpu/drm/amd/amdgpu/umsch_mm_v4_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/umsch_mm_v4_0.c
@@ -60,7 +60,7 @@ static int umsch_mm_v4_0_load_microcode(struct amdgpu_umsch_mm *umsch)
umsch->cmd_buf_curr_ptr = umsch->cmd_buf_ptr;
- if (amdgpu_ip_version(adev, VCN_HWIP, 0) == IP_VERSION(4, 0, 5)) {
+ if (amdgpu_ip_version(adev, VCN_HWIP, 0) >= IP_VERSION(4, 0, 5)) {
WREG32_SOC15(VCN, 0, regUVD_IPX_DLDO_CONFIG,
1 << UVD_IPX_DLDO_CONFIG__ONO0_PWR_CONFIG__SHIFT);
SOC15_WAIT_ON_RREG(VCN, 0, regUVD_IPX_DLDO_STATUS,
@@ -248,7 +248,7 @@ static int umsch_mm_v4_0_ring_stop(struct amdgpu_umsch_mm *umsch)
data = REG_SET_FIELD(data, VCN_UMSCH_RB_DB_CTRL, EN, 0);
WREG32_SOC15(VCN, 0, regVCN_UMSCH_RB_DB_CTRL, data);
- if (amdgpu_ip_version(adev, VCN_HWIP, 0) == IP_VERSION(4, 0, 5)) {
+ if (amdgpu_ip_version(adev, VCN_HWIP, 0) >= IP_VERSION(4, 0, 5)) {
WREG32_SOC15(VCN, 0, regUVD_IPX_DLDO_CONFIG,
2 << UVD_IPX_DLDO_CONFIG__ONO0_PWR_CONFIG__SHIFT);
SOC15_WAIT_ON_RREG(VCN, 0, regUVD_IPX_DLDO_STATUS,
@@ -271,6 +271,8 @@ static int umsch_mm_v4_0_set_hw_resources(struct amdgpu_umsch_mm *umsch)
set_hw_resources.vmid_mask_mm_vcn = umsch->vmid_mask_mm_vcn;
set_hw_resources.vmid_mask_mm_vpe = umsch->vmid_mask_mm_vpe;
+ set_hw_resources.collaboration_mask_vpe =
+ adev->vpe.collaborate_mode ? 0x3 : 0x0;
set_hw_resources.engine_mask = umsch->engine_mask;
set_hw_resources.vcn0_hqd_mask[0] = umsch->vcn0_hqd_mask;
@@ -346,6 +348,7 @@ static int umsch_mm_v4_0_add_queue(struct amdgpu_umsch_mm *umsch,
add_queue.h_queue = input_ptr->h_queue;
add_queue.vm_context_cntl = input_ptr->vm_context_cntl;
add_queue.is_context_suspended = input_ptr->is_context_suspended;
+ add_queue.collaboration_mode = adev->vpe.collaborate_mode ? 1 : 0;
add_queue.api_status.api_completion_fence_addr = umsch->ring.fence_drv.gpu_addr;
add_queue.api_status.api_completion_fence_value = ++umsch->ring.fence_drv.sync_seq;
--
2.25.1
next prev parent reply other threads:[~2024-03-22 2:54 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-03-22 2:53 [PATCH 1/2] drm/amdgpu/umsch: update UMSCH 4.0 FW interface Lang Yu
2024-03-22 2:53 ` Lang Yu [this message]
2024-03-22 16:31 ` [PATCH 2/2] drm/amdgpu: enable UMSCH 4.0.6 Deucher, Alexander
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240322025314.3104595-2-Lang.Yu@amd.com \
--to=lang.yu@amd.com \
--cc=Veerabadhran.Gopalakrishnan@amd.com \
--cc=amd-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox