[PATCH v5 00/11] Improvements to S5 power consumption

[PATCH v5 00/11] Improvements to S5 power consumption

[Mario Limonciello (AMD)]

A variety of issues both in function and in power consumption have been
raised as a result of devices not being put into a low power state when
the system is powered off.

There have been some localized changes[1] to PCI core to help these issues,
but they have had various downsides.

This series instead tries to use the S4 flow when the system is being
powered off.  This lines up the behavior with what other operating systems
do as well.  If for some reason that fails or is not supported, run their
shutdown() callbacks.

Cc: AceLan Kao <acelan.kao@canonical.com>
Cc: Kai-Heng Feng <kaihengf@nvidia.com>
Cc: Mark Pearson <mpearson-lenovo@squebb.ca>
Cc: Merthan Karakaş <m3rthn.k@gmail.com>
Cc: Eric Naim <dnaim@cachyos.org>
---
v4->v5:
 * Rebase on v6.17-rc1
 * Re-order series to be more bisectable for issues
 * Add tags where relevant
 * Split up PCI patches into more easily reviewable "chunks".

Mario Limonciello (AMD) (11):
  PM: Introduce new PMSG_POWEROFF event
  scsi: Add PM_EVENT_POWEROFF into suspend callbacks
  usb: sl811-hcd: Add PM_EVENT_POWEROFF into suspend callbacks
  USB: Pass PMSG_POWEROFF event to suspend_common() for poweroff with S4
    flow
  PCI: PM: Disable device wakeups when halting system through S4 flow
  PCI: PM: Split out code from pci_pm_suspend_noirq() into helper
  PCI: PM: Run bridge power up actions as part of restore phase
  PCI: PM: Use pci_power_manageable() in pci_pm_poweroff_noirq()
  PCI: Put PCIe ports with downstream devices into D3 at hibernate
  drm/amd: Avoid evicting resources at S5
  PM: Use hibernate flows for system power off

 drivers/base/power/main.c                  |  7 ++
 drivers/gpu/drm/amd/amdgpu/amdgpu_device.c |  4 +
 drivers/pci/pci-driver.c                   | 99 +++++++++++++++-------
 drivers/scsi/mesh.c                        |  1 +
 drivers/scsi/stex.c                        |  1 +
 drivers/usb/core/hcd-pci.c                 | 10 ++-
 drivers/usb/host/sl811-hcd.c               |  1 +
 include/linux/pm.h                         |  5 +-
 include/trace/events/power.h               |  3 +-
 kernel/reboot.c                            |  6 ++
 10 files changed, 102 insertions(+), 35 deletions(-)


base-commit: 8f5ae30d69d7543eee0d70083daf4de8fe15d585
-- 
2.43.0

[PATCH v5 01/11] PM: Introduce new PMSG_POWEROFF event

[Mario Limonciello (AMD)]

PMSG_POWEROFF will be used for the PM core to allow differentiating between
an S4 or S5 shutdown sequence when re-using callbacks.

This event should not have wakeups enabled so update PMSG_NO_WAKEUP() to
match it as well.

Tested-by: Eric Naim <dnaim@cachyos.org>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
---
v5:
 * Re-order and split
 * Add tags
v4:
 * https://lore.kernel.org/linux-pci/20250616175019.3471583-1-superm1@kernel.org/
---
 drivers/base/power/main.c    | 7 +++++++
 include/linux/pm.h           | 5 ++++-
 include/trace/events/power.h | 3 ++-
 3 files changed, 13 insertions(+), 2 deletions(-)

diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c
index dbf5456cd891b..c59ab5286d9a5 100644
--- a/drivers/base/power/main.c
+++ b/drivers/base/power/main.c
@@ -99,6 +99,8 @@ static const char *pm_verb(int event)
 		return "restore";
 	case PM_EVENT_RECOVER:
 		return "recover";
+	case PM_EVENT_POWEROFF:
+		return "poweroff";
 	default:
 		return "(unknown PM event)";
 	}
@@ -369,6 +371,7 @@ static pm_callback_t pm_op(const struct dev_pm_ops *ops, pm_message_t state)
 	case PM_EVENT_FREEZE:
 	case PM_EVENT_QUIESCE:
 		return ops->freeze;
+	case PM_EVENT_POWEROFF:
 	case PM_EVENT_HIBERNATE:
 		return ops->poweroff;
 	case PM_EVENT_THAW:
@@ -403,6 +406,7 @@ static pm_callback_t pm_late_early_op(const struct dev_pm_ops *ops,
 	case PM_EVENT_FREEZE:
 	case PM_EVENT_QUIESCE:
 		return ops->freeze_late;
+	case PM_EVENT_POWEROFF:
 	case PM_EVENT_HIBERNATE:
 		return ops->poweroff_late;
 	case PM_EVENT_THAW:
@@ -437,6 +441,7 @@ static pm_callback_t pm_noirq_op(const struct dev_pm_ops *ops, pm_message_t stat
 	case PM_EVENT_FREEZE:
 	case PM_EVENT_QUIESCE:
 		return ops->freeze_noirq;
+	case PM_EVENT_POWEROFF:
 	case PM_EVENT_HIBERNATE:
 		return ops->poweroff_noirq;
 	case PM_EVENT_THAW:
@@ -1370,6 +1375,8 @@ static pm_message_t resume_event(pm_message_t sleep_state)
 		return PMSG_RECOVER;
 	case PM_EVENT_HIBERNATE:
 		return PMSG_RESTORE;
+	case PM_EVENT_POWEROFF:
+		return PMSG_ON;
 	}
 	return PMSG_ON;
 }
diff --git a/include/linux/pm.h b/include/linux/pm.h
index cc7b2dc28574c..892bd93f13dad 100644
--- a/include/linux/pm.h
+++ b/include/linux/pm.h
@@ -507,6 +507,7 @@ const struct dev_pm_ops name = { \
  * RECOVER	Creation of a hibernation image or restoration of the main
  *		memory contents from a hibernation image has failed, call
  *		->thaw() and ->complete() for all devices.
+ * POWEROFF	System will poweroff, call ->poweroff() for all devices.
  *
  * The following PM_EVENT_ messages are defined for internal use by
  * kernel subsystems.  They are never issued by the PM core.
@@ -537,6 +538,7 @@ const struct dev_pm_ops name = { \
 #define PM_EVENT_USER		0x0100
 #define PM_EVENT_REMOTE		0x0200
 #define PM_EVENT_AUTO		0x0400
+#define PM_EVENT_POWEROFF	0x0800
 
 #define PM_EVENT_SLEEP		(PM_EVENT_SUSPEND | PM_EVENT_HIBERNATE)
 #define PM_EVENT_USER_SUSPEND	(PM_EVENT_USER | PM_EVENT_SUSPEND)
@@ -551,6 +553,7 @@ const struct dev_pm_ops name = { \
 #define PMSG_QUIESCE	((struct pm_message){ .event = PM_EVENT_QUIESCE, })
 #define PMSG_SUSPEND	((struct pm_message){ .event = PM_EVENT_SUSPEND, })
 #define PMSG_HIBERNATE	((struct pm_message){ .event = PM_EVENT_HIBERNATE, })
+#define PMSG_POWEROFF	((struct pm_message){ .event = PM_EVENT_POWEROFF, })
 #define PMSG_RESUME	((struct pm_message){ .event = PM_EVENT_RESUME, })
 #define PMSG_THAW	((struct pm_message){ .event = PM_EVENT_THAW, })
 #define PMSG_RESTORE	((struct pm_message){ .event = PM_EVENT_RESTORE, })
@@ -568,7 +571,7 @@ const struct dev_pm_ops name = { \
 
 #define PMSG_IS_AUTO(msg)	(((msg).event & PM_EVENT_AUTO) != 0)
 #define PMSG_NO_WAKEUP(msg)	(((msg).event & \
-				(PM_EVENT_FREEZE | PM_EVENT_QUIESCE)) != 0)
+				(PM_EVENT_FREEZE | PM_EVENT_QUIESCE | PM_EVENT_POWEROFF)) != 0)
 /*
  * Device run-time power management status.
  *
diff --git a/include/trace/events/power.h b/include/trace/events/power.h
index 82904291c2b81..370f8df2fdb4b 100644
--- a/include/trace/events/power.h
+++ b/include/trace/events/power.h
@@ -179,7 +179,8 @@ TRACE_EVENT(pstate_sample,
 		{ PM_EVENT_HIBERNATE, "hibernate" }, \
 		{ PM_EVENT_THAW, "thaw" }, \
 		{ PM_EVENT_RESTORE, "restore" }, \
-		{ PM_EVENT_RECOVER, "recover" })
+		{ PM_EVENT_RECOVER, "recover" }, \
+		{ PM_EVENT_POWEROFF, "poweroff" })
 
 DEFINE_EVENT(cpu, cpu_frequency,
 
-- 
2.43.0

[PATCH v5 02/11] scsi: Add PM_EVENT_POWEROFF into suspend callbacks

[Mario Limonciello (AMD)]

When the ACPI core uses hibernation callbacks for shutdown drivers
will receive PM_EVENT_POWEROFF and should handle it the same as
PM_EVENT_HIBERNATE would have been used.

Tested-by: Eric Naim <dnaim@cachyos.org>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
---
v5:
 * Re-order
v4:
 * https://lore.kernel.org/linux-pci/20250616175019.3471583-1-superm1@kernel.org/
---
 drivers/scsi/mesh.c | 1 +
 drivers/scsi/stex.c | 1 +
 2 files changed, 2 insertions(+)

diff --git a/drivers/scsi/mesh.c b/drivers/scsi/mesh.c
index 1c15cac41d805..768b85eecc8fd 100644
--- a/drivers/scsi/mesh.c
+++ b/drivers/scsi/mesh.c
@@ -1762,6 +1762,7 @@ static int mesh_suspend(struct macio_dev *mdev, pm_message_t mesg)
 	case PM_EVENT_SUSPEND:
 	case PM_EVENT_HIBERNATE:
 	case PM_EVENT_FREEZE:
+	case PM_EVENT_POWEROFF:
 		break;
 	default:
 		return 0;
diff --git a/drivers/scsi/stex.c b/drivers/scsi/stex.c
index 63ed7f9aaa937..ee9372e1f7f07 100644
--- a/drivers/scsi/stex.c
+++ b/drivers/scsi/stex.c
@@ -1965,6 +1965,7 @@ static int stex_choice_sleep_mic(struct st_hba *hba, pm_message_t state)
 	case PM_EVENT_SUSPEND:
 		return ST_S3;
 	case PM_EVENT_HIBERNATE:
+	case PM_EVENT_POWEROFF:
 		hba->msi_lock = 0;
 		return ST_S4;
 	default:
-- 
2.43.0

[PATCH v5 03/11] usb: sl811-hcd: Add PM_EVENT_POWEROFF into suspend callbacks

[Mario Limonciello (AMD)]

When the ACPI core uses hibernation callbacks for shutdown drivers
will receive PM_EVENT_POWEROFF and should handle it the same as
PM_EVENT_HIBERNATE would have been used.

Tested-by: Eric Naim <dnaim@cachyos.org>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
---
v5:
 * Re-order
 * Add tags
v4:
 * https://lore.kernel.org/linux-pci/20250616175019.3471583-1-superm1@kernel.org/
---
 drivers/usb/host/sl811-hcd.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
index ea3cab99c5d40..5d6dba681e503 100644
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -1748,6 +1748,7 @@ sl811h_suspend(struct platform_device *dev, pm_message_t state)
 		break;
 	case PM_EVENT_SUSPEND:
 	case PM_EVENT_HIBERNATE:
+	case PM_EVENT_POWEROFF:
 	case PM_EVENT_PRETHAW:		/* explicitly discard hw state */
 		port_power(sl811, 0);
 		break;
-- 
2.43.0

[PATCH v5 04/11] USB: Pass PMSG_POWEROFF event to suspend_common() for poweroff with S4 flow

[Mario Limonciello (AMD)]

If powering off the system with the S4 flow USB wakeup sources should
be ignored. Add a new callback hcd_pci_poweroff() which will differentiate
whether target state is S5 and pass PMSG_POWEROFF as the message so that
suspend_common() will avoid doing wakeups.

Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
---
v5:
 * New patch
v4:
 * https://lore.kernel.org/linux-pci/20250616175019.3471583-1-superm1@kernel.org/
---
 drivers/usb/core/hcd-pci.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index cd223475917ef..bfbd715c8cae9 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -6,6 +6,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/pci.h>
+#include <linux/pm.h>
 #include <linux/usb.h>
 #include <linux/usb/hcd.h>
 
@@ -531,6 +532,13 @@ static int hcd_pci_freeze(struct device *dev)
 	return suspend_common(dev, PMSG_FREEZE);
 }
 
+static int hcd_pci_poweroff(struct device *dev)
+{
+	if (system_state == SYSTEM_HALT || system_state == SYSTEM_POWER_OFF)
+		return suspend_common(dev, PMSG_POWEROFF);
+	return suspend_common(dev, PMSG_SUSPEND);
+}
+
 static int hcd_pci_suspend_noirq(struct device *dev)
 {
 	struct pci_dev		*pci_dev = to_pci_dev(dev);
@@ -639,7 +647,7 @@ const struct dev_pm_ops usb_hcd_pci_pm_ops = {
 	.freeze_noirq	= check_root_hub_suspended,
 	.thaw_noirq	= NULL,
 	.thaw		= hcd_pci_resume,
-	.poweroff	= hcd_pci_suspend,
+	.poweroff	= hcd_pci_poweroff,
 	.poweroff_late	= hcd_pci_poweroff_late,
 	.poweroff_noirq	= hcd_pci_suspend_noirq,
 	.restore_noirq	= hcd_pci_resume_noirq,
-- 
2.43.0

[PATCH v5 05/11] PCI: PM: Disable device wakeups when halting system through S4 flow

[Mario Limonciello (AMD)]

PCI devices can be programmed as a wakeup source from low power states
by sysfs.  However when using the S4 flow to go into S5 these wakeup
sources should be disabled to avoid what users would perceive as
spurious wakeup events.

Tested-by: Eric Naim <dnaim@cachyos.org>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
---
v5:
 * Re-order
 * Add tags
v4:
 * https://lore.kernel.org/linux-pci/20250616175019.3471583-1-superm1@kernel.org/
---
 drivers/pci/pci-driver.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index 63665240ae87f..f201d298d7173 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -1139,6 +1139,10 @@ static int pci_pm_poweroff(struct device *dev)
 	struct pci_dev *pci_dev = to_pci_dev(dev);
 	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
 
+	if (device_may_wakeup(dev) &&
+	    (system_state == SYSTEM_HALT || system_state == SYSTEM_POWER_OFF))
+		device_set_wakeup_enable(dev, false);
+
 	if (pci_has_legacy_pm_support(pci_dev))
 		return pci_legacy_suspend(dev, PMSG_HIBERNATE);
 
-- 
2.43.0

[PATCH v5 06/11] PCI: PM: Split out code from pci_pm_suspend_noirq() into helper

[Mario Limonciello (AMD)]

In order to unify suspend and hibernate codepaths without code duplication
the common code should be in common helpers.  Move it from
pci_pm_suspend_noirq() into a helper.  No intended functional changes.

Tested-by: Eric Naim <dnaim@cachyos.org>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
---
v5:
 * Split from earlier patches
 * Add tags
v4:
 * https://lore.kernel.org/linux-pci/20250616175019.3471583-1-superm1@kernel.org/
---
 drivers/pci/pci-driver.c | 81 +++++++++++++++++++++++++---------------
 1 file changed, 51 insertions(+), 30 deletions(-)

diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index f201d298d7173..571a3809f163a 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -762,6 +762,54 @@ static void pci_pm_complete(struct device *dev)
 
 #endif /* !CONFIG_PM_SLEEP */
 
+#if defined(CONFIG_SUSPEND)
+/**
+ * pci_pm_suspend_noirq_common
+ * @pci_dev: pci device
+ * @skip_bus_pm: pointer to a boolean indicating whether to skip bus PM
+ *
+ * Prepare the device to go into a low power state by saving state and
+ * deciding whether to skip bus PM.
+ *
+ */
+static void pci_pm_suspend_noirq_common(struct pci_dev *pci_dev, bool *skip_bus_pm)
+{
+	if (!pci_dev->state_saved) {
+		pci_save_state(pci_dev);
+
+		/*
+		 * If the device is a bridge with a child in D0 below it,
+		 * it needs to stay in D0, so check skip_bus_pm to avoid
+		 * putting it into a low-power state in that case.
+		 */
+		if (!pci_dev->skip_bus_pm && pci_power_manageable(pci_dev))
+			pci_prepare_to_sleep(pci_dev);
+	}
+
+	pci_dbg(pci_dev, "PCI PM: Sleep power state: %s\n",
+		pci_power_name(pci_dev->current_state));
+
+	if (pci_dev->current_state == PCI_D0) {
+		pci_dev->skip_bus_pm = true;
+		/*
+		 * Per PCI PM r1.2, table 6-1, a bridge must be in D0 if any
+		 * downstream device is in D0, so avoid changing the power state
+		 * of the parent bridge by setting the skip_bus_pm flag for it.
+		 */
+		if (pci_dev->bus->self)
+			pci_dev->bus->self->skip_bus_pm = true;
+	}
+
+	if (pci_dev->skip_bus_pm && pm_suspend_no_platform()) {
+		pci_dbg(pci_dev, "PCI PM: Skipped\n");
+		*skip_bus_pm = true;
+		return;
+	}
+
+	pci_pm_set_unknown_state(pci_dev);
+}
+#endif /* CONFIG_SUSPEND */
+
 #ifdef CONFIG_SUSPEND
 static void pcie_pme_root_status_cleanup(struct pci_dev *pci_dev)
 {
@@ -851,6 +899,7 @@ static int pci_pm_suspend_noirq(struct device *dev)
 {
 	struct pci_dev *pci_dev = to_pci_dev(dev);
 	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+	bool skip_bus_pm = false;
 
 	if (dev_pm_skip_suspend(dev))
 		return 0;
@@ -881,38 +930,10 @@ static int pci_pm_suspend_noirq(struct device *dev)
 		}
 	}
 
-	if (!pci_dev->state_saved) {
-		pci_save_state(pci_dev);
-
-		/*
-		 * If the device is a bridge with a child in D0 below it,
-		 * it needs to stay in D0, so check skip_bus_pm to avoid
-		 * putting it into a low-power state in that case.
-		 */
-		if (!pci_dev->skip_bus_pm && pci_power_manageable(pci_dev))
-			pci_prepare_to_sleep(pci_dev);
-	}
-
-	pci_dbg(pci_dev, "PCI PM: Suspend power state: %s\n",
-		pci_power_name(pci_dev->current_state));
+	pci_pm_suspend_noirq_common(pci_dev, &skip_bus_pm);
 
-	if (pci_dev->current_state == PCI_D0) {
-		pci_dev->skip_bus_pm = true;
-		/*
-		 * Per PCI PM r1.2, table 6-1, a bridge must be in D0 if any
-		 * downstream device is in D0, so avoid changing the power state
-		 * of the parent bridge by setting the skip_bus_pm flag for it.
-		 */
-		if (pci_dev->bus->self)
-			pci_dev->bus->self->skip_bus_pm = true;
-	}
-
-	if (pci_dev->skip_bus_pm && pm_suspend_no_platform()) {
-		pci_dbg(pci_dev, "PCI PM: Skipped\n");
+	if (skip_bus_pm)
 		goto Fixup;
-	}
-
-	pci_pm_set_unknown_state(pci_dev);
 
 	/*
 	 * Some BIOSes from ASUS have a bug: If a USB EHCI host controller's
-- 
2.43.0

[PATCH v5 07/11] PCI: PM: Run bridge power up actions as part of restore phase

[Mario Limonciello (AMD)]

Suspend resume actions will check the state of the device and whether
bus PM should be skipped.  These same actions make sense during hibernation
image restore.  Apply them there as well.

Tested-by: Eric Naim <dnaim@cachyos.org>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
---
v5:
 * Split out patch
---
 drivers/pci/pci-driver.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index 571a3809f163a..fb6f1f60b2f1f 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -1246,10 +1246,15 @@ static int pci_pm_restore_noirq(struct device *dev)
 {
 	struct pci_dev *pci_dev = to_pci_dev(dev);
 	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+	pci_power_t prev_state = pci_dev->current_state;
+	bool skip_bus_pm = pci_dev->skip_bus_pm;
 
 	pci_pm_default_resume_early(pci_dev);
 	pci_fixup_device(pci_fixup_resume_early, pci_dev);
 
+	if (!skip_bus_pm && prev_state == PCI_D3cold)
+		pci_pm_bridge_power_up_actions(pci_dev);
+
 	if (pci_has_legacy_pm_support(pci_dev))
 		return 0;
 
-- 
2.43.0

[PATCH v5 08/11] PCI: PM: Use pci_power_manageable() in pci_pm_poweroff_noirq()

[Mario Limonciello (AMD)]

Devices with no subordinate should be put into D3 during hibernate, but
devices that have bridge_d3 set should also be put to sleep during
hibernate. Adjust the check in pci_pm_poweroff_noirq() to use
pci_power_manageable() to cover those as well.

Tested-by: Eric Naim <dnaim@cachyos.org>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
---
v5:
 * Split out patch
---
 drivers/pci/pci-driver.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index fb6f1f60b2f1f..c563fd6af979d 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -1227,7 +1227,7 @@ static int pci_pm_poweroff_noirq(struct device *dev)
 			return error;
 	}
 
-	if (!pci_dev->state_saved && !pci_has_subordinate(pci_dev))
+	if (!pci_dev->state_saved && pci_power_manageable(pci_dev))
 		pci_prepare_to_sleep(pci_dev);
 
 	/*
-- 
2.43.0

[PATCH v5 09/11] PCI: Put PCIe ports with downstream devices into D3 at hibernate

[Mario Limonciello (AMD)]

For the suspend flow PCIe ports that have downstream devices are put into
the appropriate D3 state when children are not in D0. For the hibernate
flow, PCIe ports with downstream devices stay in D0 however. This can
lead to PCIe ports that are remained powered on needlessly during
hibernate.

Adjust the pci_pm_poweroff_noirq() to follow the same flow as
pci_pm_suspend_noirq() by using pci_pm_suspend_noirq_common().

This introduces a functional change that the hibernate flow will now
call pci_save_state() and unless bus PM is skipped will also set
the PCIe device into an unknown state.

Cc: AceLan Kao <acelan.kao@canonical.com>
Cc: Kai-Heng Feng <kaihengf@nvidia.com>
Cc: Mark Pearson <mpearson-lenovo@squebb.ca>
Cc: Denis Benato <benato.denis96@gmail.com>
Cc: Merthan Karakaş <m3rthn.k@gmail.com>
Tested-by: Eric Naim <dnaim@cachyos.org>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
---
v5:
 * Split out into more patches
 * Rewrite commit
 * Add tag
v4:
 * Use helper even when CONFIG_SUSPEND not set (LKP robot)
 * https://lore.kernel.org/linux-pci/20250616175019.3471583-1-superm1@kernel.org/
v3:
 * Split out common code between suspend_noirq() and poweroff_noirq()
   to a helper function
 * https://lore.kernel.org/linux-pm/20250609024619.407257-1-superm1@kernel.org/T/#me6db0fb946e3d604a8f3d455128844ed802c82bb
---
 drivers/pci/pci-driver.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index c563fd6af979d..5eedfbb0be8a4 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -762,7 +762,7 @@ static void pci_pm_complete(struct device *dev)
 
 #endif /* !CONFIG_PM_SLEEP */
 
-#if defined(CONFIG_SUSPEND)
+#if defined(CONFIG_SUSPEND) || defined(CONFIG_HIBERNATE_CALLBACKS)
 /**
  * pci_pm_suspend_noirq_common
  * @pci_dev: pci device
@@ -808,7 +808,7 @@ static void pci_pm_suspend_noirq_common(struct pci_dev *pci_dev, bool *skip_bus_
 
 	pci_pm_set_unknown_state(pci_dev);
 }
-#endif /* CONFIG_SUSPEND */
+#endif /* CONFIG_SUSPEND || CONFIG_HIBERNATE_CALLBACKS */
 
 #ifdef CONFIG_SUSPEND
 static void pcie_pme_root_status_cleanup(struct pci_dev *pci_dev)
@@ -1164,6 +1164,8 @@ static int pci_pm_poweroff(struct device *dev)
 	    (system_state == SYSTEM_HALT || system_state == SYSTEM_POWER_OFF))
 		device_set_wakeup_enable(dev, false);
 
+	pci_dev->skip_bus_pm = false;
+
 	if (pci_has_legacy_pm_support(pci_dev))
 		return pci_legacy_suspend(dev, PMSG_HIBERNATE);
 
@@ -1206,6 +1208,7 @@ static int pci_pm_poweroff_noirq(struct device *dev)
 {
 	struct pci_dev *pci_dev = to_pci_dev(dev);
 	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+	bool skip_bus_pm = false;
 
 	if (dev_pm_skip_suspend(dev))
 		return 0;
@@ -1227,8 +1230,9 @@ static int pci_pm_poweroff_noirq(struct device *dev)
 			return error;
 	}
 
-	if (!pci_dev->state_saved && pci_power_manageable(pci_dev))
-		pci_prepare_to_sleep(pci_dev);
+	pci_pm_suspend_noirq_common(pci_dev, &skip_bus_pm);
+	if (skip_bus_pm)
+		goto Fixup;
 
 	/*
 	 * The reason for doing this here is the same as for the analogous code
@@ -1237,6 +1241,7 @@ static int pci_pm_poweroff_noirq(struct device *dev)
 	if (pci_dev->class == PCI_CLASS_SERIAL_USB_EHCI)
 		pci_write_config_word(pci_dev, PCI_COMMAND, 0);
 
+Fixup:
 	pci_fixup_device(pci_fixup_suspend_late, pci_dev);
 
 	return 0;
-- 
2.43.0

[PATCH v5 10/11] drm/amd: Avoid evicting resources at S5

[Mario Limonciello (AMD)]

Normally resources are evicted on dGPUs at suspend or hibernate and
on APUs at hibernate.  These steps are unnecessary when using the S4
callbacks to put the system into S5.

Cc: AceLan Kao <acelan.kao@canonical.com>
Cc: Kai-Heng Feng <kaihengf@nvidia.com>
Cc: Mark Pearson <mpearson-lenovo@squebb.ca>
Cc: Denis Benato <benato.denis96@gmail.com>
Cc: Merthan Karakaş <m3rthn.k@gmail.com>
Tested-by: Eric Naim <dnaim@cachyos.org>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
---
v5:
 * No changes
v4:
 * Add A-b tag for Alex
 * https://lore.kernel.org/linux-pci/20250616175019.3471583-1-superm1@kernel.org/
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
index f9b4c4321f67c..4e4b7a63cc61e 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
@@ -5017,6 +5017,10 @@ static int amdgpu_device_evict_resources(struct amdgpu_device *adev)
 	if (!adev->in_s4 && (adev->flags & AMD_IS_APU))
 		return 0;
 
+	/* No need to evict when going to S5 through S4 callbacks */
+	if (system_state == SYSTEM_HALT || system_state == SYSTEM_POWER_OFF)
+		return 0;
+
 	ret = amdgpu_ttm_evict_resources(adev, TTM_PL_VRAM);
 	if (ret) {
 		dev_warn(adev->dev, "evicting device resources failed\n");
-- 
2.43.0

[PATCH v5 11/11] PM: Use hibernate flows for system power off

[Mario Limonciello (AMD)]

When the system is powered off the kernel will call device_shutdown()
which will issue callbacks into PCI core to wake up a device and call
it's shutdown() callback.  This will leave devices in ACPI D0 which can
cause some devices to misbehave with spurious wakeups and also leave some
devices on which will consume power needlessly.

The issue won't happen if the device is in D3 before system shutdown, so
putting device to low power state before shutdown solves the issue.

ACPI Spec 6.5, "7.4.2.5 System \_S4 State" says "Devices states are
compatible with the current Power Resource states. In other words, all
devices are in the D3 state when the system state is S4."

The following "7.4.2.6 System \_S5 State (Soft Off)" states "The S5
state is similar to the S4 state except that OSPM does not save any
context." so it's safe to assume devices should be at D3 for S5.

To accomplish this, use the PMSG_POWEROFF event to call all the device
hibernate callbacks when the kernel is compiled with hibernate support.
If compiled without hibernate support or hibernate fails fall back into
the previous shutdown flow.

Cc: AceLan Kao <acelan.kao@canonical.com>
Cc: Kai-Heng Feng <kaihengf@nvidia.com>
Cc: Mark Pearson <mpearson-lenovo@squebb.ca>
Cc: Merthan Karakaş <m3rthn.k@gmail.com>
Tested-by: Eric Naim <dnaim@cachyos.org>
Tested-by: Denis Benato <benato.denis96@gmail.com>
Link: https://lore.kernel.org/linux-pci/20231213182656.6165-1-mario.limonciello@amd.com/
Link: https://lore.kernel.org/linux-pci/20250506041934.1409302-1-superm1@kernel.org/
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
---
v5:
 * split to multiple commits, re-order
v4:
 * https://lore.kernel.org/linux-pci/20250616175019.3471583-1-superm1@kernel.org/
v3:
 * Add new PMSG_POWEROFF and PM_EVENT_POWEROFF which alias to poweroff
   callbacks
 * Don't try to cleanup on dpm_suspend_start() or dpm_suspend_end() failures
   Jump right into normal shutdown flow instead.
 * https://lore.kernel.org/linux-pm/20250609024619.407257-1-superm1@kernel.org/T/#me6db0fb946e3d604a8f3d455128844ed802c82bb
---
 kernel/reboot.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/kernel/reboot.c b/kernel/reboot.c
index ec087827c85cd..c8835f8e5f271 100644
--- a/kernel/reboot.c
+++ b/kernel/reboot.c
@@ -13,6 +13,7 @@
 #include <linux/kexec.h>
 #include <linux/kmod.h>
 #include <linux/kmsg_dump.h>
+#include <linux/pm.h>
 #include <linux/reboot.h>
 #include <linux/suspend.h>
 #include <linux/syscalls.h>
@@ -305,6 +306,11 @@ static void kernel_shutdown_prepare(enum system_states state)
 		(state == SYSTEM_HALT) ? SYS_HALT : SYS_POWER_OFF, NULL);
 	system_state = state;
 	usermodehelper_disable();
+#ifdef CONFIG_HIBERNATE_CALLBACKS
+	if (!dpm_suspend_start(PMSG_POWEROFF) && !dpm_suspend_end(PMSG_POWEROFF))
+		return;
+	pr_emerg("Failed to power off devices, using shutdown instead.\n");
+#endif
 	device_shutdown();
 }
 /**
-- 
2.43.0

Re: [PATCH v5 04/11] USB: Pass PMSG_POWEROFF event to suspend_common() for poweroff with S4 flow

[kernel test robot]

Hi Mario,

kernel test robot noticed the following build errors:

[auto build test ERROR on 8f5ae30d69d7543eee0d70083daf4de8fe15d585]

url:    https://github.com/intel-lab-lkp/linux/commits/Mario-Limonciello-AMD/PM-Introduce-new-PMSG_POWEROFF-event/20250812-034228
base:   8f5ae30d69d7543eee0d70083daf4de8fe15d585
patch link:    https://lore.kernel.org/r/20250811194102.864225-5-superm1%40kernel.org
patch subject: [PATCH v5 04/11] USB: Pass PMSG_POWEROFF event to suspend_common() for poweroff with S4 flow
config: i386-randconfig-013-20250812 (https://download.01.org/0day-ci/archive/20250813/202508130049.aA2DXgHW-lkp@intel.com/config)
compiler: gcc-12 (Debian 12.2.0-14+deb12u1) 12.2.0
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20250813/202508130049.aA2DXgHW-lkp@intel.com/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202508130049.aA2DXgHW-lkp@intel.com/

All errors (new ones prefixed by >>):

>> drivers/usb/core/hcd-pci.c:650:27: error: 'hcd_pci_poweroff' undeclared here (not in a function); did you mean 'hcd_pci_poweroff_late'?
     650 |         .poweroff       = hcd_pci_poweroff,
         |                           ^~~~~~~~~~~~~~~~
         |                           hcd_pci_poweroff_late


vim +650 drivers/usb/core/hcd-pci.c

   640	
   641	const struct dev_pm_ops usb_hcd_pci_pm_ops = {
   642		.suspend	= hcd_pci_suspend,
   643		.suspend_noirq	= hcd_pci_suspend_noirq,
   644		.resume_noirq	= hcd_pci_resume_noirq,
   645		.resume		= hcd_pci_resume,
   646		.freeze		= hcd_pci_freeze,
   647		.freeze_noirq	= check_root_hub_suspended,
   648		.thaw_noirq	= NULL,
   649		.thaw		= hcd_pci_resume,
 > 650		.poweroff	= hcd_pci_poweroff,
   651		.poweroff_late	= hcd_pci_poweroff_late,
   652		.poweroff_noirq	= hcd_pci_suspend_noirq,
   653		.restore_noirq	= hcd_pci_resume_noirq,
   654		.restore	= hcd_pci_restore,
   655		.runtime_suspend = hcd_pci_runtime_suspend,
   656		.runtime_resume	= hcd_pci_runtime_resume,
   657	};
   658	EXPORT_SYMBOL_GPL(usb_hcd_pci_pm_ops);
   659	

-- 
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki