From: Jonathan Kim <jonathan.kim@amd.com>
To: <amd-gfx@lists.freedesktop.org>
Cc: <Alexander.Deucher@amd.com>, <alexdeucher@gmail.com>,
Jonathan Kim <jonathan.kim@amd.com>
Subject: [PATCH 2/3] drm/amdgpu: fix hung reset queue array memory allocation
Date: Fri, 10 Oct 2025 12:33:13 -0400 [thread overview]
Message-ID: <20251010163314.1105768-2-jonathan.kim@amd.com> (raw)
In-Reply-To: <20251010163314.1105768-1-jonathan.kim@amd.com>
By design the MES will return an array result that is twice the number
of hung doorbells it can report.
i.e. if up k reported doorbells are supported, then the
second half of the array, also of length k, holds the HQD information
(type/queue/pipe) where queue 1 corresponds to index 0 and k,
queue 2 corresponds to index 1 and k + 1 etc ...
The driver will use the HDQ info to target queue/pipe reset for
hardware scheduled user compute queues.
v2: only extend memory to accommodate HQD info for now as it will
be used later.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c | 7 ++++++-
drivers/gpu/drm/amd/amdgpu/amdgpu_mes.h | 1 +
drivers/gpu/drm/amd/amdgpu/mes_userqueue.c | 6 +++---
drivers/gpu/drm/amd/amdgpu/mes_v11_0.c | 8 +++++---
drivers/gpu/drm/amd/amdgpu/mes_v12_0.c | 8 +++++---
5 files changed, 20 insertions(+), 10 deletions(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c
index 01ac942c1bb1..45bf8309cb37 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c
@@ -420,12 +420,17 @@ int amdgpu_mes_detect_and_reset_hung_queues(struct amdgpu_device *adev,
dev_err(adev->dev, "failed to detect and reset\n");
} else {
*hung_db_num = 0;
- for (i = 0; i < adev->mes.hung_queue_db_array_size; i++) {
+ for (i = 0; i < adev->mes.hung_queue_hqd_info_offset; i++) {
if (db_array[i] != AMDGPU_MES_INVALID_DB_OFFSET) {
hung_db_array[i] = db_array[i];
*hung_db_num += 1;
}
}
+
+ /*
+ * TODO: return HQD info for MES scheduled user compute queue reset cases
+ * stored in hung_db_array hqd info offset to full array size
+ */
}
return r;
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_mes.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_mes.h
index 6b506fc72f58..97c137c90f97 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_mes.h
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_mes.h
@@ -149,6 +149,7 @@ struct amdgpu_mes {
void *resource_1_addr[AMDGPU_MAX_MES_PIPES];
int hung_queue_db_array_size;
+ int hung_queue_hqd_info_offset;
struct amdgpu_bo *hung_queue_db_array_gpu_obj;
uint64_t hung_queue_db_array_gpu_addr;
void *hung_queue_db_array_cpu_addr;
diff --git a/drivers/gpu/drm/amd/amdgpu/mes_userqueue.c b/drivers/gpu/drm/amd/amdgpu/mes_userqueue.c
index 829129ad7bd1..5c63480dda9c 100644
--- a/drivers/gpu/drm/amd/amdgpu/mes_userqueue.c
+++ b/drivers/gpu/drm/amd/amdgpu/mes_userqueue.c
@@ -208,10 +208,10 @@ static int mes_userq_detect_and_reset(struct amdgpu_device *adev,
struct amdgpu_userq_mgr *uqm, *tmp;
unsigned int hung_db_num = 0;
int queue_id, r, i;
- u32 db_array[4];
+ u32 db_array[8];
- if (db_array_size > 4) {
- dev_err(adev->dev, "DB array size (%d vs 4) too small\n",
+ if (db_array_size > 8) {
+ dev_err(adev->dev, "DB array size (%d vs 8) too small\n",
db_array_size);
return -EINVAL;
}
diff --git a/drivers/gpu/drm/amd/amdgpu/mes_v11_0.c b/drivers/gpu/drm/amd/amdgpu/mes_v11_0.c
index e82188431f79..da575bb1377f 100644
--- a/drivers/gpu/drm/amd/amdgpu/mes_v11_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/mes_v11_0.c
@@ -66,7 +66,8 @@ static int mes_v11_0_kiq_hw_fini(struct amdgpu_device *adev);
#define GFX_MES_DRAM_SIZE 0x80000
#define MES11_HW_RESOURCE_1_SIZE (128 * AMDGPU_GPU_PAGE_SIZE)
-#define MES11_HUNG_DB_OFFSET_ARRAY_SIZE 4
+#define MES11_HUNG_DB_OFFSET_ARRAY_SIZE 8 /* [0:3] = db offset, [4:7] = hqd info */
+#define MES11_HUNG_HQD_INFO_OFFSET 4
static void mes_v11_0_ring_set_wptr(struct amdgpu_ring *ring)
{
@@ -1720,8 +1721,9 @@ static int mes_v11_0_early_init(struct amdgpu_ip_block *ip_block)
struct amdgpu_device *adev = ip_block->adev;
int pipe, r;
- adev->mes.hung_queue_db_array_size =
- MES11_HUNG_DB_OFFSET_ARRAY_SIZE;
+ adev->mes.hung_queue_db_array_size = MES11_HUNG_DB_OFFSET_ARRAY_SIZE;
+ adev->mes.hung_queue_hqd_info_offset = MES11_HUNG_HQD_INFO_OFFSET;
+
for (pipe = 0; pipe < AMDGPU_MAX_MES_PIPES; pipe++) {
if (!adev->enable_mes_kiq && pipe == AMDGPU_MES_KIQ_PIPE)
continue;
diff --git a/drivers/gpu/drm/amd/amdgpu/mes_v12_0.c b/drivers/gpu/drm/amd/amdgpu/mes_v12_0.c
index e3149196143e..7f3512d9de07 100644
--- a/drivers/gpu/drm/amd/amdgpu/mes_v12_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/mes_v12_0.c
@@ -47,7 +47,8 @@ static int mes_v12_0_kiq_hw_fini(struct amdgpu_device *adev);
#define MES_EOP_SIZE 2048
-#define MES12_HUNG_DB_OFFSET_ARRAY_SIZE 4
+#define MES12_HUNG_DB_OFFSET_ARRAY_SIZE 8 /* [0:3] = db offset [4:7] hqd info */
+#define MES12_HUNG_HQD_INFO_OFFSET 4
static void mes_v12_0_ring_set_wptr(struct amdgpu_ring *ring)
{
@@ -1904,8 +1905,9 @@ static int mes_v12_0_early_init(struct amdgpu_ip_block *ip_block)
struct amdgpu_device *adev = ip_block->adev;
int pipe, r;
- adev->mes.hung_queue_db_array_size =
- MES12_HUNG_DB_OFFSET_ARRAY_SIZE;
+ adev->mes.hung_queue_db_array_size = MES12_HUNG_DB_OFFSET_ARRAY_SIZE;
+ adev->mes.hung_queue_hqd_info_offset = MES12_HUNG_HQD_INFO_OFFSET;
+
for (pipe = 0; pipe < AMDGPU_MAX_MES_PIPES; pipe++) {
r = amdgpu_mes_init_microcode(adev, pipe);
if (r)
--
2.34.1
next prev parent reply other threads:[~2025-10-10 16:33 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-10 16:33 [PATCH 1/3] drm/amdgpu: fix gfx12 mes packet status return check Jonathan Kim
2025-10-10 16:33 ` Jonathan Kim [this message]
2025-10-10 16:33 ` [PATCH 3/3] drm/amdgpu: update remove after reset flag for MES remove queue Jonathan Kim
2025-10-10 17:28 ` [PATCH 1/3] drm/amdgpu: fix gfx12 mes packet status return check Alex Deucher
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251010163314.1105768-2-jonathan.kim@amd.com \
--to=jonathan.kim@amd.com \
--cc=Alexander.Deucher@amd.com \
--cc=alexdeucher@gmail.com \
--cc=amd-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox