[PATCH] drm/amd/display: fix wrong color value mapping on MCM shaper LUT

[Melissa Wen <mwen@igalia.com>]

Some shimmer/colorful points appears when using the steamOS color
pipeline for HDR on gaming with DCN32. These points look like black
values being wrongly mapped to red/blue/green values. It was caused
because the number of hw points in regular LUTs and in a shaper LUT was
treated as the same.

DCN3+ regular LUTs have 257 bases and implicit deltas (i.e. HW
calculates them), but shaper LUT is a special case: it has 256 bases and
256 deltas, as in DCN1-2 regular LUTs, and outputs 14-bit values.

Fix that by setting by decreasing in 1 the number of HW points computed
in the LUT segmentation so that shaper LUT (i.e. fixpoint == true) keeps
the same DCN10 CM logic and regular LUTs go with `hw_points + 1`.

CC: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Fixes: 4d5fd3d08ea9 ("drm/amd/display: PQ tail accuracy")
Signed-off-by: Melissa Wen <mwen@igalia.com>
---
 drivers/gpu/drm/amd/display/dc/dcn30/dcn30_cm_common.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_cm_common.c b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_cm_common.c
index 0690c346f2c5..a4f14b16564c 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_cm_common.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_cm_common.c
@@ -163,6 +163,11 @@ bool cm3_helper_translate_curve_to_hw_format(
 			hw_points += (1 << seg_distr[k]);
 	}
 
+	// DCN3+ have 257 pts in lieu of no separate slope registers
+	// Prior HW had 256 base+slope pairs
+	// Shaper LUT (i.e. fixpoint == true) is still 256 bases and 256 deltas
+	hw_points = fixpoint ? (hw_points - 1) : hw_points;
+
 	j = 0;
 	for (k = 0; k < (region_end - region_start); k++) {
 		increment = NUMBER_SW_SEGMENTS / (1 << seg_distr[k]);
@@ -223,8 +228,6 @@ bool cm3_helper_translate_curve_to_hw_format(
 	corner_points[1].green.slope = dc_fixpt_zero;
 	corner_points[1].blue.slope = dc_fixpt_zero;
 
-	// DCN3+ have 257 pts in lieu of no separate slope registers
-	// Prior HW had 256 base+slope pairs
 	lut_params->hw_points_num = hw_points + 1;
 
 	k = 0;
-- 
2.51.0