[PATCH 5/8] drm/amd/display: Initialize DAC in DCE link encoder using VBIOS

["Timur Kristóf" <timur.kristof@gmail.com>]

The VBIOS DAC1EncoderControl() function can initialize the DAC,
by writing board-specific values to certain registers.
Call this at link encoder hardware initialization time similarly
to how the equivalent UNIPHYTransmitterControl initialization
is done.

This fixes DAC output on the Radeon HD 7790.

Also remove the ENCODER_CONTROL_SETUP enum from the
dac_encoder_control_prepare_params function which is actually
not a supported operation for DAC encoders.

Fixes: 0fbe321a93ce ("drm/amd/display: Implement DCE analog link encoders (v2)")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Tested-by: Mauro Rossi <issor.oruam@gmail.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
---
 drivers/gpu/drm/amd/display/dc/bios/command_table.c   |  3 +--
 drivers/gpu/drm/amd/display/dc/dce/dce_link_encoder.c | 10 ++++++++++
 2 files changed, 11 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/bios/command_table.c b/drivers/gpu/drm/amd/display/dc/bios/command_table.c
index 76a3559f0ddc..b692fa37402d 100644
--- a/drivers/gpu/drm/amd/display/dc/bios/command_table.c
+++ b/drivers/gpu/drm/amd/display/dc/bios/command_table.c
@@ -1874,8 +1874,7 @@ static void dac_encoder_control_prepare_params(
 	uint8_t dac_standard)
 {
 	params->ucDacStandard = dac_standard;
-	if (action == ENCODER_CONTROL_SETUP ||
-	    action == ENCODER_CONTROL_INIT)
+	if (action == ENCODER_CONTROL_INIT)
 		params->ucAction = ATOM_ENCODER_INIT;
 	else if (action == ENCODER_CONTROL_ENABLE)
 		params->ucAction = ATOM_ENABLE;
diff --git a/drivers/gpu/drm/amd/display/dc/dce/dce_link_encoder.c b/drivers/gpu/drm/amd/display/dc/dce/dce_link_encoder.c
index f8fcf8d1a4dd..8903bdb89c66 100644
--- a/drivers/gpu/drm/amd/display/dc/dce/dce_link_encoder.c
+++ b/drivers/gpu/drm/amd/display/dc/dce/dce_link_encoder.c
@@ -1036,6 +1036,16 @@ void dce110_link_encoder_hw_init(
 	cntl.coherent = false;
 	cntl.hpd_sel = enc110->base.hpd_source;
 
+	if (enc110->base.analog_engine != ENGINE_ID_UNKNOWN) {
+		result = link_dac_encoder_control(enc110, ENCODER_CONTROL_INIT, 0);
+		if (result != BP_RESULT_OK) {
+			DC_LOG_ERROR("%s: Failed to execute VBIOS command table for DAC!\n",
+				__func__);
+			BREAK_TO_DEBUGGER();
+			return;
+		}
+	}
+
 	/* The code below is only applicable to encoders with a digital transmitter. */
 	if (enc110->base.transmitter == TRANSMITTER_UNKNOWN)
 		return;
-- 
2.52.0