From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: dri-devel@lists.freedesktop.org
Cc: Alexander.Deucher@amd.com, daniel.vetter@intel.com,
amd-gfx@lists.freedesktop.org, nouveau@lists.freedesktop.org
Subject: Re: [PATCH 3/4] drm/amd/display: Switch to using atomic_helper for flip.
Date: Tue, 17 Jan 2017 00:16:45 +0200 [thread overview]
Message-ID: <2158092.LKM1DbUVy7@avalon> (raw)
In-Reply-To: <1484581498-32309-4-git-send-email-Andrey.Grodzovsky@amd.com>
Hi Andrey,
Thank you for the patch.
On Monday 16 Jan 2017 10:44:57 Andrey Grodzovsky wrote:
> Change-Id: Iad3e0b9b3546e4e4dc79be9233daf4fe4dba83e0
> Signed-off-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
> ---
> .../drm/amd/display/amdgpu_dm/amdgpu_dm_types.c | 92 ++----------------
> 1 file changed, 6 insertions(+), 86 deletions(-)
>
> diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_types.c
> b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_types.c index
> a443b70..d4664bf 100644
> --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_types.c
> +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_types.c
> @@ -1060,83 +1060,6 @@ static int dm_crtc_funcs_atomic_set_property(
> return 0;
> }
>
> -
> -static int amdgpu_atomic_helper_page_flip(struct drm_crtc *crtc,
> - struct drm_framebuffer *fb,
> - struct drm_pending_vblank_event *event,
> - uint32_t flags)
> -{
> - struct drm_plane *plane = crtc->primary;
> - struct amdgpu_crtc *acrtc = to_amdgpu_crtc(crtc);
> - struct drm_atomic_state *state;
> - struct drm_plane_state *plane_state;
> - struct drm_crtc_state *crtc_state;
> - int ret = 0;
> -
> - state = drm_atomic_state_alloc(plane->dev);
> - if (!state)
> - return -ENOMEM;
> -
> - ret = drm_crtc_vblank_get(crtc);
The DRM core's atomic page flip helper doesn't get/put vblank. Have you
double-checked that removing them isn't a problem ?
> - if (ret)
> - return ret;
> -
> - state->acquire_ctx = drm_modeset_legacy_acquire_ctx(crtc);
> -retry:
> - crtc_state = drm_atomic_get_crtc_state(state, crtc);
> - if (IS_ERR(crtc_state)) {
> - ret = PTR_ERR(crtc_state);
> - goto fail;
> - }
> - crtc_state->event = event;
> -
> - plane_state = drm_atomic_get_plane_state(state, plane);
> - if (IS_ERR(plane_state)) {
> - ret = PTR_ERR(plane_state);
> - goto fail;
> - }
> -
> - ret = drm_atomic_set_crtc_for_plane(plane_state, crtc);
> - if (ret != 0)
> - goto fail;
> - drm_atomic_set_fb_for_plane(plane_state, fb);
> -
> - /* Make sure we don't accidentally do a full modeset. */
> - state->allow_modeset = false;
> - if (!crtc_state->active) {
> - DRM_DEBUG_ATOMIC("[CRTC:%d] disabled, rejecting legacy
flip\n",
> - crtc->base.id);
> - ret = -EINVAL;
> - goto fail;
> - }
> - acrtc->flip_flags = flags;
> -
> - ret = drm_atomic_nonblocking_commit(state);
> -
> -fail:
> - if (ret == -EDEADLK)
> - goto backoff;
> -
> - if (ret)
> - drm_crtc_vblank_put(crtc);
> -
> - drm_atomic_state_put(state);
> -
> - return ret;
> -backoff:
> - drm_atomic_state_clear(state);
> - drm_atomic_legacy_backoff(state);
> -
> - /*
> - * Someone might have exchanged the framebuffer while we dropped locks
> - * in the backoff code. We need to fix up the fb refcount tracking the
> - * core does for us.
> - */
> - plane->old_fb = plane->fb;
> -
> - goto retry;
> -}
> -
> /* Implemented only the options currently availible for the driver */
> static const struct drm_crtc_funcs amdgpu_dm_crtc_funcs = {
> .reset = drm_atomic_helper_crtc_reset,
> @@ -1145,7 +1068,7 @@ static int amdgpu_atomic_helper_page_flip(struct
> drm_crtc *crtc, .destroy = amdgpu_dm_crtc_destroy,
> .gamma_set = amdgpu_dm_atomic_crtc_gamma_set,
> .set_config = drm_atomic_helper_set_config,
> - .page_flip = amdgpu_atomic_helper_page_flip,
> + .page_flip_target = drm_atomic_helper_page_flip_target,
> .atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state,
> .atomic_destroy_state = drm_atomic_helper_crtc_destroy_state,
> .atomic_set_property = dm_crtc_funcs_atomic_set_property
> @@ -1679,7 +1602,7 @@ static bool page_flip_needed(
> sizeof(old_state_tmp)) == 0 ? true:false;
> if (new_state->crtc && page_flip_required == false) {
> acrtc_new = to_amdgpu_crtc(new_state->crtc);
> - if (acrtc_new->flip_flags & DRM_MODE_PAGE_FLIP_ASYNC)
> + if (new_state->pflip_flags & DRM_MODE_PAGE_FLIP_ASYNC)
> page_flip_required = true;
> }
> return page_flip_required;
> @@ -2760,7 +2683,6 @@ int amdgpu_dm_atomic_commit(
> for_each_plane_in_state(state, plane, old_plane_state, i) {
> struct drm_plane_state *plane_state = plane->state;
> struct drm_crtc *crtc = plane_state->crtc;
> - struct amdgpu_crtc *acrtc = to_amdgpu_crtc(crtc);
> struct drm_framebuffer *fb = plane_state->fb;
>
> if (!fb || !crtc || !crtc->state->planes_changed ||
> @@ -2771,10 +2693,9 @@ int amdgpu_dm_atomic_commit(
> ret = amdgpu_crtc_page_flip_target(crtc,
> fb,
> crtc->state->event,
> - acrtc->flip_flags,
> -
drm_crtc_vblank_count(crtc));
> - /*clean up the flags for next usage*/
> - acrtc->flip_flags = 0;
> + plane_state-
>pflip_flags,
> + crtc->state-
>target_vblank);
> +
> if (ret)
> break;
> }
> @@ -3143,8 +3064,7 @@ int amdgpu_dm_atomic_check(struct drm_device *dev,
> * 1. This commit is not a page flip.
> * 2. This commit is a page flip, and targets are
created.
> */
> - if (!page_flip_needed(plane_state, old_plane_state,
> - true) ||
> + if (!page_flip_needed(plane_state, old_plane_state,
true) ||
This seems to be an unrelated change.
> action == DM_COMMIT_ACTION_DPMS_ON ||
> action == DM_COMMIT_ACTION_SET) {
> struct dc_surface *surface;
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2017-01-16 22:16 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-16 15:44 [PATCH 0/4] Allow ASYNC flip with atomic helpers Andrey Grodzovsky
2017-01-16 15:44 ` [PATCH 1/4] drm/atomic: Save flip flags in drm_plane_state Andrey Grodzovsky
[not found] ` <1484581498-32309-2-git-send-email-Andrey.Grodzovsky-5C7GfCeVMHo@public.gmane.org>
2017-01-16 20:21 ` Gustavo Padovan
2017-01-16 20:53 ` Grodzovsky, Andrey
2017-01-23 8:54 ` Daniel Vetter
2017-01-23 19:48 ` Cheng, Tony
[not found] ` <MWHPR12MB14066404FBCEF3C03EF24BF998720-Gy0DoCVfaSXS1+HfpYZxvgdYzm3356FpvxpqHgZTriW3zl9H0oFU5g@public.gmane.org>
2017-01-26 5:01 ` Grodzovsky, Andrey
[not found] ` <DM5PR12MB1147AEF3F8CFFAD4B69E114EEA770-2J9CzHegvk9IwjGPM8RDJwdYzm3356FpvxpqHgZTriW3zl9H0oFU5g@public.gmane.org>
2017-01-26 9:40 ` Daniel Vetter
2017-01-26 9:39 ` Daniel Vetter
2017-01-16 22:18 ` Laurent Pinchart
2017-01-17 4:03 ` Grodzovsky, Andrey
[not found] ` <DM5PR12MB1147FF9E484370F1572CB9C3EA7C0-2J9CzHegvk9IwjGPM8RDJwdYzm3356FpvxpqHgZTriW3zl9H0oFU5g@public.gmane.org>
2017-01-17 9:03 ` Laurent Pinchart
2017-01-17 8:14 ` Ville Syrjälä
[not found] ` <1484581498-32309-1-git-send-email-Andrey.Grodzovsky-5C7GfCeVMHo@public.gmane.org>
2017-01-16 15:44 ` [PATCH 2/4] drm/amdgpu: Remove flip_flag from amdgpu_crtc Andrey Grodzovsky
2017-01-16 22:15 ` Laurent Pinchart
2017-01-16 15:44 ` [PATCH 3/4] drm/amd/display: Switch to using atomic_helper for flip Andrey Grodzovsky
2017-01-16 22:16 ` Laurent Pinchart [this message]
2017-01-18 1:50 ` Michel Dänzer
2017-01-18 12:02 ` Laurent Pinchart
2017-01-18 22:18 ` Grodzovsky, Andrey
[not found] ` <DM5PR12MB1147CFCD90203061E0F2EB95EA7F0-2J9CzHegvk9IwjGPM8RDJwdYzm3356FpvxpqHgZTriW3zl9H0oFU5g@public.gmane.org>
2017-01-19 2:14 ` Michel Dänzer
2017-01-19 4:57 ` [PATCH v3 2/3] " Andrey Grodzovsky
2017-01-16 15:44 ` [PATCH 4/4] drm/nouveau/kms/nv50: Switch to using atomic helper " Andrey Grodzovsky
2017-01-16 20:39 ` [PATCH 0/4] Allow ASYNC flip with atomic helpers Laurent Pinchart
2017-01-16 21:13 ` Harry Wentland
2017-01-16 22:14 ` Laurent Pinchart
2017-01-23 8:53 ` Daniel Vetter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2158092.LKM1DbUVy7@avalon \
--to=laurent.pinchart@ideasonboard.com \
--cc=Alexander.Deucher@amd.com \
--cc=amd-gfx@lists.freedesktop.org \
--cc=daniel.vetter@intel.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=nouveau@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox