From: "Lazar, Lijo" <lijo.lazar@amd.com>
To: "Srinivasan Shanmugam" <srinivasan.shanmugam@amd.com>,
"Christian König" <christian.koenig@amd.com>,
"Alex Deucher" <alexander.deucher@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Subject: Re: [PATCH] drm/amdgpu: Fix 'fw_name' buffer size to prevent truncations in amdgpu_mes_init_microcode
Date: Thu, 21 Mar 2024 13:47:09 +0530 [thread overview]
Message-ID: <533c79d9-cabe-4fb2-afb2-561aae7b8530@amd.com> (raw)
In-Reply-To: <20240321054647.3625987-1-srinivasan.shanmugam@amd.com>
On 3/21/2024 11:16 AM, Srinivasan Shanmugam wrote:
> The snprintf function is used to write a formatted string into fw_name.
> The format of the string is "amdgpu/%s_mes%s.bin", where %s is replaced
> by the string in ucode_prefix and the second %s is replaced by either
> "_2" or "1" depending on the condition pipe == AMDGPU_MES_SCHED_PIPE.
>
> The length of the string "amdgpu/%s_mes%s.bin" is 16 characters plus the
> length of ucode_prefix and the length of the string "_2" or "1". The
> size of ucode_prefix is 30, so the maximum length of ucode_prefix is 29
> characters (since one character is needed for the null terminator).
> Therefore, the maximum possible length of the string written into
> fw_name is 16 + 29 + 2 = 47 characters.
>
> The size of fw_name is 40, so if the length of the string written into
> fw_name is more than 39 characters (since one character is needed for
> the null terminator), it will be truncated by the snprintf function, and
> thus warnings will be seen.
>
> By increasing the size of fw_name to 50, we ensure that fw_name is
> large enough to hold the maximum possible length of the string, so the
> snprintf function will not truncate the output.
>
> Fixes the below with gcc W=1:
> drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c: In function ‘amdgpu_mes_init_microcode’:
> drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c:1482:66: warning: ‘%s’ directive output may be truncated writing up to 1 bytes into a region of size between 0 and 29 [-Wformat-truncation=]
> 1482 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mes%s.bin",
> | ^~
> drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c:1482:17: note: ‘snprintf’ output between 16 and 46 bytes into a destination of size 40
> 1482 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mes%s.bin",
> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> 1483 | ucode_prefix,
> | ~~~~~~~~~~~~~
> 1484 | pipe == AMDGPU_MES_SCHED_PIPE ? "" : "1");
> | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c:1477:66: warning: ‘%s’ directive output may be truncated writing 1 byte into a region of size between 0 and 29 [-Wformat-truncation=]
> 1477 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mes%s.bin",
> | ^~
> 1478 | ucode_prefix,
> 1479 | pipe == AMDGPU_MES_SCHED_PIPE ? "_2" : "1");
> | ~~~
> drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c:1477:17: note: ‘snprintf’ output between 17 and 46 bytes into a destination of size 40
> 1477 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mes%s.bin",
> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> 1478 | ucode_prefix,
> | ~~~~~~~~~~~~~
> 1479 | pipe == AMDGPU_MES_SCHED_PIPE ? "_2" : "1");
> | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c:1477:66: warning: ‘%s’ directive output may be truncated writing 2 bytes into a region of size between 0 and 29 [-Wformat-truncation=]
> 1477 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mes%s.bin",
> | ^~
> 1478 | ucode_prefix,
> 1479 | pipe == AMDGPU_MES_SCHED_PIPE ? "_2" : "1");
> | ~~~~
> drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c:1477:17: note: ‘snprintf’ output between 18 and 47 bytes into a destination of size 40
> 1477 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mes%s.bin",
> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> 1478 | ucode_prefix,
> | ~~~~~~~~~~~~~
> 1479 | pipe == AMDGPU_MES_SCHED_PIPE ? "_2" : "1");
> | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c:1489:62: warning: ‘_mes.bin’ directive output may be truncated writing 8 bytes into a region of size between 4 and 33 [-Wformat-truncation=]
> 1489 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mes.bin",
> | ^~~~~~~~
> drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c:1489:17: note: ‘snprintf’ output between 16 and 45 bytes into a destination of size 40
> 1489 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mes.bin",
> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> 1490 | ucode_prefix);
> | ~~~~~~~~~~~~~
>
> Cc: Alex Deucher <alexander.deucher@amd.com>
> Cc: Christian König <christian.koenig@amd.com>
> Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Thanks,
Lijo
> ---
> drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c
> index bc8906403270..78dfd027dc99 100644
> --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c
> +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c
> @@ -1467,7 +1467,7 @@ int amdgpu_mes_init_microcode(struct amdgpu_device *adev, int pipe)
> const struct mes_firmware_header_v1_0 *mes_hdr;
> struct amdgpu_firmware_info *info;
> char ucode_prefix[30];
> - char fw_name[40];
> + char fw_name[50];
> bool need_retry = false;
> int r;
>
prev parent reply other threads:[~2024-03-21 8:17 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-03-21 5:46 [PATCH] drm/amdgpu: Fix 'fw_name' buffer size to prevent truncations in amdgpu_mes_init_microcode Srinivasan Shanmugam
2024-03-21 8:17 ` Lazar, Lijo [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=533c79d9-cabe-4fb2-afb2-561aae7b8530@amd.com \
--to=lijo.lazar@amd.com \
--cc=alexander.deucher@amd.com \
--cc=amd-gfx@lists.freedesktop.org \
--cc=christian.koenig@amd.com \
--cc=srinivasan.shanmugam@amd.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox