From: Aurabindo Pillai <aurabindo.pillai@amd.com>
To: Shashank Sharma <shashank.sharma@amd.com>,
amd-gfx@lists.freedesktop.org, dri-devel@lists.freedesktop.org
Cc: alexander.deucher@amd.com, Harry.Wentland@amd.com,
nicholas.kazlauskas@amd.com
Subject: Re: [PATCH v3 2/3] drm/amd/display: Add freesync video modes based on preferred modes
Date: Tue, 15 Dec 2020 09:14:17 -0500 [thread overview]
Message-ID: <7d0ea3e95605c8ea8fcc0ca5006ba8565dafdb16.camel@amd.com> (raw)
In-Reply-To: <d3bb5e86-592b-98d8-11cb-cf6b719d0ee3@amd.com>
On Tue, 2020-12-15 at 08:32 +0530, Shashank Sharma wrote:
>
> On 15/12/20 3:50 am, Aurabindo Pillai wrote:
> > [Why&How]
> > If experimental freesync video mode module parameter is enabled,
> > add
> > few extra display modes into the driver's mode list corresponding
> > to common
> > video frame rates. When userspace sets these modes, no modeset will
> > be
> > performed (if current mode was one of freesync modes or the base
> > freesync mode
> > based off which timings have been generated for the rest of the
> > freesync modes)
> > since these modes only differ from the base mode with front porch
> > timing.
> >
> > Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
> > Acked-by: Christian König <christian.koenig at amd.com>
> > ---
> > .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 167
> > ++++++++++++++++++
> > .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h | 2 +
> > 2 files changed, 169 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
> > b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
> > index e7ee2467eadb..c1ffd33e9d83 100644
> > --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
> > +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
> > @@ -5174,6 +5174,59 @@ static void
> > dm_enable_per_frame_crtc_master_sync(struct dc_state *context)
> > set_master_stream(context->streams, context->stream_count);
> > }
> >
> > +static struct drm_display_mode *
> > +get_highest_refresh_rate_mode(struct amdgpu_dm_connector
> > *aconnector,
> > + bool use_probed_modes)
> > +{
> > + struct drm_display_mode *m, *m_pref = NULL;
> > + u16 current_refresh, highest_refresh;
> > + struct list_head *list_head = use_probed_modes ?
> > + &aconnector-
> > >base.probed_modes :
> > + &aconnector-
> > >base.modes;
> > +
> > + if (aconnector->freesync_vid_base.clock != 0)
> > + return &aconnector->freesync_vid_base;
> > +
> > + /* Find the preferred mode */
> > + list_for_each_entry (m, list_head, head) {
> > + if (m->type & DRM_MODE_TYPE_PREFERRED) {
> > + m_pref = m;
> > + break;
> > + }
> > + }
> > +
> > + if (!m_pref) {
> > + /* Probably an EDID with no preferred mode.
> > Fallback to first entry */
> > + m_pref = list_first_entry_or_null(
> > + &aconnector->base.modes, struct
> > drm_display_mode, head);
> > + if (!m_pref) {
> > + DRM_DEBUG_DRIVER("No preferred mode found
> > in EDID\n");
> > + return NULL;
> > + }
> > + }
> > +
> > + highest_refresh = drm_mode_vrefresh(m_pref);
> > +
> > + /*
> > + * Find the mode with highest refresh rate with same
> > resolution.
> > + * For some monitors, preferred mode is not the mode with
> > highest
> > + * supported refresh rate.
> > + */
> > + list_for_each_entry (m, list_head, head) {
> > + current_refresh = drm_mode_vrefresh(m);
> > +
> > + if (m->hdisplay == m_pref->hdisplay &&
> > + m->vdisplay == m_pref->vdisplay &&
> > + highest_refresh < current_refresh) {
> > + highest_refresh = current_refresh;
> > + m_pref = m;
> > + }
> > + }
> > +
> > + aconnector->freesync_vid_base = *m_pref;
> > + return m_pref;
> > +}
> > +
> > static struct dc_stream_state *
> > create_stream_for_sink(struct amdgpu_dm_connector *aconnector,
> > const struct drm_display_mode *drm_mode,
> > @@ -6999,6 +7052,119 @@ static void
> > amdgpu_dm_connector_ddc_get_modes(struct drm_connector *connector,
> > }
> > }
> >
> > +static bool is_duplicate_mode(struct amdgpu_dm_connector
> > *aconnector,
> > + struct drm_display_mode *mode)
> > +{
> > + struct drm_display_mode *m;
> > +
> > + list_for_each_entry (m, &aconnector->base.probed_modes,
> > head) {
> > + if (drm_mode_equal(m, mode))
> > + return true;
> > + }
> > +
> > + return false;
> > +}
> > +
> > +static uint add_fs_modes(struct amdgpu_dm_connector *aconnector,
> > + struct detailed_data_monitor_range *range)
> > +{
> > + const struct drm_display_mode *m;
> > + struct drm_display_mode *new_mode;
> > + uint i;
> > + uint64_t target_vtotal, target_vtotal_diff;
> > + uint32_t new_modes_count = 0;
> > + uint64_t num, den;
> My previous review comment about num,den, target_vtotal and
> target_vtotal_diff here was neither addressed nor explained.
> > +
> > + /* Standard FPS values
> > + *
> > + * 23.976 - TV/NTSC
> > + * 24 - Cinema
> > + * 25 - TV/PAL
> > + * 29.97 - TV/NTSC
> > + * 30 - TV/NTSC
> > + * 48 - Cinema HFR
> > + * 50 - TV/PAL
> > + */
> My previous review comment about 60 fps here was neither addressed
> nor explained.
>
Sorry about that, the list_for_each is gone, so I'll move it into the
for loop. I'll add the comment as well.
Thanks for the review!
--
Thanks & Regards,
Aurabindo Pillai
_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
next prev parent reply other threads:[~2020-12-15 14:14 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-14 22:20 [PATCH v3 0/3] Experimental freesync video mode optimization Aurabindo Pillai
2020-12-14 22:20 ` [PATCH v3 1/3] drm/amd/display: Add module parameter for freesync video mode Aurabindo Pillai
2020-12-17 19:11 ` Alex Deucher
2020-12-17 22:37 ` Aurabindo Pillai
2020-12-14 22:20 ` [PATCH v3 2/3] drm/amd/display: Add freesync video modes based on preferred modes Aurabindo Pillai
2020-12-15 3:02 ` Shashank Sharma
2020-12-15 14:14 ` Aurabindo Pillai [this message]
2020-12-14 22:20 ` [PATCH v3 3/3] drm/amd/display: Skip modeset for front porch change Aurabindo Pillai
-- strict thread matches above, loose matches on Subject: below --
2021-01-04 21:07 [PATCH v3 0/3] Experimental freesync video mode optimization Aurabindo Pillai
2021-01-04 21:07 ` [PATCH v3 2/3] drm/amd/display: Add freesync video modes based on preferred modes Aurabindo Pillai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7d0ea3e95605c8ea8fcc0ca5006ba8565dafdb16.camel@amd.com \
--to=aurabindo.pillai@amd.com \
--cc=Harry.Wentland@amd.com \
--cc=alexander.deucher@amd.com \
--cc=amd-gfx@lists.freedesktop.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=nicholas.kazlauskas@amd.com \
--cc=shashank.sharma@amd.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox