AMD-GFX Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Luben Tuikov <luben.tuikov@amd.com>
To: Alex Deucher <alexdeucher@gmail.com>
Cc: Alex Deucher <Alexander.Deucher@amd.com>,
	amd-gfx list <amd-gfx@lists.freedesktop.org>
Subject: Re: [PATCH 1/2] drm/amd/pm: Add debug prints
Date: Mon, 22 Nov 2021 17:19:15 -0500	[thread overview]
Message-ID: <81dde1c9-358f-fee2-6586-890fd5ce1d2e@amd.com> (raw)
In-Reply-To: <CADnq5_PkhsvBm_+Yz+JcUEY7dxeeiwiTMM89w_DVxTjPBQwsPA@mail.gmail.com>

On 2021-11-17 16:54, Alex Deucher wrote:
> On Wed, Nov 17, 2021 at 1:56 PM Luben Tuikov <luben.tuikov@amd.com> wrote:
>> Add prints where there are none and none are printed in the callee.
>>
>> Add a print in sienna_cichlid_run_btc() to help debug and to mirror other
>> platforms, as no print is present in the caller, smu_smc_hw_setup().
>>
>> Remove the word "previous" from comment and print to make it shorter and
>> avoid confusion in various prints.
>>
>> Cc: Alex Deucher <Alexander.Deucher@amd.com>
>> Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
>> ---
>>  drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c               | 8 +++++---
>>  drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c | 8 +++++++-
>>  drivers/gpu/drm/amd/pm/swsmu/smu_cmn.c                  | 4 ++--
>>  3 files changed, 14 insertions(+), 6 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c b/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c
>> index 01168b8955bff3..67cc6fb4f422f4 100644
>> --- a/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c
>> +++ b/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c
>> @@ -1153,6 +1153,8 @@ static int smu_smc_hw_setup(struct smu_context *smu)
>>                 case IP_VERSION(11, 5, 0):
>>                 case IP_VERSION(11, 0, 12):
>>                         ret = smu_system_features_control(smu, true);
>> +                       if (ret)
>> +                               dev_err(adev->dev, "Failed system features control!\n");
>>                         break;
>>                 default:
>>                         break;
>> @@ -1277,8 +1279,10 @@ static int smu_smc_hw_setup(struct smu_context *smu)
>>         }
>>
>>         ret = smu_notify_display_change(smu);
>> -       if (ret)
>> +       if (ret) {
>> +               dev_err(adev->dev, "Failed to notify display change!\n");
>>                 return ret;
>> +       }
>>
>>         /*
>>          * Set min deep sleep dce fclk with bootup value from vbios via
>> @@ -1286,8 +1290,6 @@ static int smu_smc_hw_setup(struct smu_context *smu)
>>          */
>>         ret = smu_set_min_dcef_deep_sleep(smu,
>>                                           smu->smu_table.boot_values.dcefclk / 100);
>> -       if (ret)
>> -               return ret;
>>
>>         return ret;
>>  }
>> diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c
>> index b0bb389185d51c..f3522320df7e58 100644
>> --- a/drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c
>> +++ b/drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c
>> @@ -2135,7 +2135,13 @@ static int sienna_cichlid_od_edit_dpm_table(struct smu_context *smu,
>>
>>  static int sienna_cichlid_run_btc(struct smu_context *smu)
>>  {
>> -       return smu_cmn_send_smc_msg(smu, SMU_MSG_RunDcBtc, NULL);
>> +       int res;
>> +
>> +       res = smu_cmn_send_smc_msg(smu, SMU_MSG_RunDcBtc, NULL);
>> +       if (res)
>> +               dev_err(smu->adev->dev, "RunDcBtc failed!\n");
>> +
>> +       return res;
> Maybe better to split this hunk into a separate patch and also fix up
> the run_btc functions for other asics.

No problem. I checked all under amd/pm/swsmu and Sienna is the only one.
I'll send another set of patches.

Regards,
Luben

>
> Alex
>
>
>>  }
>>
>>  static int sienna_cichlid_baco_enter(struct smu_context *smu)
>> diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu_cmn.c b/drivers/gpu/drm/amd/pm/swsmu/smu_cmn.c
>> index ea6f50c08c5f3b..f9a42a07eeaebf 100644
>> --- a/drivers/gpu/drm/amd/pm/swsmu/smu_cmn.c
>> +++ b/drivers/gpu/drm/amd/pm/swsmu/smu_cmn.c
>> @@ -97,7 +97,7 @@ static void smu_cmn_read_arg(struct smu_context *smu,
>>   * smu: a pointer to SMU context
>>   *
>>   * Returns the status of the SMU, which could be,
>> - *    0, the SMU is busy with your previous command;
>> + *    0, the SMU is busy with your command;
>>   *    1, execution status: success, execution result: success;
>>   * 0xFF, execution status: success, execution result: failure;
>>   * 0xFE, unknown command;
>> @@ -143,7 +143,7 @@ static void __smu_cmn_reg_print_error(struct smu_context *smu,
>>                 u32 msg_idx = RREG32_SOC15(MP1, 0, mmMP1_SMN_C2PMSG_66);
>>                 u32 prm     = RREG32_SOC15(MP1, 0, mmMP1_SMN_C2PMSG_82);
>>                 dev_err_ratelimited(adev->dev,
>> -                                   "SMU: I'm not done with your previous command: SMN_C2PMSG_66:0x%08X SMN_C2PMSG_82:0x%08X",
>> +                                   "SMU: I'm not done with your command: SMN_C2PMSG_66:0x%08X SMN_C2PMSG_82:0x%08X",
>>                                     msg_idx, prm);
>>         }
>>                 break;
>>
>> base-commit: ae2faedcc13fa5ee109ceb9e8cc05d759ad57980
>> --
>> 2.34.0
>>


      reply	other threads:[~2021-11-22 22:19 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-11-17 18:55 [PATCH 1/2] drm/amd/pm: Add debug prints Luben Tuikov
2021-11-17 18:55 ` [PATCH 2/2] drm/amd/pm: Print the error on command submission Luben Tuikov
2021-11-17 21:55   ` Alex Deucher
2021-11-17 21:54 ` [PATCH 1/2] drm/amd/pm: Add debug prints Alex Deucher
2021-11-22 22:19   ` Luben Tuikov [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=81dde1c9-358f-fee2-6586-890fd5ce1d2e@amd.com \
    --to=luben.tuikov@amd.com \
    --cc=Alexander.Deucher@amd.com \
    --cc=alexdeucher@gmail.com \
    --cc=amd-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox