AMD-GFX Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Filip Moc <dev@moc6.cz>
To: Alex Deucher <alexdeucher@gmail.com>
Cc: "Leo Li" <sunpeng.li@amd.com>, "Pan, Xinhui" <Xinhui.Pan@amd.com>,
	"Rodrigo Siqueira" <Rodrigo.Siqueira@amd.com>,
	linux-kernel@vger.kernel.org, amd-gfx@lists.freedesktop.org,
	"David Airlie" <airlied@linux.ie>,
	dri-devel@lists.freedesktop.org,
	"Alex Deucher" <alexander.deucher@amd.com>,
	"Harry Wentland" <harry.wentland@amd.com>,
	"Christian König" <christian.koenig@amd.com>
Subject: Re: [PATCH] drm/amd/display: add parameter backlight_min
Date: Tue, 1 Nov 2022 16:42:21 +0100	[thread overview]
Message-ID: <Y2E+XUEPbQn2tMt+@moc6.cz> (raw)
In-Reply-To: <CADnq5_Muegi+dvmrg5U=Cau_oeXQFjv_h2Pdn_j9AG0mRgE4=g@mail.gmail.com>

Hello Alex,

thank you for your response.

Yes, I have HP ENVY x360 Convertible 13-ay1xxx, and backlight_min=2
seems to work the best in my case.

I added a dmi based quirk table. So far with support only for display 0
to make it simple. Support for more displays in quirk table can be added
later if ever needed.

According to [1] HP ENVY x360 Convertible 13-ag0xxx also needs a quirk
so I'm going to use this to cover both:
DMI_EXACT_MATCH(DMI_SYS_VENDOR, "HP")
DMI_MATCH(DMI_PRODUCT_NAME, "HP ENVY x360 Convertible 13-")

So far it seems to be working fine.
I'll send this in v2 once I do some final tweaks and do more tests.

[1] https://bugzilla.kernel.org/show_bug.cgi?id=203439#c5

Filip


V Mon, Oct 31, 2022 at 11:36:09AM -0400, Alex Deucher napsal(a):
> On Sun, Oct 30, 2022 at 5:26 AM Filip Moc <dev@moc6.cz> wrote:
> >
> > There are some devices on which amdgpu won't allow user to set brightness
> > to sufficiently low values even though the hardware would support it just
> > fine.
> >
> > This usually happens in two cases when either configuration of brightness
> > levels via ACPI/ATIF is not available and amdgpu falls back to defaults
> > (currently 12 for minimum level) which may be too high for some devices or
> > even the configuration via ATIF is available but the minimum brightness
> > level provided by the manufacturer is set to unreasonably high value.
> >
> > In either case user can use this new module parameter to adjust the
> > minimum allowed backlight brightness level.
> >
> > Link: https://bugzilla.kernel.org/show_bug.cgi?id=203439
> > Signed-off-by: Filip Moc <dev@moc6.cz>
> 
> Does your system require an override and if so, what is it?  It would
> be good to add a quirk for your system as well so that other users of
> the same system wouldn't need to manually figure out an apply the
> settings.
> 
> Alex
> 
> 
> > ---
> >  drivers/gpu/drm/amd/amdgpu/amdgpu.h               |  3 +++
> >  drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c           | 15 +++++++++++++++
> >  drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 15 +++++++++++++++
> >  3 files changed, 33 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu.h b/drivers/gpu/drm/amd/amdgpu/amdgpu.h
> > index 0e6ddf05c23c..c5445402c49d 100644
> > --- a/drivers/gpu/drm/amd/amdgpu/amdgpu.h
> > +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu.h
> > @@ -200,6 +200,9 @@ extern uint amdgpu_dc_debug_mask;
> >  extern uint amdgpu_dc_visual_confirm;
> >  extern uint amdgpu_dm_abm_level;
> >  extern int amdgpu_backlight;
> > +#ifdef CONFIG_DRM_AMD_DC
> > +extern int amdgpu_backlight_override_min[];
> > +#endif
> >  extern struct amdgpu_mgpu_info mgpu_info;
> >  extern int amdgpu_ras_enable;
> >  extern uint amdgpu_ras_mask;
> > diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
> > index 16f6a313335e..f2fb549ac52f 100644
> > --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
> > +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
> > @@ -43,6 +43,7 @@
> >  #include "amdgpu_irq.h"
> >  #include "amdgpu_dma_buf.h"
> >  #include "amdgpu_sched.h"
> > +#include "amdgpu_dm.h"
> >  #include "amdgpu_fdinfo.h"
> >  #include "amdgpu_amdkfd.h"
> >
> > @@ -853,6 +854,20 @@ int amdgpu_backlight = -1;
> >  MODULE_PARM_DESC(backlight, "Backlight control (0 = pwm, 1 = aux, -1 auto (default))");
> >  module_param_named(backlight, amdgpu_backlight, bint, 0444);
> >
> > +/**
> > + * DOC: backlight_min (array of int)
> > + * Override minimum allowed backlight brightness signal (per display).
> > + * Must be less than the maximum brightness signal.
> > + * Negative value means no override.
> > + *
> > + * Defaults to all -1 (no override on any display).
> > + */
> > +#ifdef CONFIG_DRM_AMD_DC
> > +int amdgpu_backlight_override_min[AMDGPU_DM_MAX_NUM_EDP] = {[0 ... (AMDGPU_DM_MAX_NUM_EDP-1)] = -1};
> > +MODULE_PARM_DESC(backlight_min, "Override minimum backlight brightness signal (0..max-1, -1 = no override (default))");
> > +module_param_array_named(backlight_min, amdgpu_backlight_override_min, int, NULL, 0444);
> > +#endif
> > +
> >  /**
> >   * DOC: tmz (int)
> >   * Trusted Memory Zone (TMZ) is a method to protect data being written
> > diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
> > index eb4ce7216104..e2c36ba93d05 100644
> > --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
> > +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
> > @@ -3911,6 +3911,21 @@ static void amdgpu_dm_update_backlight_caps(struct amdgpu_display_manager *dm,
> >         dm->backlight_caps[bl_idx].min_input_signal = AMDGPU_DM_DEFAULT_MIN_BACKLIGHT;
> >         dm->backlight_caps[bl_idx].max_input_signal = AMDGPU_DM_DEFAULT_MAX_BACKLIGHT;
> >  #endif
> > +
> > +       if (amdgpu_backlight_override_min[bl_idx] >= 0) {
> > +               if (amdgpu_backlight_override_min[bl_idx] < dm->backlight_caps[bl_idx].max_input_signal) {
> > +                       DRM_INFO("amdgpu: backlight[%i]: overriding minimum brightness from %i to %i\n",
> > +                                 bl_idx,
> > +                                 dm->backlight_caps[bl_idx].min_input_signal,
> > +                                 amdgpu_backlight_override_min[bl_idx]);
> > +                       dm->backlight_caps[bl_idx].min_input_signal = amdgpu_backlight_override_min[bl_idx];
> > +               } else {
> > +                       DRM_ERROR("amdgpu: backlight[%i]: minimum brightness override (%i) is not below maximum (%i)\n",
> > +                                 bl_idx,
> > +                                 amdgpu_backlight_override_min[bl_idx],
> > +                                 dm->backlight_caps[bl_idx].max_input_signal);
> > +               }
> > +       }
> >  }
> >
> >  static int get_brightness_range(const struct amdgpu_dm_backlight_caps *caps,
> >
> > base-commit: d8c03bfe146fd5e081a252cd34f3f12ca0255357
> > --
> > 2.30.2
> >

  reply	other threads:[~2022-11-01 15:50 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-10-29 19:13 [PATCH] drm/amd/display: add parameter backlight_min Filip Moc
2022-10-31 14:24 ` Harry Wentland
2022-11-01 15:33   ` Filip Moc
2022-11-02 14:57     ` Harry Wentland
2022-10-31 15:36 ` Alex Deucher
2022-11-01 15:42   ` Filip Moc [this message]
2022-11-01 16:06     ` Alex Deucher
2022-11-13 18:12       ` Filip Moc

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=Y2E+XUEPbQn2tMt+@moc6.cz \
    --to=dev@moc6.cz \
    --cc=Rodrigo.Siqueira@amd.com \
    --cc=Xinhui.Pan@amd.com \
    --cc=airlied@linux.ie \
    --cc=alexander.deucher@amd.com \
    --cc=alexdeucher@gmail.com \
    --cc=amd-gfx@lists.freedesktop.org \
    --cc=christian.koenig@amd.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=harry.wentland@amd.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=sunpeng.li@amd.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox