AMD-GFX Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Simona Vetter <simona.vetter@ffwll.ch>
To: "Christian König" <ckoenig.leichtzumerken@gmail.com>
Cc: amd-gfx@lists.freedesktop.org, alexander.deucher@amd.com, sima@ffwll.ch
Subject: Re: [PATCH] drm/amdgpu: mark a bunch of module parameters unsafe
Date: Tue, 7 Jan 2025 17:00:02 +0100	[thread overview]
Message-ID: <Z31PgleArdPbhGAw@phenom.ffwll.local> (raw)
In-Reply-To: <20250107145308.53467-1-christian.koenig@amd.com>

On Tue, Jan 07, 2025 at 03:53:08PM +0100, Christian König wrote:
> We sometimes have people trying to use debugging options in production
> environments.
> 
> Mark options only meant to be used for debugging as unsafe so that the
> kernel is tainted when they are used.
> 
> Signed-off-by: Christian König <christian.koenig@amd.com>

Acked-by: Simona Vetter <simona.vetter@ffwll.ch>

> ---
>  drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 14 +++++++-------
>  1 file changed, 7 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
> index acb9dc3705ac..9ddfdb02a6a2 100644
> --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
> +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
> @@ -401,7 +401,7 @@ module_param_named(runpm, amdgpu_runtime_pm, int, 0444);
>   * the kernel log for the list of IPs on the asic. The default is 0xffffffff (enable all blocks on a device).
>   */
>  MODULE_PARM_DESC(ip_block_mask, "IP Block Mask (all blocks enabled (default))");
> -module_param_named(ip_block_mask, amdgpu_ip_block_mask, uint, 0444);
> +module_param_named_unsafe(ip_block_mask, amdgpu_ip_block_mask, uint, 0444);
>  
>  /**
>   * DOC: bapm (int)
> @@ -459,7 +459,7 @@ module_param_named(vm_update_mode, amdgpu_vm_update_mode, int, 0444);
>   * Enable experimental hw support (1 = enable). The default is 0 (disabled).
>   */
>  MODULE_PARM_DESC(exp_hw_support, "experimental hw support (1 = enable, 0 = disable (default))");
> -module_param_named(exp_hw_support, amdgpu_exp_hw_support, int, 0444);
> +module_param_named_unsafe(exp_hw_support, amdgpu_exp_hw_support, int, 0444);
>  
>  /**
>   * DOC: dc (int)
> @@ -570,14 +570,14 @@ module_param_named(compute_multipipe, amdgpu_compute_multipipe, int, 0444);
>   * Set to enable GPU recovery mechanism (1 = enable, 0 = disable). The default is -1 (auto, disabled except SRIOV).
>   */
>  MODULE_PARM_DESC(gpu_recovery, "Enable GPU recovery mechanism, (1 = enable, 0 = disable, -1 = auto)");
> -module_param_named(gpu_recovery, amdgpu_gpu_recovery, int, 0444);
> +module_param_named_unsafe(gpu_recovery, amdgpu_gpu_recovery, int, 0444);
>  
>  /**
>   * DOC: emu_mode (int)
>   * Set value 1 to enable emulation mode. This is only needed when running on an emulator. The default is 0 (disabled).
>   */
>  MODULE_PARM_DESC(emu_mode, "Emulation mode, (1 = enable, 0 = disable)");
> -module_param_named(emu_mode, amdgpu_emu_mode, int, 0444);
> +module_param_named_unsafe(emu_mode, amdgpu_emu_mode, int, 0444);
>  
>  /**
>   * DOC: ras_enable (int)
> @@ -732,7 +732,7 @@ module_param_named(noretry, amdgpu_noretry, int, 0644);
>   */
>  MODULE_PARM_DESC(force_asic_type,
>  	"A non negative value used to specify the asic type for all supported GPUs");
> -module_param_named(force_asic_type, amdgpu_force_asic_type, int, 0444);
> +module_param_named_unsafe(force_asic_type, amdgpu_force_asic_type, int, 0444);
>  
>  /**
>   * DOC: use_xgmi_p2p (int)
> @@ -955,7 +955,7 @@ module_param_named(freesync_video, amdgpu_freesync_vid_mode, uint, 0444);
>   * GPU reset method (-1 = auto (default), 0 = legacy, 1 = mode0, 2 = mode1, 3 = mode2, 4 = baco)
>   */
>  MODULE_PARM_DESC(reset_method, "GPU reset method (-1 = auto (default), 0 = legacy, 1 = mode0, 2 = mode1, 3 = mode2, 4 = baco/bamaco)");
> -module_param_named(reset_method, amdgpu_reset_method, int, 0644);
> +module_param_named_unsafe(reset_method, amdgpu_reset_method, int, 0644);
>  
>  /**
>   * DOC: bad_page_threshold (int) Bad page threshold is specifies the
> @@ -1051,7 +1051,7 @@ module_param_named(seamless, amdgpu_seamless, int, 0444);
>   * - 0x4: Disable GPU soft recovery, always do a full reset
>   */
>  MODULE_PARM_DESC(debug_mask, "debug options for amdgpu, disabled by default");
> -module_param_named(debug_mask, amdgpu_debug_mask, uint, 0444);
> +module_param_named_unsafe(debug_mask, amdgpu_debug_mask, uint, 0444);
>  
>  /**
>   * DOC: agp (int)
> -- 
> 2.34.1
> 

-- 
Simona Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch

  reply	other threads:[~2025-01-07 16:01 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-01-07 14:53 [PATCH] drm/amdgpu: mark a bunch of module parameters unsafe Christian König
2025-01-07 16:00 ` Simona Vetter [this message]
2025-01-07 22:17 ` Felix Kuehling

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=Z31PgleArdPbhGAw@phenom.ffwll.local \
    --to=simona.vetter@ffwll.ch \
    --cc=alexander.deucher@amd.com \
    --cc=amd-gfx@lists.freedesktop.org \
    --cc=ckoenig.leichtzumerken@gmail.com \
    --cc=sima@ffwll.ch \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox