From: Rodrigo Siqueira <siqueira@igalia.com>
To: "Timur Kristóf" <timur.kristof@gmail.com>,
"Alex Hung" <alex.hung@amd.com>
Cc: amd-gfx@lists.freedesktop.org, Alexander.Deucher@amd.com,
Mario Limonciello <mario.limonciello@amd.com>,
Ivan Lipski <ivan.lipski@amd.com>,
harry.wentland@amd.com, Leo Li <sunpeng.li@amd.com>
Subject: Re: [PATCH 3/5] drm/amd/display: Remove unused dce60_clk_mgr register definitions
Date: Tue, 3 Feb 2026 16:43:51 -0700 [thread overview]
Message-ID: <aYKH9e6VnIgRIg87@atmagalia> (raw)
In-Reply-To: <20260118173150.19790-4-timur.kristof@gmail.com>
On 01/18, Timur Kristóf wrote:
> It turned out that these were actually not necessary.
>
> Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
> ---
> .../display/dc/clk_mgr/dce60/dce60_clk_mgr.c | 30 ++-----------------
> .../amd/display/dc/inc/hw/clk_mgr_internal.h | 11 -------
> 2 files changed, 3 insertions(+), 38 deletions(-)
>
> diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dce60/dce60_clk_mgr.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dce60/dce60_clk_mgr.c
> index 69dd80d9f738..1fdf344efe1a 100644
> --- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dce60/dce60_clk_mgr.c
> +++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dce60/dce60_clk_mgr.c
> @@ -43,30 +43,6 @@
> #include "dce/dce_6_0_d.h"
> #include "dce/dce_6_0_sh_mask.h"
>
> -#define REG(reg) \
> - (clk_mgr->regs->reg)
> -
> -#undef FN
> -#define FN(reg_name, field_name) \
> - clk_mgr->clk_mgr_shift->field_name, clk_mgr->clk_mgr_mask->field_name
> -
> -/* set register offset */
> -#define SR(reg_name)\
> - .reg_name = mm ## reg_name
> -
> -static const struct clk_mgr_registers disp_clk_regs = {
> - CLK_COMMON_REG_LIST_DCE60_BASE()
> -};
> -
> -static const struct clk_mgr_shift disp_clk_shift = {
> - CLK_COMMON_MASK_SH_LIST_DCE60_COMMON_BASE(__SHIFT)
> -};
> -
> -static const struct clk_mgr_mask disp_clk_mask = {
> - CLK_COMMON_MASK_SH_LIST_DCE60_COMMON_BASE(_MASK)
> -};
> -
> -
> /* Max clock values for each state indexed by "enum clocks_state": */
> static const struct state_dependent_clocks dce60_max_clks_by_state[] = {
> /* ClocksStateInvalid - should not be used */
> @@ -155,9 +131,9 @@ void dce60_clk_mgr_construct(
> dce60_max_clks_by_state,
> sizeof(dce60_max_clks_by_state));
>
> - clk_mgr->regs = &disp_clk_regs;
> - clk_mgr->clk_mgr_shift = &disp_clk_shift;
> - clk_mgr->clk_mgr_mask = &disp_clk_mask;
> + clk_mgr->regs = NULL;
> + clk_mgr->clk_mgr_shift = NULL;
> + clk_mgr->clk_mgr_mask = NULL;
After looking into the next commit, I got why you did this change. Maybe
for future patches, expand the commit message and mention that this is a
transition step. Anyway:
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
> clk_mgr->base.funcs = &dce60_funcs;
>
> base->clks.max_supported_dispclk_khz =
> diff --git a/drivers/gpu/drm/amd/display/dc/inc/hw/clk_mgr_internal.h b/drivers/gpu/drm/amd/display/dc/inc/hw/clk_mgr_internal.h
> index bac8febad69a..836a28134d41 100644
> --- a/drivers/gpu/drm/amd/display/dc/inc/hw/clk_mgr_internal.h
> +++ b/drivers/gpu/drm/amd/display/dc/inc/hw/clk_mgr_internal.h
> @@ -89,11 +89,6 @@ enum dentist_divider_range {
> .DPREFCLK_CNTL = mmDPREFCLK_CNTL, \
> .DENTIST_DISPCLK_CNTL = mmDENTIST_DISPCLK_CNTL
>
> -#if defined(CONFIG_DRM_AMD_DC_SI)
> -#define CLK_COMMON_REG_LIST_DCE60_BASE() \
> - SR(DENTIST_DISPCLK_CNTL)
> -#endif
> -
> #define CLK_COMMON_REG_LIST_DCN_BASE() \
> SR(DENTIST_DISPCLK_CNTL)
>
> @@ -119,12 +114,6 @@ enum dentist_divider_range {
> CLK_SF(DPREFCLK_CNTL, DPREFCLK_SRC_SEL, mask_sh), \
> CLK_SF(DENTIST_DISPCLK_CNTL, DENTIST_DPREFCLK_WDIVIDER, mask_sh)
>
> -#if defined(CONFIG_DRM_AMD_DC_SI)
> -#define CLK_COMMON_MASK_SH_LIST_DCE60_COMMON_BASE(mask_sh) \
> - CLK_SF(DENTIST_DISPCLK_CNTL, DENTIST_DISPCLK_WDIVIDER, mask_sh),\
> - CLK_SF(DENTIST_DISPCLK_CNTL, DENTIST_DISPCLK_CHG_DONE, mask_sh)
> -#endif
> -
> #define CLK_COMMON_MASK_SH_LIST_DCN_COMMON_BASE(mask_sh) \
> CLK_SF(DENTIST_DISPCLK_CNTL, DENTIST_DISPCLK_WDIVIDER, mask_sh),\
> CLK_SF(DENTIST_DISPCLK_CNTL, DENTIST_DISPCLK_CHG_DONE, mask_sh)
> --
> 2.52.0
>
--
Rodrigo Siqueira
https://siqueira.tech
next prev parent reply other threads:[~2026-02-03 23:44 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-18 17:31 [PATCH 0/5] drm/amd/display: Clean up some DCE 6 code Timur Kristóf
2026-01-18 17:31 ` [PATCH 1/5] drm/amd/display: Use dce_audio_create for DCE 6 Timur Kristóf
2026-02-02 14:50 ` Rodrigo Siqueira
2026-01-18 17:31 ` [PATCH 2/5] drm/amd/display: Delete unused dce_clk_mgr.c Timur Kristóf
2026-02-02 14:54 ` Rodrigo Siqueira
2026-01-18 17:31 ` [PATCH 3/5] drm/amd/display: Remove unused dce60_clk_mgr register definitions Timur Kristóf
2026-02-03 23:43 ` Rodrigo Siqueira [this message]
2026-01-18 17:31 ` [PATCH 4/5] drm/amd/display: Handle DCE 6 in dce_clk_mgr.c Timur Kristóf
2026-01-30 18:47 ` Alex Hung
2026-02-03 23:45 ` Rodrigo Siqueira
2026-02-09 17:21 ` Alex Hung
2026-02-09 22:11 ` Timur Kristóf
2026-02-15 5:06 ` Alex Hung
2026-02-16 15:19 ` Timur Kristóf
2026-02-16 17:49 ` Alex Hung
2026-02-16 18:22 ` Timur Kristóf
2026-01-18 17:31 ` [PATCH 5/5] drm/amd/display: Handle DCE 6 in dce110_register_irq_handlers Timur Kristóf
2026-02-09 15:48 ` [PATCH 0/5] drm/amd/display: Clean up some DCE 6 code Rodrigo Siqueira
2026-02-09 17:25 ` Alex Hung
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aYKH9e6VnIgRIg87@atmagalia \
--to=siqueira@igalia.com \
--cc=Alexander.Deucher@amd.com \
--cc=alex.hung@amd.com \
--cc=amd-gfx@lists.freedesktop.org \
--cc=harry.wentland@amd.com \
--cc=ivan.lipski@amd.com \
--cc=mario.limonciello@amd.com \
--cc=sunpeng.li@amd.com \
--cc=timur.kristof@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox