From: Mario Limonciello <superm1@kernel.org>
To: Vivek Das Mohapatra <vivek@collabora.com>
Cc: airlied@gmail.com, alexander.deucher@amd.com,
amd-gfx@lists.freedesktop.org, christian.koenig@amd.com,
dri-devel@lists.freedesktop.org, harry.wentland@amd.com,
kernel@collabora.com, linux-kernel@vger.kernel.org,
simona@ffwll.ch, siqueira@igalia.com, sunpeng.li@amd.com
Subject: Re: [PATCH v2] drm/amd/display: Initialise backlight level values from hw
Date: Mon, 12 Jan 2026 09:52:20 -0600 [thread overview]
Message-ID: <d928e0e0-2478-4cdc-9d7d-5a984a8146d2@kernel.org> (raw)
In-Reply-To: <20260112152856.2616532-1-vivek@collabora.com>
On 1/12/26 9:28 AM, Vivek Das Mohapatra wrote:
> Internal backlight levels are initialised from ACPI but the values
> are sometimes out of sync with the levels in effect until there has
> been a read from hardware (eg triggered by reading from sysfs).
>
> This means that the first drm_commit can cause the levels to be set
> to a different value than the actual starting one, which results in
> a sudden change in brightness.
>
> This path shows the problem (when the values are out of sync):
>
> amdgpu_dm_atomic_commit_tail()
> -> amdgpu_dm_commit_streams()
> -> amdgpu_dm_backlight_set_level(..., dm->brightness[n])
>
> This patch calls the backlight ops get_brightness explicitly
> at the end of backlight registration to make sure dm->brightness[n]
> is in sync with the actual hardware levels.
>
> Signed-off-by: Vivek Das Mohapatra <vivek@collabora.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
> ---
> .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 18 +++++++++++++++++-
> 1 file changed, 17 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
> index 354e359c4507..9e8cbfeee915 100644
> --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
> +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
> @@ -5258,6 +5258,8 @@ amdgpu_dm_register_backlight_device(struct amdgpu_dm_connector *aconnector)
> struct amdgpu_dm_backlight_caps *caps;
> char bl_name[16];
> int min, max;
> + int real_brightness;
> + int init_brightness;
>
> if (aconnector->bl_idx == -1)
> return;
> @@ -5282,6 +5284,8 @@ amdgpu_dm_register_backlight_device(struct amdgpu_dm_connector *aconnector)
> } else
> props.brightness = props.max_brightness = MAX_BACKLIGHT_LEVEL;
>
> + init_brightness = props.brightness;
> +
> if (caps->data_points && !(amdgpu_dc_debug_mask & DC_DISABLE_CUSTOM_BRIGHTNESS_CURVE)) {
> drm_info(drm, "Using custom brightness curve\n");
> props.scale = BACKLIGHT_SCALE_NON_LINEAR;
> @@ -5300,8 +5304,20 @@ amdgpu_dm_register_backlight_device(struct amdgpu_dm_connector *aconnector)
> if (IS_ERR(dm->backlight_dev[aconnector->bl_idx])) {
> drm_err(drm, "DM: Backlight registration failed!\n");
> dm->backlight_dev[aconnector->bl_idx] = NULL;
> - } else
> + } else {
> + /*
> + * dm->brightness[x] can be inconsistent just after startup until
> + * ops.get_brightness is called.
> + */
> + real_brightness =
> + amdgpu_dm_backlight_ops.get_brightness(dm->backlight_dev[aconnector->bl_idx]);
> +
> + if (real_brightness != init_brightness) {
> + dm->actual_brightness[aconnector->bl_idx] = real_brightness;
> + dm->brightness[aconnector->bl_idx] = real_brightness;
> + }
> drm_dbg_driver(drm, "DM: Registered Backlight device: %s\n", bl_name);
> + }
> }
>
> static int initialize_plane(struct amdgpu_display_manager *dm,
prev parent reply other threads:[~2026-01-12 15:52 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-12 12:20 [PATCH v1] drm/amd/display: Initialise backlight level values from hw Vivek Das Mohapatra
2026-01-12 14:10 ` Mario Limonciello
2026-01-12 15:28 ` [PATCH v2] " Vivek Das Mohapatra
2026-01-12 15:52 ` Mario Limonciello [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d928e0e0-2478-4cdc-9d7d-5a984a8146d2@kernel.org \
--to=superm1@kernel.org \
--cc=airlied@gmail.com \
--cc=alexander.deucher@amd.com \
--cc=amd-gfx@lists.freedesktop.org \
--cc=christian.koenig@amd.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=harry.wentland@amd.com \
--cc=kernel@collabora.com \
--cc=linux-kernel@vger.kernel.org \
--cc=simona@ffwll.ch \
--cc=siqueira@igalia.com \
--cc=sunpeng.li@amd.com \
--cc=vivek@collabora.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox