From: sashiko-bot@kernel.org
To: "Hugo Sales" <hugo@hsal.es>
Cc: amd-gfx@lists.freedesktop.org, dri-devel@lists.freedesktop.org
Subject: Re: [PATCH v2 4/5] drm/amd/display: Commit panel_power_savings writes from the kernel
Date: Fri, 13 Nov 2026 21:28:47 +0000 [thread overview]
Message-ID: <sashiko-outbox-213714@kernel.org> (raw)
In-Reply-To: <20261113-abm-sysfs-commit-v2-4-5808d17a7e89@hsal.es>
Thank you for your contribution! Sashiko AI review found 1 potential
issue to consider:
- [High] drm/amd/display: overlay plane loss in
panel_power_savings_apply() with VRR
--
commit f07b9f0f5284e550d50d58da3cfcd7dcb7eae3b4
Author: Hugo Sales <hugo@hsal.es>
drm/amd/display: Commit panel_power_savings writes from the kernel
This commit updates panel_power_savings_store() to apply ABM level changes
through a non-modeset atomic commit instead of sending a hotplug uevent.
> diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_backlight.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_backlight.c
> index 27546febf90d3..8487ac0661396 100644
> --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_backlight.c
> +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_backlight.c
[ ... ]
> @@ -712,13 +727,100 @@ ssize_t panel_power_savings_show(struct device *device,
> }
> EXPORT_IF_KUNIT(panel_power_savings_show);
>
> +static int panel_power_savings_apply(struct drm_connector *connector,
> + unsigned int level)
> +{
> + struct drm_connector_state *conn_state;
> + struct dm_connector_state *dm_state;
> + struct drm_device *dev = connector->dev;
> + struct drm_modeset_acquire_ctx ctx;
> + struct drm_atomic_commit *state;
> + bool forbidden, unchanged;
> + int ret, idx;
[ ... ]
> +retry:
> + conn_state = drm_atomic_get_connector_state(state, connector);
> + if (IS_ERR(conn_state)) {
> + ret = PTR_ERR(conn_state);
> + goto out;
> + }
> +
> + dm_state = to_dm_connector_state(conn_state);
> + if (dm_state->abm_sysfs_forbidden) {
> + ret = -EBUSY;
> + goto out;
> + }
> +
> + if (dm_state->abm_level == level) {
> + ret = 0;
> + goto out;
> + }
> +
> + dm_state->abm_level = level;
> +
> + ret = drm_atomic_commit(state);
[Severity: High]
Can this commit drop active overlay planes from DC when VRR is enabled on
the CRTC?
panel_power_savings_apply() builds a non-modeset commit containing only
the connector and its CRTC, with no planes. In amdgpu_dm_atomic_check(),
the loop that pulls in all primary and overlay planes on a CRTC runs
before drm_atomic_helper_check_planes(), while state still has no planes,
so it skips the CRTC. Later, drm_atomic_helper_check_planes() calls
amdgpu_dm_crtc_helper_atomic_check():
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_crtc.c:amdgpu_dm_crtc_helper_atomic_check() {
...
if (!state->legacy_cursor_update && amdgpu_dm_crtc_vrr_active(dm_crtc_state)) {
struct drm_plane_state *primary_state;
/* Pull in primary plane for correct VRR handling */
primary_state = drm_atomic_get_plane_state(state, crtc->primary);
if (IS_ERR(primary_state))
return PTR_ERR(primary_state);
}
...
}
That adds only crtc->primary to state after the plane-gathering loop has
already run. In amdgpu_dm_commit_planes(), planes_count is then 1, and
update_planes_and_stream_state() sees stream_status->plane_count !=
surface_count, elevates the update to UPDATE_TYPE_FULL, and calls
dc_state_rem_all_planes_for_stream() followed by
dc_state_add_all_planes_for_stream() with only the primary plane,
detaching any enabled overlay plane in DC while DRM state still tracks it
as active.
--
Sashiko AI review · https://sashiko.dev/#/patchset/20261113-abm-sysfs-commit-v2-0-5808d17a7e89@hsal.es?part=4
next prev parent reply other threads:[~2026-11-13 21:29 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-13 20:24 [PATCH v2 0/5] drm/amd/display: Commit panel_power_savings writes from the kernel Hugo Sales via B4 Relay
2026-11-13 20:24 ` [PATCH v2 1/5] drm/amd/display: Render the panel power savings kernel-doc Hugo Sales via B4 Relay
2026-11-13 20:24 ` [PATCH v2 2/5] drm/amd/display: Don't force a modeset when the ABM level changes Hugo Sales via B4 Relay
2026-11-13 21:07 ` sashiko-bot
2026-11-15 15:31 ` Hugo Sales
2026-11-16 9:18 ` Chen, Chen-Yu
2026-11-13 20:24 ` [PATCH v2 3/5] drm/amd/display: Give the panel_power_savings store tests a full pipe Hugo Sales via B4 Relay
2026-11-13 20:24 ` [PATCH v2 4/5] drm/amd/display: Commit panel_power_savings writes from the kernel Hugo Sales via B4 Relay
2026-11-13 21:28 ` sashiko-bot [this message]
2026-11-15 15:32 ` Hugo Sales
2026-11-16 9:07 ` Chen, Chen-Yu
2026-11-13 20:24 ` [PATCH v2 5/5] drm/amd/display: Test panel_power_savings commits Hugo Sales via B4 Relay
[not found] ` <335815674.648716.1794838310991@app.mailbox.org>
2026-11-16 14:28 ` [PATCH v2 0/5] drm/amd/display: Commit panel_power_savings writes from the kernel Chen, Chen-Yu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=sashiko-outbox-213714@kernel.org \
--to=sashiko-bot@kernel.org \
--cc=amd-gfx@lists.freedesktop.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=hugo@hsal.es \
--cc=sashiko-reviews@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox