asahi.lists.linux.dev archive mirror
 help / color / mirror / Atom feed
From: James Calligeros <jcalligeros99@gmail.com>
To: Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>,
	 Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
	 Shenghao Ding <shenghao-ding@ti.com>, Kevin Lu <kevin-lu@ti.com>,
	 Baojun Xu <baojun.xu@ti.com>, Dan Murphy <dmurphy@ti.com>,
	 Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	 Conor Dooley <conor+dt@kernel.org>,
	Shi Fu <shifu0704@thundersoft.com>,
	 Jean Delvare <jdelvare@suse.com>,
	Guenter Roeck <linux@roeck-us.net>
Cc: "Alyssa Rosenzweig" <alyssa@rosenzweig.io>,
	"Martin Povišer" <povik+lin@cutebit.org>,
	"Hector Martin" <marcan@marcan.st>,
	linux-sound@vger.kernel.org, linux-kernel@vger.kernel.org,
	devicetree@vger.kernel.org, asahi@lists.linux.dev,
	linux-hwmon@vger.kernel.org, "Neal Gompa" <neal@gompa.dev>,
	"James Calligeros" <jcalligeros99@gmail.com>
Subject: [PATCH v4 06/10] ASoC: tas2764: Crop SDOUT zero-out mask based on BCLK ratio
Date: Sat, 05 Apr 2025 10:12:43 +1000	[thread overview]
Message-ID: <20250405-apple-codec-changes-v4-6-d007e46ce4a2@gmail.com> (raw)
In-Reply-To: <20250405-apple-codec-changes-v4-0-d007e46ce4a2@gmail.com>

From: Martin Povišer <povik+lin@cutebit.org>

As per the datasheet, SDOUT bits must be zeroed out if the
corresponding TDM slot is invalid for a given clock ratio.

Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
---
 sound/soc/codecs/tas2764.c | 39 +++++++++++++++++++++++++
 1 file changed, 39 insertions(+)

diff --git a/sound/soc/codecs/tas2764.c b/sound/soc/codecs/tas2764.c
index fbfe4d032df7b26b7db0f7c7dcb47661277006d0..e291ec0951d49ee902589df16c4db96e83614e66 100644
--- a/sound/soc/codecs/tas2764.c
+++ b/sound/soc/codecs/tas2764.c
@@ -367,6 +367,44 @@ static int tas2764_hw_params(struct snd_pcm_substream *substream,
 	return tas2764_set_samplerate(tas2764, params_rate(params));
 }
 
+static int tas2764_write_sdout_zero_mask(struct tas2764_priv *tas2764, int bclk_ratio)
+{
+	struct snd_soc_component *component = tas2764->component;
+	int nsense_slots = bclk_ratio / 8;
+	u32 cropped_mask;
+	int i, ret;
+
+	if (!tas2764->sdout_zero_mask)
+		return 0;
+
+	cropped_mask = tas2764->sdout_zero_mask & GENMASK(nsense_slots - 1, 0);
+
+	for (i = 0; i < 4; i++) {
+		ret = snd_soc_component_write(component, TAS2764_SDOUT_HIZ_1 + i,
+					      (cropped_mask >> (i * 8)) & 0xff);
+
+		if (ret < 0)
+			return ret;
+	}
+
+	ret = snd_soc_component_update_bits(component, TAS2764_SDOUT_HIZ_9,
+					    TAS2764_SDOUT_HIZ_9_FORCE_0_EN,
+					    TAS2764_SDOUT_HIZ_9_FORCE_0_EN);
+
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int tas2764_set_bclk_ratio(struct snd_soc_dai *dai, unsigned int ratio)
+{
+	struct snd_soc_component *component = dai->component;
+	struct tas2764_priv *tas2764 = snd_soc_component_get_drvdata(component);
+
+	return tas2764_write_sdout_zero_mask(tas2764, ratio);
+}
+
 static int tas2764_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
 {
 	struct snd_soc_component *component = dai->component;
@@ -506,6 +544,7 @@ static int tas2764_set_dai_tdm_slot(struct snd_soc_dai *dai,
 static const struct snd_soc_dai_ops tas2764_dai_ops = {
 	.mute_stream = tas2764_mute,
 	.hw_params  = tas2764_hw_params,
+	.set_bclk_ratio = tas2764_set_bclk_ratio,
 	.set_fmt    = tas2764_set_fmt,
 	.set_tdm_slot = tas2764_set_dai_tdm_slot,
 	.no_capture_mute = 1,

-- 
2.49.0


  parent reply	other threads:[~2025-04-05  0:13 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-04-05  0:12 [PATCH v4 00/10] ASoC: tas27{64,70}: improve support for Apple codec variants James Calligeros
2025-04-05  0:12 ` [PATCH v4 01/10] ASoC: tas2770: Power cycle amp on ISENSE/VSENSE change James Calligeros
2025-04-05  0:12 ` [PATCH v4 02/10] ASoC: tas2770: Support setting the PDM TX slot James Calligeros
2025-04-05  0:12 ` [PATCH v4 03/10] ASoC: tas2770: Set the SDOUT polarity correctly James Calligeros
2025-04-05  0:12 ` [PATCH v4 04/10] ASoC: tas2764: Reinit cache on part reset James Calligeros
2025-04-05  0:12 ` [PATCH v4 05/10] ASoC: tas2764: Enable main IRQs James Calligeros
2025-04-05  0:12 ` James Calligeros [this message]
2025-04-05  0:12 ` [PATCH v4 07/10] ASoC: tas2764: Raise regmap range maximum James Calligeros
2025-04-05  0:12 ` [PATCH v4 08/10] ASoC: tas2764: Apply Apple quirks James Calligeros
2025-04-05  0:12 ` [PATCH v4 09/10] ASoC: tas2770: expose die temp to hwmon James Calligeros
2025-04-05  0:12 ` [PATCH v4 10/10] ASoC: tas2764: " James Calligeros

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250405-apple-codec-changes-v4-6-d007e46ce4a2@gmail.com \
    --to=jcalligeros99@gmail.com \
    --cc=alyssa@rosenzweig.io \
    --cc=asahi@lists.linux.dev \
    --cc=baojun.xu@ti.com \
    --cc=broonie@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dmurphy@ti.com \
    --cc=jdelvare@suse.com \
    --cc=kevin-lu@ti.com \
    --cc=krzk+dt@kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-hwmon@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sound@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=marcan@marcan.st \
    --cc=neal@gompa.dev \
    --cc=perex@perex.cz \
    --cc=povik+lin@cutebit.org \
    --cc=robh@kernel.org \
    --cc=shenghao-ding@ti.com \
    --cc=shifu0704@thundersoft.com \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).