ATH10K Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: "Ralph Houthoofdt" <ralph@rora.be>
To: ath10k@lists.infradead.org
Subject: QCA9880 slow performance adhoc/IBSS mode
Date: Tue, 28 Feb 2017 17:51:14 +0100	[thread overview]
Message-ID: <00d001d291e2$dfb7d950$9f278bf0$@rora.be> (raw)

Dear all,

I’m currently doing me masters thesis on the subject of Wireless Mesh
Networks and how to optimize them for home use.
The devices I use are 5x PC Engine APU2c4 with 2x QCA9880 chip (Compex
WLE900VX). All of them are running LEDE (OpenWRT fork).

The problem I’m experiencing is the same as
http://lists.infradead.org/pipermail/ath10k/2017-January/009075.html . Using
the tips mentioned I did not come to a better performance. I’m thinking it’s
driver related..
When running iperf3 only one direction is running at a reasonable
throughput. Since I am using adhoc mode primarily I decided to use these
packages:
-	Kmod-ath10k-ct
-	Ath10k-firmware-qca988x-ct
Some sources on the internet said that using the Candela Tech drivers should
result in better support for adhoc/mesh networks.

As suggested in the other issue linked above, I switched TCP congestion
control to ‘Reno’ instead of the default ‘Cubic’. 
I also did try the command “iw reg set BE” since I am from Belgium, but
running “iw reg get” right after still gave me US as a result.

Let me know what additional command info I should post. Any help would be
greatly appreciated.

Iwconfig: 
adhoc0    IEEE 802.11  ESSID:"mesh"
          Mode:Ad-Hoc  Frequency:5.18 GHz  Cell: 02:CA:FE:CA:CA:40
          Tx-Power=20 dBm
          RTS thr:off   Fragment thr:off
          Encryption key:off
          Power Management:off


Iw reg get (I’m from Belgium):
global
country BE: DFS-ETSI
        (2402 - 2482 @ 40), (N/A, 20), (N/A)
        (5170 - 5250 @ 80), (N/A, 20), (N/A), AUTO-BW
        (5250 - 5330 @ 80), (N/A, 20), (0 ms), DFS, AUTO-BW
        (5490 - 5710 @ 160), (N/A, 27), (0 ms), DFS
        (57000 - 66000 @ 2160), (N/A, 40), (N/A)

phy#1
country US: DFS-FCC
        (2402 - 2472 @ 40), (N/A, 30), (N/A)
        (5170 - 5250 @ 80), (N/A, 23), (N/A), AUTO-BW
        (5250 - 5330 @ 80), (N/A, 23), (0 ms), DFS, AUTO-BW
        (5490 - 5730 @ 160), (N/A, 23), (0 ms), DFS
        (5735 - 5835 @ 80), (N/A, 30), (N/A)
        (57240 - 63720 @ 2160), (N/A, 40), (N/A)

phy#0
country US: DFS-FCC
        (2402 - 2472 @ 40), (N/A, 30), (N/A)
        (5170 - 5250 @ 80), (N/A, 23), (N/A), AUTO-BW
        (5250 - 5330 @ 80), (N/A, 23), (0 ms), DFS, AUTO-BW
        (5490 - 5730 @ 160), (N/A, 23), (0 ms), DFS
        (5735 - 5835 @ 80), (N/A, 30), (N/A)
        (57240 - 63720 @ 2160), (N/A, 40), (N/A)


Kind regards,
Met vriendelijke groeten,
Ralph Houthoofdt
Student industriële wetenschappen informatica


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

             reply	other threads:[~2017-02-28 16:51 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-02-28 16:51 Ralph Houthoofdt [this message]
2017-02-28 16:56 ` QCA9880 slow performance adhoc/IBSS mode Ben Greear
2017-02-28 17:36   ` Ralph Houthoofdt
2017-02-28 17:41     ` Ben Greear
2017-02-28 18:02       ` Ralph Houthoofdt
2017-02-28 18:11         ` Ben Greear
2017-02-28 21:48           ` Ralph Houthoofdt
2017-02-28 22:02             ` Ben Greear
2017-03-01  8:21               ` Ralph Houthoofdt
2017-03-01 14:50                 ` Ben Greear

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='00d001d291e2$dfb7d950$9f278bf0$@rora.be' \
    --to=ralph@rora.be \
    --cc=ath10k@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox