RE: ath10k firmware crash

voncken
2014-10-13T13:14:24Z

> >
> > Have you a benchmark reference with ATH10K ? at this time we can send
> around 700 Mbit/s, is it the maximum or we can expected better ?
>
> If this is OTA then this is pretty good. If this is cabled RF w/ attentuator
> it should be possible to get ~900mbps of UDP traffic with multiple streams on
> iperf. At least that's what I was getting on 10.1 firmware (on both AP and
> STA) last time I checked.
>
> Getting more than 700mbps OTA requires AP and STA antenna alignment voodoo.
>
I did some tests with a linksys WRT1900AC and I have ~950 mbps OTA easily.
>
> Michał
> --
> To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
> the body of a message to majordomo@vger.kernel.org More majordomo info at
> http://vger.kernel.org/majordomo-info.html