From: svp <s.pooheer@gmail.com>
To: Adrian Chadd <adrian@freebsd.org>
Cc: "ath10k@lists.infradead.org" <ath10k@lists.infradead.org>
Subject: Re: Compex WLE600VX firmware crash
Date: Mon, 7 Aug 2017 15:26:12 +0300 [thread overview]
Message-ID: <10eb580b-9c4f-d683-92ea-d058e6acb0d0@gmail.com> (raw)
In-Reply-To: <CAJ-VmonevTpU7DaJMujoy2Ko5GtzEQX-3F=1FO9SH3K7uWYqaw@mail.gmail.com>
On 05.08.2017 03:07, Adrian Chadd wrote:
> Hi,
>
> Is this being used as a STA? AP? What's it associating to? what
> channel, mode, etc
>
>
>
> -adrian
>
Hi!
The device was not initialized. Driver failed to set up network interface.
If then I try to start driver as modprobe ath10k_pci - result is the same -
firware crash.
More accurate dmesg log here:
[ 2.651496] ath10k_pci 0000:06:00.0: enabling device (0000 -> 0002)
[ 2.651731] ath10k_pci 0000:06:00.0: pci irq msi oper_irq_mode 2 irq_mode 0
reset_mode 0
[ 2.677241] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops
i915_audio_component_bind_ops [i915])
[ 2.688848] random: crng init done
[ 2.694209] input: HDA Intel HDMI HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:03.0/sound/card0/input17
[ 2.694237] input: HDA Intel HDMI HDMI/DP,pcm=7 as
/devices/pci0000:00/0000:00:03.0/sound/card0/input18
[ 2.694259] input: HDA Intel HDMI HDMI/DP,pcm=8 as
/devices/pci0000:00/0000:00:03.0/sound/card0/input19
[ 2.694280] input: HDA Intel HDMI HDMI/DP,pcm=9 as
/devices/pci0000:00/0000:00:03.0/sound/card0/input20
[ 2.719901] fbcon: inteldrmfb (fb0) is primary device
[ 2.763642] Console: switching to colour frame buffer device 240x75
[ 2.785165] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 2.808817] ath10k_pci 0000:06:00.0: qca988x hw2.0 target 0x4100016c chip_id
0x043222ff sub 0000:0000
[ 2.808818] ath10k_pci 0000:06:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs
0 testmode 0
[ 2.808960] ath10k_pci 0000:06:00.0: firmware ver 10.2.4.70.63-2 api 5
features no-p2p,raw-mode,mfp,allows-mesh-bcast crc32 4ff9e14d
[ 2.849225] ath10k_pci 0000:06:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08
[ 3.102190] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts:
data=ordered
[ 3.120930] nct6775: Enabling hardware monitor logical device mappings.
[ 3.120944] nct6775: Found NCT6791D or compatible chip at 0x2e:0x290
[ 3.403675] enp3s0: 0xffffa31883295000, 74:d0:2b:7e:f7:35, IRQ 30
[ 3.979192] ath10k_pci 0000:06:00.0: firmware crashed! (uuid
1773073a-6896-4834-91d4-6d0e9b026b06)
[ 3.979241] ath10k_pci 0000:06:00.0: qca988x hw2.0 target 0x4100016c chip_id
0x043222ff sub 0000:0000
[ 3.979244] ath10k_pci 0000:06:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs
0 testmode 0
[ 3.979456] ath10k_pci 0000:06:00.0: firmware ver 10.2.4.70.63-2 api 5
features no-p2p,raw-mode,mfp,allows-mesh-bcast crc32 4ff9e14d
[ 3.979461] ath10k_pci 0000:06:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08
[ 3.979463] ath10k_pci 0000:06:00.0: htt-ver 0.0 wmi-op 5 htt-op 2 cal otp
max-sta 128 raw 0 hwcrypto 1
[ 3.981477] ath10k_pci 0000:06:00.0: firmware register dump:
[ 3.981501] ath10k_pci 0000:06:00.0: [00]: 0x4100016C 0x000015B3 0x009BFF84
0x00955B31
[ 3.981530] ath10k_pci 0000:06:00.0: [04]: 0x009BFF84 0x00060130 0x00000013
0x00000000
[ 3.981559] ath10k_pci 0000:06:00.0: [08]: 0x009C8EA4 0x00007170 0x00000001
0x00435300
[ 3.981588] ath10k_pci 0000:06:00.0: [12]: 0x00000009 0x00000000 0x00958360
0x0095836B
[ 3.981616] ath10k_pci 0000:06:00.0: [16]: 0x00958080 0x0094078E 0x00000000
0x00000000
[ 3.981645] ath10k_pci 0000:06:00.0: [20]: 0x409BFF84 0x0040AB44 0x004101E0
0x0000000C
[ 3.981675] ath10k_pci 0000:06:00.0: [24]: 0x809BFE1C 0x0040ABA4 0x00000006
0xC09BFF84
[ 3.981703] ath10k_pci 0000:06:00.0: [28]: 0x8098E907 0x0040ABD4 0x009C8E7C
0x0000016B
[ 3.982735] ath10k_pci 0000:06:00.0: [32]: 0x8098FD3B 0x0040ABF4 0x004209EC
0x00420B0C
[ 3.983755] ath10k_pci 0000:06:00.0: [36]: 0x8098A7DA 0x0040AC34 0x00420AA0
0x004062DC
[ 3.984763] ath10k_pci 0000:06:00.0: [40]: 0x80988785 0x0040AC94 0x00410760
0x00400000
[ 3.985763] ath10k_pci 0000:06:00.0: [44]: 0x8098AEC8 0x0040AD44 0x00410760
0x00000001
[ 3.986752] ath10k_pci 0000:06:00.0: [48]: 0x809B67C4 0x0040AD84 0x00410760
0x00411344
[ 3.987740] ath10k_pci 0000:06:00.0: [52]: 0x809B293C 0x0040ADA4 0x00400000
0x00416FA4
[ 3.988723] ath10k_pci 0000:06:00.0: [56]: 0x809C0C3D 0x0040ADE4 0x0040AE08
0x00412118
[ 3.989700] ath10k_pci 0000:06:00.0: Copy Engine register dump:
[ 3.990684] ath10k_pci 0000:06:00.0: [00]: 0x00057400 0 0 3 3
[ 3.991670] ath10k_pci 0000:06:00.0: [01]: 0x00057800 3 3 8 9
[ 3.992652] ath10k_pci 0000:06:00.0: [02]: 0x00057c00 1 1 0 1
[ 3.993628] ath10k_pci 0000:06:00.0: [03]: 0x00058000 1 1 2 1
[ 3.994587] ath10k_pci 0000:06:00.0: [04]: 0x00058400 0 0 40 0
[ 3.995529] ath10k_pci 0000:06:00.0: [05]: 0x00058800 0 0 0 0
[ 3.996454] ath10k_pci 0000:06:00.0: [06]: 0x00058c00 0 0 0 0
[ 3.997359] ath10k_pci 0000:06:00.0: [07]: 0x00059000 0 0 0 0
[ 5.501878] r8168: enp3s0: link up
[ 7.630654] usb 3-13: device descriptor read/64, error -110
[ 9.010685] ath10k_pci 0000:06:00.0: wmi unified ready event not received
[ 9.082483] ath10k_pci 0000:06:00.0: could not init core (-110)
[ 9.083167] ath10k_pci 0000:06:00.0: could not probe fw (-110)
[ 9.097304] ath10k_pci 0000:06:00.0: cannot restart a device that hasn't been
started
Sergey
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
next prev parent reply other threads:[~2017-08-07 12:26 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-04 17:18 Compex WLE600VX firmware crash svp
2017-08-05 0:07 ` Adrian Chadd
2017-08-07 12:26 ` svp [this message]
2017-08-07 17:42 ` Ben Greear
2017-08-07 19:47 ` Richard Toy
2017-08-07 19:52 ` Adrian Chadd
2017-08-07 20:06 ` Richard Toy
2017-08-07 20:19 ` Adrian Chadd
2017-08-07 20:44 ` Richard Toy
2017-08-07 20:57 ` Adrian Chadd
-- strict thread matches above, loose matches on Subject: below --
2017-09-02 9:52 Nuno Oliveira
[not found] ` <CAJ-VmokZ6kzRwEmHOyYZL4m12jr4t_yMumXTf8MiJ7E6aGb7ZA@mail.gmail.com>
2017-09-02 17:04 ` Adrian Chadd
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=10eb580b-9c4f-d683-92ea-d058e6acb0d0@gmail.com \
--to=s.pooheer@gmail.com \
--cc=adrian@freebsd.org \
--cc=ath10k@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox