From: Joerg Pommnitz <pommnitz@yahoo.com>
To: Kalle Valo <kvalo@qca.qualcomm.com>
Cc: "ath10k@lists.infradead.org" <ath10k@lists.infradead.org>
Subject: Re: Yesterdays kernel/git/kvalo/ath.git failes with COMPEX WLE600VX
Date: Fri, 20 Nov 2015 13:31:04 +0000 (UTC) [thread overview]
Message-ID: <1137895868.8098680.1448026264465.JavaMail.yahoo@mail.yahoo.com> (raw)
In-Reply-To: <87a8q8uco7.fsf@kamboji.qca.qualcomm.com>
[-- Attachment #1: Type: text/plain, Size: 1789 bytes --]
Kalle,
attached are dmesg logs from 3.18.24 and your git tree. The patch from your mail is _NOT_ yet applied.
BTW, patch gives an offset of 99 lines when applying to your git tree. Is this relative to a branch?
--
Regards Joerg
> Kalle Valo <kvalo@qca.qualcomm.com> schrieb am 12:34 Freitag, 20.November 2015:
> > Joerg Pommnitz <pommnitz@yahoo.com> writes:
>
>
>> Hello all,
>> Kalles current git tree fails to initialize my COMPEX WLE600VX. The kernel
> log shows
>> [ 16.373978] ath10k_pci 0000:05:00.0: failed to wake up device : -110
>> [ 16.374118] ath10k_pci: probe of 0000:05:00.0 failed with error -110
>
> Can you send full dmesg, right from the beginning of the boot, please?
> It might give some hints.
>
> I have a similar problem in one of my laptop (lenovo thinkpad x230). The
> patch below helps with that one, but I haven't investigated it more yet.
>
> --- a/drivers/net/wireless/ath/ath10k/pci.c
> +++ b/drivers/net/wireless/ath/ath10k/pci.c
> @@ -2811,6 +2811,18 @@ static int ath10k_pci_claim(struct ath10k *ar)
>
> pci_set_drvdata(pdev, ar);
>
> + /*
> + * Without any knowledge of the Host, the Target may have been
> reset or
> + * power cycled and its Config Space may no longer reflect the
> PCI
> + * address space that was assigned earlier by the PCI
> infrastructure.
> + * Refresh it now.
> + */
> + ret = pci_assign_resource(pdev, BAR_NUM);
> + if (ret) {
> + ath10k_err(ar, "failed to assign PCI space: %d\n",
> ret);
> + return ret;
> + }
> +
> ret = pci_enable_device(pdev);
> if (ret) {
> ath10k_err(ar, "failed to enable pci device:
> %d\n",
> ret);
>
>
> --
> Kalle Valo
>
[-- Attachment #2: 3.18.24.log --]
[-- Type: application/octet-stream, Size: 39844 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.18.24-wifirouter-5492M (pommnitz@wifirouter-devel-007) (gcc version 4.8.4 (Ubuntu 4.8.4-2ubuntu1~14.04) ) #3 Tue Nov 17 17:19:19 CET 2015
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Disabled fast string operations
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003eeeffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000003eef0000-0x000000003eefffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] SMBIOS 2.2 present.
[ 0.000000] DMI: embedded-logic DESIGN & MORE i855-W83627HF/ , BIOS 6.00 PG 03/20/2008
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x3eef0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CBFFF write-protect
[ 0.000000] CC000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 03F000000 mask FFF000000 uncachable
[ 0.000000] 2 base 03FF00000 mask FFFF00000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 1GB, type WB
[ 0.000000] reg 1, base: 1008MB, range: 16MB, type UC
[ 0.000000] reg 2, base: 1023MB, range: 1MB, type WB
[ 0.000000] total RAM covered: 1008M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 32M num_reg: 2 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 1GB, type WB
[ 0.000000] reg 1, base: 1008MB, range: 16MB, type UC
[ 0.000000] Warning only 895MB will be used.
[ 0.000000] Use a HIGHMEM enabled kernel.
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x37800000-0x37bfffff]
[ 0.000000] [mem 0x37800000-0x37bfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x30000000-0x377fffff]
[ 0.000000] [mem 0x30000000-0x377fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x2fffffff]
[ 0.000000] [mem 0x00100000-0x003fffff] page 4k
[ 0.000000] [mem 0x00400000-0x2fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x37c00000-0x37fa0fff]
[ 0.000000] [mem 0x37c00000-0x37fa0fff] page 4k
[ 0.000000] BRK [0x018f4000, 0x018f4fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x3e83b000-0x3eeeffff]
[ 0.000000] Allocated new RAMDISK: [mem 0x378ec000-0x37fa03c1]
[ 0.000000] Move RAMDISK from [mem 0x3e83b000-0x3eeef3c1] to [mem 0x378ec000-0x37fa03c1]
[ 0.000000] 895MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 37fa1000
[ 0.000000] low ram: 0 - 37fa1000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x37fa0fff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x3eeeffff]
[ 0.000000] Initmem setup node 0 [mem 0x00001000-0x3eeeffff]
[ 0.000000] On node 0 totalpages: 229183
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 225185 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] Reserving Intel graphics stolen memory at 0x3ef00000-0x3fefffff
[ 0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org
[ 0.000000] Found and enabled local APIC!
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] e820: [mem 0x3ff00000-0xfebfffff] available for PCI devices
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227391
[ 0.000000] Kernel command line: BOOT_IMAGE=3.18 ro root=801 console=ttyS0,38400 console=tty0 libata.dma=0 acpi=off root=/dev/sda1
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Memory: 891572K/916732K available (5269K kernel code, 543K rwdata, 2280K rodata, 632K init, 400K bss, 25160K reserved)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfffa3000 - 0xfffff000 ( 368 kB)
[ 0.000000] vmalloc : 0xf87a1000 - 0xfffa1000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf7fa1000 ( 895 MB)
[ 0.000000] .init : 0xc17ea000 - 0xc1888000 ( 632 kB)
[ 0.000000] .data : 0xc1525982 - 0xc17e8c40 (2828 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1525982 (5270 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:2304 nr_irqs:24 0
[ 0.000000] CPU 0 irqstacks, hard=f6c08000 soft=f6c0a000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] allocated 1835008 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1000.047 MHz processor
[ 0.012015] Calibrating delay loop (skipped), value calculated using timer frequency.. 2000.09 BogoMIPS (lpj=4000188)
[ 0.020004] pid_max: default: 32768 minimum: 301
[ 0.024080] Security Framework initialized
[ 0.028031] Smack: Initializing.
[ 0.032027] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.036006] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.040491] Initializing cgroup subsys memory
[ 0.044024] Initializing cgroup subsys devices
[ 0.048009] Initializing cgroup subsys freezer
[ 0.052008] Initializing cgroup subsys net_cls
[ 0.056007] Initializing cgroup subsys blkio
[ 0.060006] Initializing cgroup subsys perf_event
[ 0.064007] Initializing cgroup subsys net_prio
[ 0.068007] Initializing cgroup subsys hugetlb
[ 0.072052] Disabled fast string operations
[ 0.076013] mce: CPU supports 5 MCE banks
[ 0.080018] CPU0: Thermal monitoring enabled (TM1)
[ 0.084020] Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2
[ 0.084020] Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8, 1GB 0
[ 0.088003] CPU: Intel(R) Celeron(R) M processor 1.00GHz (fam: 06, model: 0d, stepping: 08)
[ 0.104153] ftrace: allocating 23017 entries in 45 pages
[ 0.124217] Performance Events: p6 PMU driver.
[ 0.132007] ... version: 0
[ 0.136003] ... bit width: 32
[ 0.140003] ... generic registers: 2
[ 0.144003] ... value mask: 00000000ffffffff
[ 0.148003] ... max period: 000000007fffffff
[ 0.152003] ... fixed-purpose events: 0
[ 0.156003] ... event mask: 0000000000000003
[ 0.167023] Enabling APIC mode: Flat. Using 0 I/O APICs
[ 0.276043] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.280227] devtmpfs: initialized
[ 0.290361] pinctrl core: initialized pinctrl subsystem
[ 0.292228] regulator-dummy: no parameters
[ 0.296084] RTC time: 15:16:09, date: 11/20/15
[ 0.300298] NET: Registered protocol family 16
[ 0.304397] cpuidle: using governor ladder
[ 0.308007] cpuidle: using governor menu
[ 0.338233] PCI: PCI BIOS revision 2.10 entry at 0xfb110, last bus=6
[ 0.340002] PCI: Using configuration type 1 for base access
[ 0.349750] ACPI: Interpreter disabled.
[ 0.352156] vgaarb: loaded
[ 0.356231] SCSI subsystem initialized
[ 0.360081] libata version 3.00 loaded.
[ 0.360221] usbcore: registered new interface driver usbfs
[ 0.364039] usbcore: registered new interface driver hub
[ 0.368030] usbcore: registered new device driver usb
[ 0.372164] PCI: Probing PCI hardware
[ 0.376011] PCI: root bus 00: using default resources
[ 0.376015] PCI: Probing PCI hardware (bus 00)
[ 0.376108] PCI host bridge to bus 0000:00
[ 0.380010] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.384005] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[ 0.388004] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 0.392020] pci 0000:00:00.0: [8086:3580] type 00 class 0x060000
[ 0.392172] pci 0000:00:00.1: [8086:3584] type 00 class 0x088000
[ 0.392303] pci 0000:00:00.3: [8086:3585] type 00 class 0x088000
[ 0.396110] pci 0000:00:02.0: [8086:3582] type 00 class 0x030000
[ 0.396127] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe7ffffff pref]
[ 0.396138] pci 0000:00:02.0: reg 0x14: [mem 0xe8600000-0xe867ffff]
[ 0.396148] pci 0000:00:02.0: reg 0x18: [io 0xe900-0xe907]
[ 0.396186] pci 0000:00:02.0: supports D1
[ 0.396267] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.400000] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.400026] pci 0000:00:02.1: [8086:3582] type 00 class 0x038000
[ 0.400039] pci 0000:00:02.1: reg 0x10: [mem 0x00000000-0x07ffffff pref]
[ 0.400048] pci 0000:00:02.1: reg 0x14: [mem 0x00000000-0x0007ffff]
[ 0.400084] pci 0000:00:02.1: supports D1
[ 0.400218] pci 0000:00:1d.0: [8086:24c2] type 00 class 0x0c0300
[ 0.400265] pci 0000:00:1d.0: reg 0x20: [io 0xeb00-0xeb1f]
[ 0.400388] pci 0000:00:1d.1: [8086:24c4] type 00 class 0x0c0300
[ 0.400435] pci 0000:00:1d.1: reg 0x20: [io 0xed00-0xed1f]
[ 0.400554] pci 0000:00:1d.2: [8086:24c7] type 00 class 0x0c0300
[ 0.400600] pci 0000:00:1d.2: reg 0x20: [io 0xe800-0xe81f]
[ 0.400739] pci 0000:00:1d.7: [8086:24cd] type 00 class 0x0c0320
[ 0.400762] pci 0000:00:1d.7: reg 0x10: [mem 0xe8680000-0xe86803ff]
[ 0.400849] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.400977] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060400
[ 0.401109] pci 0000:00:1f.0: [8086:24c0] type 00 class 0x060100
[ 0.401116] * The chipset may have PM-Timer Bug. Due to workarounds for a bug,
[ 0.401116] * this clock source is slow. If you are sure your timer does not have
[ 0.401116] * this bug, please use "acpi_pm_good" to disable the workaround
[ 0.404071] pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH4 ACPI/GPIO/TCO
[ 0.408007] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH4 GPIO
[ 0.412112] pci 0000:00:1f.1: [8086:24cb] type 00 class 0x01018a
[ 0.412131] pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007]
[ 0.412143] pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003]
[ 0.412156] pci 0000:00:1f.1: reg 0x18: [io 0x0000-0x0007]
[ 0.412169] pci 0000:00:1f.1: reg 0x1c: [io 0x0000-0x0003]
[ 0.412182] pci 0000:00:1f.1: reg 0x20: [io 0xf000-0xf00f]
[ 0.412195] pci 0000:00:1f.1: reg 0x24: [mem 0x00000000-0x000003ff]
[ 0.412211] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.416005] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.420004] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.424004] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.428109] pci 0000:00:1f.3: [8086:24c3] type 00 class 0x0c0500
[ 0.428156] pci 0000:00:1f.3: reg 0x20: [io 0x0500-0x051f]
[ 0.428365] pci 0000:01:04.0: [12d8:e111] type 01 class 0x060400
[ 0.428565] pci 0000:01:04.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.432019] pci 0000:01:05.0: [168c:001b] type 00 class 0x020000
[ 0.432040] pci 0000:01:05.0: reg 0x10: [mem 0xe8400000-0xe840ffff]
[ 0.432203] pci 0000:01:04.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.436042] pci 0000:01:08.0: [8086:103a] type 00 class 0x020000
[ 0.436066] pci 0000:01:08.0: reg 0x10: [mem 0xe8410000-0xe8410fff]
[ 0.436079] pci 0000:01:08.0: reg 0x14: [io 0xd000-0xd03f]
[ 0.436145] pci 0000:01:08.0: supports D1 D2
[ 0.436151] pci 0000:01:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.436301] pci 0000:01:04.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.440032] pci 0000:00:1e.0: PCI bridge to [bus 01-06] (subtractive decode)
[ 0.444007] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
[ 0.444015] pci 0000:00:1e.0: bridge window [mem 0xe8000000-0xe85fffff]
[ 0.444023] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.444029] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[ 0.444176] pci 0000:02:00.0: [104c:8232] type 01 class 0x060400
[ 0.444372] pci 0000:02:00.0: supports D1 D2
[ 0.444377] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.444555] pci 0000:01:04.0: PCI bridge to [bus 02-06]
[ 0.448013] pci 0000:01:04.0: bridge window [mem 0xe8000000-0xe83fffff]
[ 0.448218] pci 0000:03:00.0: [104c:8233] type 01 class 0x060400
[ 0.448418] pci 0000:03:00.0: supports D1 D2
[ 0.448423] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.448607] pci 0000:03:01.0: [104c:8233] type 01 class 0x060400
[ 0.448807] pci 0000:03:01.0: supports D1 D2
[ 0.448813] pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.449003] pci 0000:03:02.0: [104c:8233] type 01 class 0x060400
[ 0.449200] pci 0000:03:02.0: supports D1 D2
[ 0.449205] pci 0000:03:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.449433] pci 0000:02:00.0: PCI bridge to [bus 03-06]
[ 0.452022] pci 0000:02:00.0: bridge window [mem 0xe8000000-0xe83fffff]
[ 0.452192] pci 0000:03:00.0: PCI bridge to [bus 04]
[ 0.456228] pci 0000:05:00.0: [168c:003c] type 00 class 0x028000
[ 0.456276] pci 0000:05:00.0: reg 0x10: [mem 0xe8000000-0xe81fffff 64bit]
[ 0.456387] pci 0000:05:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 0.456502] pci 0000:05:00.0: supports D1 D2
[ 0.456622] pci 0000:03:01.0: PCI bridge to [bus 05]
[ 0.460021] pci 0000:03:01.0: bridge window [mem 0xe8000000-0xe83fffff]
[ 0.460198] pci 0000:03:02.0: PCI bridge to [bus 06]
[ 0.464097] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 06
[ 0.464189] pci 0000:00:1f.0: PIIX/ICH IRQ router [8086:24c0]
[ 0.468030] PCI: setting IRQ 5 as level-triggered
[ 0.468036] pci 0000:00:1f.1: found PCI INT A -> IRQ 5
[ 0.472013] pci 0000:00:1f.1: sharing IRQ 5 with 0000:00:1d.2
[ 0.476049] PCI: pci_cache_line_size set to 64 bytes
[ 0.476127] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.476133] e820: reserve RAM buffer [mem 0x3eef0000-0x3fffffff]
[ 0.476468] NetLabel: Initializing
[ 0.480004] NetLabel: domain hash size = 128
[ 0.484002] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.488031] NetLabel: unlabeled traffic allowed by default
[ 0.492317] Switched to clocksource refined-jiffies
[ 0.515532] pnp: PnP ACPI: disabled
[ 0.523366] pci 0000:03:00.0: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
[ 0.523379] pci 0000:03:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000
[ 0.523387] pci 0000:03:00.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000
[ 0.523411] pci 0000:03:01.0: bridge window [io 0x1000-0x0fff] to [bus 05] add_size 1000
[ 0.523419] pci 0000:03:01.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000
[ 0.523458] pci 0000:03:00.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.523465] pci 0000:03:01.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.523473] pci 0000:02:00.0: bridge window [io 0x1000-0x0fff] to [bus 03-06] add_size 2000
[ 0.523480] pci 0000:03:00.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.523487] pci 0000:03:01.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.523495] pci 0000:02:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03-06] add_size 400000
[ 0.523509] pci 0000:02:00.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 2000
[ 0.523516] pci 0000:01:04.0: bridge window [io 0x1000-0x0fff] to [bus 02-06] add_size 2000
[ 0.523523] pci 0000:02:00.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 400000
[ 0.523531] pci 0000:01:04.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02-06] add_size 400000
[ 0.523541] pci 0000:01:04.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 400000
[ 0.523549] pci 0000:00:1e.0: bridge window [mem 0x00100000-0x000fffff pref] to [bus 01-06] add_size 400000
[ 0.523568] pci 0000:00:1e.0: res[15]=[mem 0x00100000-0x000fffff pref] get_res_add_size add_size 400000
[ 0.523582] pci 0000:00:02.1: BAR 0: assigned [mem 0x40000000-0x47ffffff pref]
[ 0.524015] pci 0000:00:1e.0: BAR 15: assigned [mem 0x48000000-0x483fffff pref]
[ 0.528008] pci 0000:00:02.1: BAR 1: assigned [mem 0x48400000-0x4847ffff]
[ 0.532010] pci 0000:00:1f.1: BAR 5: assigned [mem 0x48480000-0x484803ff]
[ 0.536016] pci 0000:01:04.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 400000
[ 0.536022] pci 0000:01:04.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 2000
[ 0.536030] pci 0000:01:04.0: BAR 15: assigned [mem 0x48000000-0x483fffff 64bit pref]
[ 0.540012] pci 0000:01:04.0: BAR 13: assigned [io 0x1000-0x2fff]
[ 0.544012] pci 0000:02:00.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 400000
[ 0.544018] pci 0000:02:00.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 2000
[ 0.544025] pci 0000:02:00.0: BAR 15: assigned [mem 0x48000000-0x483fffff 64bit pref]
[ 0.548008] pci 0000:02:00.0: BAR 13: assigned [io 0x1000-0x2fff]
[ 0.552015] pci 0000:03:00.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.552021] pci 0000:03:00.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.552028] pci 0000:03:01.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.552034] pci 0000:03:00.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.552040] pci 0000:03:01.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.552047] pci 0000:03:00.0: BAR 14: no space for [mem size 0x00200000]
[ 0.556009] pci 0000:03:00.0: BAR 14: failed to assign [mem size 0x00200000]
[ 0.560011] pci 0000:03:00.0: BAR 15: assigned [mem 0x48000000-0x481fffff 64bit pref]
[ 0.564010] pci 0000:03:01.0: BAR 15: assigned [mem 0x48200000-0x483fffff 64bit pref]
[ 0.568010] pci 0000:03:00.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.572010] pci 0000:03:01.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.576013] pci 0000:03:00.0: BAR 14: no space for [mem size 0x00200000]
[ 0.580010] pci 0000:03:00.0: BAR 14: failed to assign [mem size 0x00200000]
[ 0.584011] pci 0000:03:00.0: PCI bridge to [bus 04]
[ 0.588013] pci 0000:03:00.0: bridge window [io 0x1000-0x1fff]
[ 0.592025] pci 0000:03:00.0: bridge window [mem 0x48000000-0x481fffff 64bit pref]
[ 0.596024] pci 0000:05:00.0: BAR 6: assigned [mem 0xe8200000-0xe820ffff pref]
[ 0.600011] pci 0000:03:01.0: PCI bridge to [bus 05]
[ 0.604014] pci 0000:03:01.0: bridge window [io 0x2000-0x2fff]
[ 0.608020] pci 0000:03:01.0: bridge window [mem 0xe8000000-0xe83fffff]
[ 0.612017] pci 0000:03:01.0: bridge window [mem 0x48200000-0x483fffff 64bit pref]
[ 0.616023] pci 0000:03:02.0: PCI bridge to [bus 06]
[ 0.620036] pci 0000:02:00.0: PCI bridge to [bus 03-06]
[ 0.624015] pci 0000:02:00.0: bridge window [io 0x1000-0x2fff]
[ 0.628021] pci 0000:02:00.0: bridge window [mem 0xe8000000-0xe83fffff]
[ 0.632019] pci 0000:02:00.0: bridge window [mem 0x48000000-0x483fffff 64bit pref]
[ 0.636023] pci 0000:01:04.0: PCI bridge to [bus 02-06]
[ 0.640014] pci 0000:01:04.0: bridge window [io 0x1000-0x2fff]
[ 0.644017] pci 0000:01:04.0: bridge window [mem 0xe8000000-0xe83fffff]
[ 0.648017] pci 0000:01:04.0: bridge window [mem 0x48000000-0x483fffff 64bit pref]
[ 0.652019] pci 0000:00:1e.0: PCI bridge to [bus 01-06]
[ 0.656016] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
[ 0.660018] pci 0000:00:1e.0: bridge window [mem 0xe8000000-0xe85fffff]
[ 0.664034] pci 0000:00:1e.0: bridge window [mem 0x48000000-0x483fffff pref]
[ 0.668023] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.668029] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[ 0.668036] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.668042] pci_bus 0000:01: resource 1 [mem 0xe8000000-0xe85fffff]
[ 0.668048] pci_bus 0000:01: resource 2 [mem 0x48000000-0x483fffff pref]
[ 0.668053] pci_bus 0000:01: resource 4 [io 0x0000-0xffff]
[ 0.668059] pci_bus 0000:01: resource 5 [mem 0x00000000-0xffffffff]
[ 0.668065] pci_bus 0000:02: resource 0 [io 0x1000-0x2fff]
[ 0.668071] pci_bus 0000:02: resource 1 [mem 0xe8000000-0xe83fffff]
[ 0.668077] pci_bus 0000:02: resource 2 [mem 0x48000000-0x483fffff 64bit pref]
[ 0.668083] pci_bus 0000:03: resource 0 [io 0x1000-0x2fff]
[ 0.668089] pci_bus 0000:03: resource 1 [mem 0xe8000000-0xe83fffff]
[ 0.668095] pci_bus 0000:03: resource 2 [mem 0x48000000-0x483fffff 64bit pref]
[ 0.668102] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff]
[ 0.668108] pci_bus 0000:04: resource 2 [mem 0x48000000-0x481fffff 64bit pref]
[ 0.668114] pci_bus 0000:05: resource 0 [io 0x2000-0x2fff]
[ 0.668119] pci_bus 0000:05: resource 1 [mem 0xe8000000-0xe83fffff]
[ 0.668125] pci_bus 0000:05: resource 2 [mem 0x48200000-0x483fffff 64bit pref]
[ 0.668208] NET: Registered protocol family 2
[ 0.672505] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.676060] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.680059] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.684082] TCP: reno registered
[ 0.688019] UDP hash table entries: 512 (order: 1, 8192 bytes)
[ 0.692026] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
[ 0.696123] NET: Registered protocol family 1
[ 0.700066] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.700087] PCI: setting IRQ 10 as level-triggered
[ 0.700094] pci 0000:00:1d.0: found PCI INT A -> IRQ 10
[ 0.704022] pci 0000:00:1d.0: sharing IRQ 10 with 0000:00:02.0
[ 0.708033] pci 0000:00:1d.0: sharing IRQ 10 with 0000:01:04.0
[ 0.712061] PCI: setting IRQ 9 as level-triggered
[ 0.712067] pci 0000:00:1d.1: found PCI INT B -> IRQ 9
[ 0.716076] pci 0000:00:1d.2: found PCI INT C -> IRQ 5
[ 0.720032] pci 0000:00:1d.2: sharing IRQ 5 with 0000:00:1f.1
[ 0.724062] PCI: setting IRQ 3 as level-triggered
[ 0.724068] pci 0000:00:1d.7: found PCI INT D -> IRQ 3
[ 0.728210] pci 0000:01:08.0: Firmware left e100 interrupts enabled; disabling
[ 0.732044] PCI: CLS 32 bytes, default 64
[ 0.732160] Trying to unpack rootfs image as initramfs...
[ 1.135794] Freeing initrd memory: 6868K (f78ec000 - f7fa1000)
[ 1.136399] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 1.140151] microcode: CPU0 sig=0x6d8, pf=0x20, revision=0x0
[ 1.144205] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.148117] Scanning for low memory corruption every 60 seconds
[ 1.152801] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 1.156066] Initialise system trusted keyring
[ 1.160103] audit: initializing netlink subsys (disabled)
[ 1.164083] audit: type=2000 audit(1448032568.164:1): initialized
[ 1.168687] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.178208] zpool: loaded
[ 1.180051] zbud: loaded
[ 1.184237] VFS: Disk quotas dquot_6.5.2
[ 1.188177] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.193354] fuse init (API version 7.23)
[ 1.196335] msgmni has been set to 1754
[ 1.200221] Key type big_key registered
[ 1.204672] Key type asymmetric registered
[ 1.208071] Asymmetric key parser 'x509' registered
[ 1.212087] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.220098] io scheduler noop registered
[ 1.224058] io scheduler deadline registered (default)
[ 1.228162] io scheduler cfq registered
[ 1.232348] pci 0000:01:04.0: found PCI INT A -> IRQ 10
[ 1.236058] pci 0000:01:04.0: sharing IRQ 10 with 0000:00:02.0
[ 1.240053] pci 0000:01:04.0: sharing IRQ 10 with 0000:00:1d.0
[ 1.244255] pcieport 0000:03:00.0: irq 16 for MSI/MSI-X
[ 1.244477] pcieport 0000:03:01.0: irq 17 for MSI/MSI-X
[ 1.244821] intel_idle: does not run on family 6 model 13
[ 1.245156] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.252056] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.265978] brd: module loaded
[ 1.273248] loop: module loaded
[ 1.276270] ata_piix 0000:00:1f.1: version 2.13
[ 1.276297] ata_piix 0000:00:1f.1: found PCI INT A -> IRQ 5
[ 1.280068] ata_piix 0000:00:1f.1: sharing IRQ 5 with 0000:00:1d.2
[ 1.285019] scsi host0: ata_piix
[ 1.288284] scsi host1: ata_piix
[ 1.292194] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 1.296055] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 1.300436] libphy: Fixed MDIO Bus: probed
[ 1.304099] ata2: port disabled--ignoring
[ 1.304120] tun: Universal TUN/TAP device driver, 1.6
[ 1.308054] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.312211] PPP generic driver version 2.4.2
[ 1.316210] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.320077] ehci-pci: EHCI PCI platform driver
[ 1.324094] ehci-pci 0000:00:1d.7: found PCI INT D -> IRQ 3
[ 1.328133] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 1.332067] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.340309] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 1.340328] ehci-pci 0000:00:1d.7: irq 3, io mem 0xe8680000
[ 1.356068] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.360173] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.364060] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.368059] usb usb1: Product: EHCI Host Controller
[ 1.372059] usb usb1: Manufacturer: Linux 3.18.24-wifirouter-5492M ehci_hcd
[ 1.376059] usb usb1: SerialNumber: 0000:00:1d.7
[ 1.384303] hub 1-0:1.0: USB hub found
[ 1.388075] hub 1-0:1.0: 6 ports detected
[ 1.396102] ehci-platform: EHCI generic platform driver
[ 1.400092] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.404071] ohci-pci: OHCI PCI platform driver
[ 1.408093] ohci-platform: OHCI generic platform driver
[ 1.412084] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.416118] uhci_hcd 0000:00:1d.0: found PCI INT A -> IRQ 10
[ 1.420068] uhci_hcd 0000:00:1d.0: sharing IRQ 10 with 0000:00:02.0
[ 1.424076] uhci_hcd 0000:00:1d.0: sharing IRQ 10 with 0000:01:04.0
[ 1.428096] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.432071] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.436072] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 1.440086] uhci_hcd 0000:00:1d.0: irq 10, io base 0x0000eb00
[ 1.444162] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.448065] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.452064] usb usb2: Product: UHCI Host Controller
[ 1.456067] usb usb2: Manufacturer: Linux 3.18.24-wifirouter-5492M uhci_hcd
[ 1.460065] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.464583] hub 2-0:1.0: USB hub found
[ 1.468079] hub 2-0:1.0: 2 ports detected
[ 1.472332] ata1.00: CFA: InnoDisk Corp. - EDC4000 1GB, 081107, max UDMA/66
[ 1.476067] ata1.00: 2047248 sectors, multi 2: LBA
[ 1.480070] ata1.00: limited to UDMA/33 due to 40-wire cable
[ 1.484462] uhci_hcd 0000:00:1d.1: found PCI INT B -> IRQ 9
[ 1.488119] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.492129] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.496286] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 1.500089] uhci_hcd 0000:00:1d.1: irq 9, io base 0x0000ed00
[ 1.504218] ata1.00: configured for PIO4
[ 1.508250] scsi 0:0:0:0: Direct-Access ATA InnoDisk Corp. - 07 PQ: 0 ANSI: 5
[ 1.512191] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.516070] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.520069] usb usb3: Product: UHCI Host Controller
[ 1.524069] usb usb3: Manufacturer: Linux 3.18.24-wifirouter-5492M uhci_hcd
[ 1.528069] usb usb3: SerialNumber: 0000:00:1d.1
[ 1.532475] sd 0:0:0:0: [sda] 2047248 512-byte logical blocks: (1.04 GB/999 MiB)
[ 1.536234] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.540158] sd 0:0:0:0: [sda] Write Protect is off
[ 1.544072] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.544247] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 1.549354] sda: sda1 sda2
[ 1.556157] hub 3-0:1.0: USB hub found
[ 1.560103] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.564084] hub 3-0:1.0: 2 ports detected
[ 1.568342] uhci_hcd 0000:00:1d.2: found PCI INT C -> IRQ 5
[ 1.572088] uhci_hcd 0000:00:1d.2: sharing IRQ 5 with 0000:00:1f.1
[ 1.576108] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.580081] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.584126] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 1.588096] uhci_hcd 0000:00:1d.2: irq 5, io base 0x0000e800
[ 1.592171] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.596076] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.600074] usb usb4: Product: UHCI Host Controller
[ 1.604074] usb usb4: Manufacturer: Linux 3.18.24-wifirouter-5492M uhci_hcd
[ 1.608073] usb usb4: SerialNumber: 0000:00:1d.2
[ 1.612519] hub 4-0:1.0: USB hub found
[ 1.616113] hub 4-0:1.0: 2 ports detected
[ 1.620436] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.880423] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.884624] TCP: cubic registered
[ 1.888467] NET: Registered protocol family 10
[ 1.896120] NET: Registered protocol family 17
[ 1.900115] Key type dns_resolver registered
[ 1.904549] Using IPI Shortcut mode
[ 1.908417] Loading compiled-in X.509 certificates
[ 1.926412] usb 2-1: new low-speed USB device number 2 using uhci_hcd
[ 1.928776] Loaded X.509 cert 'Magrathea: Glacier signing key: dc54ad1627cbfa95b57a862c79b22b8909496b64'
[ 1.932143] registered taskstats version 1
[ 1.943429] Key type trusted registered
[ 1.954769] Key type encrypted registered
[ 1.956646] Magic number: 7:843:285
[ 1.960205] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.964095] EDD information not available.
[ 1.968237] PM: Hibernation image not present or could not be loaded.
[ 1.968773] Freeing unused kernel memory: 632K (c17ea000 - c1888000)
[ 1.972163] Write protecting the kernel text: 5272k
[ 1.976173] Write protecting the kernel read-only data: 2284k
[ 2.016387] systemd-udevd[94]: starting version 204
[ 2.114222] usb 2-1: New USB device found, idVendor=413c, idProduct=2107
[ 2.116117] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.120114] usb 2-1: Product: Dell USB Entry Keyboard
[ 2.124106] usb 2-1: Manufacturer: DELL
[ 2.140768] Switched to clocksource tsc
[ 2.234200] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 2.253051] e100: Copyright(c) 1999-2006 Intel Corporation
[ 2.345508] PCI: setting IRQ 11 as level-triggered
[ 2.345523] e100 0000:01:08.0: found PCI INT A -> IRQ 11
[ 2.462005] e100 0000:01:08.0 eth0: addr 0xe8410000, irq 11, MAC addr 00:16:27:00:90:fa
[ 2.629677] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.689187] usbcore: registered new interface driver usbhid
[ 2.705939] usbhid: USB HID core driver
[ 2.733859] input: DELL Dell USB Entry Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/0003:413C:2107.0001/input/input1
[ 2.770374] hid-generic 0003:413C:2107.0001: input,hidraw0: USB HID v1.11 Keyboard [DELL Dell USB Entry Keyboard] on usb-0000:00:1d.0-1/input0
[ 4.011836] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[ 4.033935] EXT4-fs (sda1): write access will be enabled during recovery
[ 5.189778] random: nonblocking pool is initialized
[ 5.347085] EXT4-fs (sda1): recovery complete
[ 5.381344] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 7.728389] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 7.761754] systemd-udevd[304]: starting version 204
[ 9.099205] e100 0000:01:08.0 lan1: renamed from eth0
[ 9.101708] systemd-udevd[335]: renamed network interface eth0 to lan1
[ 9.334981] wlan: module verification failed: signature and/or required key missing - tainting kernel
[ 9.807238] intel_rng: FWH not detected
[ 11.074377] PCI: setting IRQ 15 as level-triggered
[ 11.074392] ath_pci 0000:01:05.0: found PCI INT A -> IRQ 15
[ 11.074418] ath_pci 0000:01:05.0: sharing IRQ 15 with 0000:00:1f.3
[ 11.652190] cfg80211: Calling CRDA to update world regulatory domain
[ 11.652227] cfg80211: World regulatory domain updated:
[ 11.652231] cfg80211: DFS Master region: unset
[ 11.652234] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 11.652240] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 11.652246] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 11.652251] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 11.652257] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 11.652263] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 11.652269] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 11.652274] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 11.652279] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 12.729298] init: failsafe main process (430) killed by TERM signal
[ 13.411298] NET: Registered protocol family 15
[ 14.111818] MadWifi: ath_attach: Switching rfkill capability off.
[ 14.282594] wifi0: Atheros AR5413 chip found (MAC 10.4, PHY SChip 6.1, Radio 6.3)
[ 14.330869] ath_pci: wifi0: Atheros 5413: mem=0xe8400000, irq=15
[ 14.358625] ath_pci 0000:01:05.0 radio: renamed from ath0
[ 14.359155] systemd-udevd[327]: renamed network interface ath0 to radio
[ 14.877230] ath10k_pci 0000:05:00.0: irq 18 for MSI/MSI-X
[ 14.877272] ath10k_pci 0000:05:00.0: pci irq msi interrupts 1 irq_mode 0 reset_mode 0
[ 15.190944] ath10k_pci 0000:05:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/firmware-3.bin failed with error -2
[ 15.190954] ath10k_pci 0000:05:00.0: Falling back to user helper
[ 15.193255] ath10k_pci 0000:05:00.0: could not fetch firmware file 'ath10k/QCA988X/hw2.0/firmware-3.bin': -11
[ 15.402697] ath10k_pci 0000:05:00.0: Unknown FW IE: 30
[ 17.031120] ath10k_pci 0000:05:00.0: qca988x hw2.0 (0x4100016c, 0x043222ff) fw 10.1.467-ct-com-full-015-7e95dc api 2 htt 2.1
[ 17.031132] ath10k_pci 0000:05:00.0: debug 1 debugfs 1 tracing 1 dfs 0 testmode 0
[ 17.571860] ath: EEPROM regdomain: 0x0
[ 17.571869] ath: EEPROM indicates default country code should be used
[ 17.571872] ath: doing EEPROM country->regdmn map search
[ 17.571876] ath: country maps to regdmn code: 0x3a
[ 17.571880] ath: Country alpha2 being used: 00
[ 17.571883] ath: Regpair used: 0x3a
[ 17.607408] ath10k_pci 0000:05:00.0 ap: renamed from wlan0
[ 17.607986] systemd-udevd[324]: renamed network interface wlan0 to ap
[ 19.021998] IPv6: ADDRCONF(NETDEV_UP): ap: link is not ready
[ 19.049627] IPv6: ADDRCONF(NETDEV_UP): lan1: link is not ready
[ 23.472647] _x_.dummy: renamed from dummy0
[ 23.473042] systemd-udevd[954]: renamed network interface dummy0 to _x_.dummy
[ 23.859708] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 24.132228] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 24.137671] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 24.153273] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 24.566352] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 24.622084] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 24.629088] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 26.702408] init: plymouth-upstart-bridge main process ended, respawning
[ 26.974924] softdog: Software Watchdog Timer: 0.08 initialized. soft_noboot=1 soft_margin=60 sec soft_panic=0 (nowayout=0)
[ 28.820930] u32 classifier
[ 28.820940] Actions configured
[ 29.625860] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 29.784609] xt_HIMONN_VLAN: module license 'Proprietary' taints kernel.
[ 29.784617] Disabling lock debugging due to kernel taint
[ 31.402721] device radio entered promiscuous mode
[ 34.430096] IPv6: ADDRCONF(NETDEV_UP): ap: link is not ready
[ 36.149412] IPv6: ADDRCONF(NETDEV_UP): ap: link is not ready
[ 38.449431] IPv6: ADDRCONF(NETDEV_UP): ap: link is not ready
[ 38.499699] IPv6: ADDRCONF(NETDEV_CHANGE): ap: link becomes ready
[ 43.165088] IPv6: ADDRCONF(NETDEV_UP): ap: link is not ready
[ 45.076533] IPv6: ADDRCONF(NETDEV_UP): ap: link is not ready
[ 45.128966] IPv6: ADDRCONF(NETDEV_CHANGE): ap: link becomes ready
[ 45.693496] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 45.749085] EXT4-fs (sda2): re-mounted. Opts: (null)
[-- Attachment #3: 4.3.0.log --]
[-- Type: application/octet-stream, Size: 38045 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.3.0-wl-ath-wifirouter-5492M (pommnitz@wifirouter-devel-007) (gcc version 4.8.4 (Ubuntu 4.8.4-2ubuntu1~14.04) ) #1 Fri Nov 20 13:23:51 CET 2015
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Disabled fast string operations
[ 0.000000] x86/fpu: Legacy x87 FPU detected.
[ 0.000000] x86/fpu: Using 'lazy' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003eeeffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000003eef0000-0x000000003eefffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] SMBIOS 2.2 present.
[ 0.000000] DMI: embedded-logic DESIGN & MORE i855-W83627HF/ , BIOS 6.00 PG 03/20/2008
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x3eef0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CBFFF write-protect
[ 0.000000] CC000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 03F000000 mask FFF000000 uncachable
[ 0.000000] 2 base 03FF00000 mask FFFF00000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: PAT not supported by CPU.
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 1GB, type WB
[ 0.000000] reg 1, base: 1008MB, range: 16MB, type UC
[ 0.000000] reg 2, base: 1023MB, range: 1MB, type WB
[ 0.000000] total RAM covered: 1008M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 32M num_reg: 2 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 1GB, type WB
[ 0.000000] reg 1, base: 1008MB, range: 16MB, type UC
[ 0.000000] Warning only 895MB will be used.
[ 0.000000] Use a HIGHMEM enabled kernel.
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x37800000-0x37bfffff]
[ 0.000000] [mem 0x37800000-0x37bfffff] page 4M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x377fffff]
[ 0.000000] [mem 0x00100000-0x003fffff] page 4k
[ 0.000000] [mem 0x00400000-0x377fffff] page 4M
[ 0.000000] init_memory_mapping: [mem 0x37c00000-0x37fa0fff]
[ 0.000000] [mem 0x37c00000-0x37fa0fff] page 4k
[ 0.000000] BRK [0x0197b000, 0x0197bfff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x3e82e000-0x3eeeffff]
[ 0.000000] Allocated new RAMDISK: [mem 0x378df000-0x37fa0748]
[ 0.000000] Move RAMDISK from [mem 0x3e82e000-0x3eeef748] to [mem 0x378df000-0x37fa0748]
[ 0.000000] 895MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 37fa1000
[ 0.000000] low ram: 0 - 37fa1000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] Normal [mem 0x0000000001000000-0x0000000037fa0fff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000003eeeffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000003eeeffff]
[ 0.000000] On node 0 totalpages: 229183
[ 0.000000] DMA zone: 40 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 2200 pages used for memmap
[ 0.000000] Normal zone: 225185 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] Reserving Intel graphics stolen memory at 0x3ef00000-0x3fefffff
[ 0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org
[ 0.000000] Found and enabled local APIC!
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] e820: [mem 0x3ff00000-0xfebfffff] available for PCI devices
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 226943
[ 0.000000] Kernel command line: BOOT_IMAGE=4.3.0 ro root=801 console=ttyS0,38400 console=tty0 libata.dma=0 acpi=off root=/dev/sda1
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Memory: 888932K/916732K available (5635K kernel code, 646K rwdata, 2336K rodata, 640K init, 404K bss, 27800K reserved, 0K cma-reserved)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfffa3000 - 0xfffff000 ( 368 kB)
[ 0.000000] vmalloc : 0xf87a1000 - 0xfffa1000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf7fa1000 ( 895 MB)
[ 0.000000] .init : 0xc186e000 - 0xc190e000 ( 640 kB)
[ 0.000000] .data : 0xc1581200 - 0xc186ca40 (2990 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1581200 (5636 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:2304 nr_irqs:32 16
[ 0.000000] CPU 0 irqstacks, hard=f6832000 soft=f6834000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1000.040 MHz processor
[ 0.012011] Calibrating delay loop (skipped), value calculated using timer frequency.. 2000.08 BogoMIPS (lpj=4000160)
[ 0.020004] pid_max: default: 32768 minimum: 301
[ 0.024047] Security Framework initialized
[ 0.028017] Smack: Initializing.
[ 0.032003] Smack: IPv6 port labeling enabled.
[ 0.036032] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.040005] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.044463] Initializing cgroup subsys io
[ 0.048016] Initializing cgroup subsys memory
[ 0.052020] Initializing cgroup subsys devices
[ 0.056007] Initializing cgroup subsys freezer
[ 0.060007] Initializing cgroup subsys net_cls
[ 0.064007] Initializing cgroup subsys perf_event
[ 0.068006] Initializing cgroup subsys net_prio
[ 0.072006] Initializing cgroup subsys hugetlb
[ 0.076039] Disabled fast string operations
[ 0.080011] mce: CPU supports 5 MCE banks
[ 0.084015] CPU0: Thermal monitoring enabled (TM1)
[ 0.088015] Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2
[ 0.092004] Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8, 1GB 0
[ 0.096003] CPU: Intel(R) Celeron(R) M processor 1.00GHz (family: 0x6, model: 0xd, stepping: 0x8)
[ 0.112351] ftrace: allocating 24092 entries in 48 pages
[ 0.132223] Performance Events: p6 PMU driver.
[ 0.140006] ... version: 0
[ 0.144003] ... bit width: 32
[ 0.148003] ... generic registers: 2
[ 0.152003] ... value mask: 00000000ffffffff
[ 0.156003] ... max period: 000000007fffffff
[ 0.160003] ... fixed-purpose events: 0
[ 0.164003] ... event mask: 0000000000000003
[ 0.172774] Enabling APIC mode: Flat. Using 0 I/O APICs
[ 0.284046] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.288193] devtmpfs: initialized
[ 0.292887] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.296173] pinctrl core: initialized pinctrl subsystem
[ 0.300306] RTC time: 15:21:40, date: 11/20/15
[ 0.304309] NET: Registered protocol family 16
[ 0.308392] cpuidle: using governor ladder
[ 0.312008] cpuidle: using governor menu
[ 0.340057] PCI: PCI BIOS revision 2.10 entry at 0xfb110, last bus=6
[ 0.344002] PCI: Using configuration type 1 for base access
[ 0.355534] ACPI: Interpreter disabled.
[ 0.356174] vgaarb: loaded
[ 0.360232] SCSI subsystem initialized
[ 0.364081] libata version 3.00 loaded.
[ 0.364213] usbcore: registered new interface driver usbfs
[ 0.368040] usbcore: registered new interface driver hub
[ 0.372033] usbcore: registered new device driver usb
[ 0.376190] PCI: Probing PCI hardware
[ 0.380009] PCI: root bus 00: using default resources
[ 0.380014] PCI: Probing PCI hardware (bus 00)
[ 0.380108] PCI host bridge to bus 0000:00
[ 0.384008] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.388005] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[ 0.392004] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 0.396037] pci 0000:00:00.0: [8086:3580] type 00 class 0x060000
[ 0.396215] pci 0000:00:00.1: [8086:3584] type 00 class 0x088000
[ 0.396351] pci 0000:00:00.3: [8086:3585] type 00 class 0x088000
[ 0.396494] pci 0000:00:02.0: [8086:3582] type 00 class 0x030000
[ 0.396514] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe7ffffff pref]
[ 0.396525] pci 0000:00:02.0: reg 0x14: [mem 0xe8600000-0xe867ffff]
[ 0.396535] pci 0000:00:02.0: reg 0x18: [io 0xe900-0xe907]
[ 0.396569] pci 0000:00:02.0: supports D1
[ 0.396652] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.400000] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.400025] pci 0000:00:02.1: [8086:3582] type 00 class 0x038000
[ 0.400042] pci 0000:00:02.1: reg 0x10: [mem 0x00000000-0x07ffffff pref]
[ 0.400051] pci 0000:00:02.1: reg 0x14: [mem 0x00000000-0x0007ffff]
[ 0.400082] pci 0000:00:02.1: supports D1
[ 0.400214] pci 0000:00:1d.0: [8086:24c2] type 00 class 0x0c0300
[ 0.400264] pci 0000:00:1d.0: reg 0x20: [io 0xeb00-0xeb1f]
[ 0.400388] pci 0000:00:1d.1: [8086:24c4] type 00 class 0x0c0300
[ 0.400437] pci 0000:00:1d.1: reg 0x20: [io 0xed00-0xed1f]
[ 0.400557] pci 0000:00:1d.2: [8086:24c7] type 00 class 0x0c0300
[ 0.400606] pci 0000:00:1d.2: reg 0x20: [io 0xe800-0xe81f]
[ 0.400742] pci 0000:00:1d.7: [8086:24cd] type 00 class 0x0c0320
[ 0.400771] pci 0000:00:1d.7: reg 0x10: [mem 0xe8680000-0xe86803ff]
[ 0.400846] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.400979] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060400
[ 0.401118] pci 0000:00:1f.0: [8086:24c0] type 00 class 0x060100
[ 0.401126] * The chipset may have PM-Timer Bug. Due to workarounds for a bug,
[ 0.401126] * this clock source is slow. If you are sure your timer does not have
[ 0.401126] * this bug, please use "acpi_pm_good" to disable the workaround
[ 0.404071] pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH4 ACPI/GPIO/TCO
[ 0.408007] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH4 GPIO
[ 0.412113] pci 0000:00:1f.1: [8086:24cb] type 00 class 0x01018a
[ 0.412134] pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007]
[ 0.412147] pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003]
[ 0.412160] pci 0000:00:1f.1: reg 0x18: [io 0x0000-0x0007]
[ 0.412172] pci 0000:00:1f.1: reg 0x1c: [io 0x0000-0x0003]
[ 0.412185] pci 0000:00:1f.1: reg 0x20: [io 0xf000-0xf00f]
[ 0.412198] pci 0000:00:1f.1: reg 0x24: [mem 0x00000000-0x000003ff]
[ 0.412215] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.416005] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.420004] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.424004] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.428111] pci 0000:00:1f.3: [8086:24c3] type 00 class 0x0c0500
[ 0.428161] pci 0000:00:1f.3: reg 0x20: [io 0x0500-0x051f]
[ 0.428373] pci 0000:01:04.0: [12d8:e111] type 01 class 0x060400
[ 0.428550] pci 0000:01:04.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.432017] pci 0000:01:05.0: [168c:001b] type 00 class 0x020000
[ 0.432043] pci 0000:01:05.0: reg 0x10: [mem 0xe8400000-0xe840ffff]
[ 0.432204] pci 0000:01:04.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.436018] pci 0000:01:08.0: [8086:103a] type 00 class 0x020000
[ 0.436042] pci 0000:01:08.0: reg 0x10: [mem 0xe8410000-0xe8410fff]
[ 0.436054] pci 0000:01:08.0: reg 0x14: [io 0xd000-0xd03f]
[ 0.436108] pci 0000:01:08.0: supports D1 D2
[ 0.436113] pci 0000:01:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.436233] pci 0000:01:04.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.440031] pci 0000:00:1e.0: PCI bridge to [bus 01-06] (subtractive decode)
[ 0.444007] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
[ 0.444015] pci 0000:00:1e.0: bridge window [mem 0xe8000000-0xe85fffff]
[ 0.444023] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.444029] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[ 0.444154] pci 0000:02:00.0: [104c:8232] type 01 class 0x060400
[ 0.444318] pci 0000:02:00.0: supports D1 D2
[ 0.444323] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.444495] pci 0000:01:04.0: PCI bridge to [bus 02-06]
[ 0.448012] pci 0000:01:04.0: bridge window [mem 0xe8000000-0xe83fffff]
[ 0.448179] pci 0000:03:00.0: [104c:8233] type 01 class 0x060400
[ 0.448350] pci 0000:03:00.0: supports D1 D2
[ 0.448355] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.448503] pci 0000:02:00.0: PCI bridge to [bus 03-06]
[ 0.452021] pci 0000:02:00.0: bridge window [mem 0xe8000000-0xe83fffff]
[ 0.452239] pci 0000:03:00.0: PCI bridge to [bus 04]
[ 0.456075] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 06
[ 0.456096] PCI: Discovered peer bus 05
[ 0.460003] PCI: root bus 05: using default resources
[ 0.460013] PCI: Probing PCI hardware (bus 05)
[ 0.460104] PCI host bridge to bus 0000:05
[ 0.464005] pci_bus 0000:05: root bus resource [io 0x0000-0xffff]
[ 0.468005] pci_bus 0000:05: root bus resource [mem 0x00000000-0xffffffff]
[ 0.472004] pci_bus 0000:05: No busn resource found for root bus, will use [bus 05-ff]
[ 0.476006] pci_bus 0000:05: busn_res: can not insert [bus 05-ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-06])
[ 0.476047] pci 0000:05:00.0: [168c:003c] type 00 class 0x028000
[ 0.476125] pci 0000:05:00.0: reg 0x10: [mem 0xe8000000-0xe81fffff 64bit]
[ 0.476234] pci 0000:05:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 0.476291] pci 0000:05:00.0: supports D1 D2
[ 0.476492] pci_bus 0000:05: busn_res: [bus 05-ff] end is updated to 05
[ 0.476500] pci_bus 0000:05: busn_res: can not insert [bus 05] under domain [bus 00-ff] (conflicts with (null) [bus 00-06])
[ 0.476659] pci 0000:00:1f.0: PIIX/ICH IRQ router [8086:24c0]
[ 0.480029] PCI: setting IRQ 5 as level-triggered
[ 0.480036] pci 0000:00:1f.1: found PCI INT A -> IRQ 5
[ 0.484013] pci 0000:00:1f.1: sharing IRQ 5 with 0000:00:1d.2
[ 0.488037] PCI: pci_cache_line_size set to 64 bytes
[ 0.488080] pci 0000:05:00.0: can't claim BAR 0 [mem 0xe8000000-0xe81fffff 64bit]: address conflict with PCI Bus 0000:01 [mem 0xe8000000-0xe85fffff]
[ 0.492031] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.492037] e820: reserve RAM buffer [mem 0x3eef0000-0x3fffffff]
[ 0.492391] NetLabel: Initializing
[ 0.496004] NetLabel: domain hash size = 128
[ 0.500002] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.504034] NetLabel: unlabeled traffic allowed by default
[ 0.512125] clocksource: Switched to clocksource refined-jiffies
[ 0.540725] pnp: PnP ACPI: disabled
[ 0.552907] pci 0000:03:00.0: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
[ 0.552919] pci 0000:03:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
[ 0.552927] pci 0000:03:00.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000 add_align 100000
[ 0.552951] pci 0000:03:00.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.552958] pci 0000:02:00.0: bridge window [io 0x1000-0x0fff] to [bus 03-06] add_size 1000
[ 0.552966] pci 0000:03:00.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.552973] pci 0000:03:00.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.552981] pci 0000:02:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03-06] add_size 200000 add_align 100000
[ 0.552996] pci 0000:02:00.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.553003] pci 0000:01:04.0: bridge window [io 0x1000-0x0fff] to [bus 02-06] add_size 1000
[ 0.553011] pci 0000:02:00.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.553018] pci 0000:02:00.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.553026] pci 0000:01:04.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02-06] add_size 200000 add_align 100000
[ 0.553036] pci 0000:01:04.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.553043] pci 0000:01:04.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.553053] pci 0000:00:1e.0: bridge window [mem 0x00100000-0x000fffff pref] to [bus 01-06] add_size 200000 add_align 100000
[ 0.553072] pci 0000:00:1e.0: res[15]=[mem 0x00100000-0x000fffff pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.553079] pci 0000:00:1e.0: res[15]=[mem 0x00100000-0x002fffff pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.553093] pci 0000:00:02.1: BAR 0: assigned [mem 0x40000000-0x47ffffff pref]
[ 0.556013] pci 0000:00:1e.0: BAR 15: assigned [mem 0x48000000-0x481fffff pref]
[ 0.560009] pci 0000:00:02.1: BAR 1: assigned [mem 0x48200000-0x4827ffff]
[ 0.564010] pci 0000:00:1f.1: BAR 5: assigned [mem 0x48280000-0x482803ff]
[ 0.568016] pci 0000:01:04.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.568023] pci 0000:01:04.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.568030] pci 0000:01:04.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.568037] pci 0000:01:04.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.568044] pci 0000:01:04.0: BAR 15: assigned [mem 0x48000000-0x481fffff 64bit pref]
[ 0.572012] pci 0000:01:04.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.576013] pci 0000:02:00.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.576020] pci 0000:02:00.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.576027] pci 0000:02:00.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.576033] pci 0000:02:00.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.576040] pci 0000:02:00.0: BAR 15: assigned [mem 0x48000000-0x481fffff 64bit pref]
[ 0.580010] pci 0000:02:00.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.584014] pci 0000:03:00.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[ 0.584020] pci 0000:03:00.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[ 0.584028] pci 0000:03:00.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.584034] pci 0000:03:00.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.584041] pci 0000:03:00.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.584048] pci 0000:03:00.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.584054] pci 0000:03:00.0: BAR 14: assigned [mem 0xe8000000-0xe81fffff]
[ 0.588010] pci 0000:03:00.0: BAR 15: assigned [mem 0x48000000-0x481fffff 64bit pref]
[ 0.592010] pci 0000:03:00.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.596011] pci 0000:03:00.0: PCI bridge to [bus 04]
[ 0.600013] pci 0000:03:00.0: bridge window [io 0x1000-0x1fff]
[ 0.604019] pci 0000:03:00.0: bridge window [mem 0xe8000000-0xe81fffff]
[ 0.608016] pci 0000:03:00.0: bridge window [mem 0x48000000-0x481fffff 64bit pref]
[ 0.612021] pci 0000:02:00.0: PCI bridge to [bus 03-06]
[ 0.616013] pci 0000:02:00.0: bridge window [io 0x1000-0x1fff]
[ 0.620036] pci 0000:02:00.0: bridge window [mem 0xe8000000-0xe83fffff]
[ 0.624017] pci 0000:02:00.0: bridge window [mem 0x48000000-0x481fffff 64bit pref]
[ 0.628023] pci 0000:01:04.0: PCI bridge to [bus 02-06]
[ 0.632013] pci 0000:01:04.0: bridge window [io 0x1000-0x1fff]
[ 0.636016] pci 0000:01:04.0: bridge window [mem 0xe8000000-0xe83fffff]
[ 0.640015] pci 0000:01:04.0: bridge window [mem 0x48000000-0x481fffff 64bit pref]
[ 0.644018] pci 0000:00:1e.0: PCI bridge to [bus 01-06]
[ 0.648014] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
[ 0.652016] pci 0000:00:1e.0: bridge window [mem 0xe8000000-0xe85fffff]
[ 0.656016] pci 0000:00:1e.0: bridge window [mem 0x48000000-0x481fffff pref]
[ 0.660021] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.660027] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[ 0.660033] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.660039] pci_bus 0000:01: resource 1 [mem 0xe8000000-0xe85fffff]
[ 0.660044] pci_bus 0000:01: resource 2 [mem 0x48000000-0x481fffff pref]
[ 0.660050] pci_bus 0000:01: resource 4 [io 0x0000-0xffff]
[ 0.660055] pci_bus 0000:01: resource 5 [mem 0x00000000-0xffffffff]
[ 0.660061] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 0.660066] pci_bus 0000:02: resource 1 [mem 0xe8000000-0xe83fffff]
[ 0.660072] pci_bus 0000:02: resource 2 [mem 0x48000000-0x481fffff 64bit pref]
[ 0.660077] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
[ 0.660083] pci_bus 0000:03: resource 1 [mem 0xe8000000-0xe83fffff]
[ 0.660088] pci_bus 0000:03: resource 2 [mem 0x48000000-0x481fffff 64bit pref]
[ 0.660094] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff]
[ 0.660100] pci_bus 0000:04: resource 1 [mem 0xe8000000-0xe81fffff]
[ 0.660105] pci_bus 0000:04: resource 2 [mem 0x48000000-0x481fffff 64bit pref]
[ 0.660123] pci 0000:05:00.0: BAR 0: assigned [mem 0x48400000-0x485fffff 64bit]
[ 0.664037] pci 0000:05:00.0: BAR 6: assigned [mem 0x48290000-0x4829ffff pref]
[ 0.668016] pci_bus 0000:05: resource 4 [io 0x0000-0xffff]
[ 0.668021] pci_bus 0000:05: resource 5 [mem 0x00000000-0xffffffff]
[ 0.668108] NET: Registered protocol family 2
[ 0.672449] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.676059] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.680057] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.684086] UDP hash table entries: 512 (order: 1, 8192 bytes)
[ 0.688025] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
[ 0.692121] NET: Registered protocol family 1
[ 0.696061] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.696300] pci 0000:01:08.0: Firmware left e100 interrupts enabled; disabling
[ 0.700033] PCI: CLS 32 bytes, default 64
[ 0.700168] Trying to unpack rootfs image as initramfs...
[ 1.107982] Freeing initrd memory: 6920K (f78df000 - f7fa1000)
[ 1.108402] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 1.112187] microcode: CPU0 sig=0x6d8, pf=0x20, revision=0x0
[ 1.116195] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.120122] Scanning for low memory corruption every 60 seconds
[ 1.124817] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 1.128099] audit: initializing netlink subsys (disabled)
[ 1.132090] audit: type=2000 audit(1448032899.132:1): initialized
[ 1.136512] Initialise system trusted keyring
[ 1.140212] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.150838] zbud: loaded
[ 1.152225] VFS: Disk quotas dquot_6.6.0
[ 1.156171] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.164973] fuse init (API version 7.23)
[ 1.168533] Key type big_key registered
[ 1.172844] Key type asymmetric registered
[ 1.176071] Asymmetric key parser 'x509' registered
[ 1.180186] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.184109] io scheduler noop registered
[ 1.188056] io scheduler deadline registered (default)
[ 1.192154] io scheduler cfq registered
[ 1.196308] PCI: setting IRQ 10 as level-triggered
[ 1.196318] pcieport 0000:01:04.0: found PCI INT A -> IRQ 10
[ 1.200054] pcieport 0000:01:04.0: sharing IRQ 10 with 0000:00:02.0
[ 1.204050] pcieport 0000:01:04.0: sharing IRQ 10 with 0000:00:1d.0
[ 1.208461] intel_idle: does not run on family 6 model 13
[ 1.208829] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.216054] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.230864] brd: module loaded
[ 1.235648] loop: module loaded
[ 1.236259] ata_piix 0000:00:1f.1: found PCI INT A -> IRQ 5
[ 1.240064] ata_piix 0000:00:1f.1: sharing IRQ 5 with 0000:00:1d.2
[ 1.244097] ata_piix 0000:00:1f.1: version 2.13
[ 1.245079] scsi host0: ata_piix
[ 1.248289] scsi host1: ata_piix
[ 1.252186] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 1.256051] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 1.260429] libphy: Fixed MDIO Bus: probed
[ 1.264091] ata2: port disabled--ignoring
[ 1.264111] tun: Universal TUN/TAP device driver, 1.6
[ 1.268050] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.272216] PPP generic driver version 2.4.2
[ 1.276256] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.280063] ehci-pci: EHCI PCI platform driver
[ 1.284079] PCI: setting IRQ 3 as level-triggered
[ 1.284086] ehci-pci 0000:00:1d.7: found PCI INT D -> IRQ 3
[ 1.288128] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 1.292063] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.302813] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 1.302831] ehci-pci 0000:00:1d.7: irq 3, io mem 0xe8680000
[ 1.316063] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.320166] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.324056] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.328055] usb usb1: Product: EHCI Host Controller
[ 1.332055] usb usb1: Manufacturer: Linux 4.3.0-wl-ath-wifirouter-5492M ehci_hcd
[ 1.336055] usb usb1: SerialNumber: 0000:00:1d.7
[ 1.340400] hub 1-0:1.0: USB hub found
[ 1.344068] hub 1-0:1.0: 6 ports detected
[ 1.348493] ehci-platform: EHCI generic platform driver
[ 1.352085] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.356065] ohci-pci: OHCI PCI platform driver
[ 1.360087] ohci-platform: OHCI generic platform driver
[ 1.364083] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.368106] uhci_hcd 0000:00:1d.0: found PCI INT A -> IRQ 10
[ 1.372063] uhci_hcd 0000:00:1d.0: sharing IRQ 10 with 0000:00:02.0
[ 1.376072] uhci_hcd 0000:00:1d.0: sharing IRQ 10 with 0000:01:04.0
[ 1.380089] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.384067] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.388065] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 1.392083] uhci_hcd 0000:00:1d.0: irq 10, io base 0x0000eb00
[ 1.396165] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.400061] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.404060] usb usb2: Product: UHCI Host Controller
[ 1.408060] usb usb2: Manufacturer: Linux 4.3.0-wl-ath-wifirouter-5492M uhci_hcd
[ 1.412060] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.416587] hub 2-0:1.0: USB hub found
[ 1.420074] hub 2-0:1.0: 2 ports detected
[ 1.424331] ata1.00: CFA: InnoDisk Corp. - EDC4000 1GB, 081107, max UDMA/66
[ 1.428063] ata1.00: 2047248 sectors, multi 2: LBA
[ 1.432066] ata1.00: limited to UDMA/33 due to 40-wire cable
[ 1.436457] PCI: setting IRQ 9 as level-triggered
[ 1.436466] uhci_hcd 0000:00:1d.1: found PCI INT B -> IRQ 9
[ 1.440112] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.444071] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.448322] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 1.452087] uhci_hcd 0000:00:1d.1: irq 9, io base 0x0000ed00
[ 1.456216] ata1.00: configured for PIO4
[ 1.460235] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.464066] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.468064] usb usb3: Product: UHCI Host Controller
[ 1.472064] usb usb3: Manufacturer: Linux 4.3.0-wl-ath-wifirouter-5492M uhci_hcd
[ 1.476064] usb usb3: SerialNumber: 0000:00:1d.1
[ 1.480231] scsi 0:0:0:0: Direct-Access ATA InnoDisk Corp. - 07 PQ: 0 ANSI: 5
[ 1.484463] sd 0:0:0:0: [sda] 2047248 512-byte logical blocks: (1.04 GB/999 MiB)
[ 1.488244] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.492152] sd 0:0:0:0: [sda] Write Protect is off
[ 1.496068] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.496247] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 1.501321] sda: sda1 sda2
[ 1.504852] hub 3-0:1.0: USB hub found
[ 1.508170] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.512081] hub 3-0:1.0: 2 ports detected
[ 1.516344] uhci_hcd 0000:00:1d.2: found PCI INT C -> IRQ 5
[ 1.520084] uhci_hcd 0000:00:1d.2: sharing IRQ 5 with 0000:00:1f.1
[ 1.524102] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.528077] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.532074] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 1.536138] uhci_hcd 0000:00:1d.2: irq 5, io base 0x0000e800
[ 1.540165] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.544070] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.548071] usb usb4: Product: UHCI Host Controller
[ 1.552070] usb usb4: Manufacturer: Linux 4.3.0-wl-ath-wifirouter-5492M uhci_hcd
[ 1.556069] usb usb4: SerialNumber: 0000:00:1d.2
[ 1.560517] hub 4-0:1.0: USB hub found
[ 1.564109] hub 4-0:1.0: 2 ports detected
[ 1.568419] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.828418] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.836373] NET: Registered protocol family 10
[ 1.840573] NET: Registered protocol family 17
[ 1.844122] Key type dns_resolver registered
[ 1.848557] Using IPI Shortcut mode
[ 1.852479] registered taskstats version 1
[ 1.856110] Loading compiled-in X.509 certificates
[ 1.874813] Loaded X.509 cert 'Build time autogenerated kernel key: aa49002e6f51308e9d725a6578a022887126c191'
[ 1.876107] usb 2-1: new low-speed USB device number 2 using uhci_hcd
[ 1.880140] zswap: loaded using pool lzo/zbud
[ 1.889120] Key type trusted registered
[ 1.900510] Key type encrypted registered
[ 1.904543] Magic number: 7:946:386
[ 1.912112] usb usb4: hash matches
[ 1.916181] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.920090] EDD information not available.
[ 1.924223] PM: Hibernation image not present or could not be loaded.
[ 1.924790] Freeing unused kernel memory: 640K (c186e000 - c190e000)
[ 1.928195] Write protecting the kernel text: 5640k
[ 1.932171] Write protecting the kernel read-only data: 2340k
[ 1.972385] systemd-udevd[115]: starting version 204
[ 2.068158] usb 2-1: New USB device found, idVendor=413c, idProduct=2107
[ 2.072113] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.076110] usb 2-1: Product: Dell USB Entry Keyboard
[ 2.080102] usb 2-1: Manufacturer: DELL
[ 2.108483] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0xe6a3ce4f0d, max_idle_ns: 440795252659 ns
[ 2.116329] clocksource: Switched to clocksource tsc
[ 2.209187] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 2.228108] e100: Copyright(c) 1999-2006 Intel Corporation
[ 2.376115] PCI: setting IRQ 11 as level-triggered
[ 2.376129] e100 0000:01:08.0: found PCI INT A -> IRQ 11
[ 2.549348] e100 0000:01:08.0 eth0: addr 0xe8410000, irq 11, MAC addr 00:16:27:00:90:fa
[ 2.586364] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.648587] usbcore: registered new interface driver usbhid
[ 2.665347] usbhid: USB HID core driver
[ 2.693339] input: DELL Dell USB Entry Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/0003:413C:2107.0001/input/input1
[ 2.784200] hid-generic 0003:413C:2107.0001: input,hidraw0: USB HID v1.11 Keyboard [DELL Dell USB Entry Keyboard] on usb-0000:00:1d.0-1/input0
[ 4.024583] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 4.690131] random: nonblocking pool is initialized
[ 6.393329] systemd-udevd[325]: starting version 204
[ 6.399369] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 7.692600] e100 0000:01:08.0 lan1: renamed from eth0
[ 7.694297] systemd-udevd[345]: renamed network interface eth0 to lan1
[ 8.231442] intel_rng: FWH not detected
[ 10.166662] init: failsafe main process (449) killed by TERM signal
[ 10.416293] cfg80211: World regulatory domain updated:
[ 10.416303] cfg80211: DFS Master region: unset
[ 10.416307] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 10.416313] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 10.416318] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 10.416323] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 10.416329] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 10.416336] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 10.416341] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 10.416346] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 10.416350] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 10.735534] NET: Registered protocol family 15
[ 12.024446] ath10k_pci 0000:05:00.0: failed to wake up device : -110
[ 12.045345] ath10k_pci: probe of 0000:05:00.0 failed with error -110
[ 29.736886] usb 1-4: new high-speed USB device number 3 using ehci-pci
[ 29.872832] usb 1-4: New USB device found, idVendor=0951, idProduct=1665
[ 29.872858] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 29.872864] usb 1-4: Product: DataTraveler 2.0
[ 29.872870] usb 1-4: Manufacturer: Kingston
[ 29.872875] usb 1-4: SerialNumber: 001A928EED05FE1069495FD8
[ 30.075775] usb-storage 1-4:1.0: USB Mass Storage device detected
[ 30.084529] scsi host2: usb-storage 1-4:1.0
[ 30.085321] usbcore: registered new interface driver usb-storage
[ 30.142051] usbcore: registered new interface driver uas
[ 31.113045] scsi 2:0:0:0: Direct-Access Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 4
[ 31.118593] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 31.119259] sd 2:0:0:0: [sdb] 15131636 512-byte logical blocks: (7.74 GB/7.21 GiB)
[ 31.119877] sd 2:0:0:0: [sdb] Write Protect is off
[ 31.119889] sd 2:0:0:0: [sdb] Mode Sense: 45 00 00 00
[ 31.121144] sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 31.125879] sdb: sdb1
[ 31.128397] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 31.550698] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 38.528625] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[-- Attachment #4: Type: text/plain, Size: 146 bytes --]
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
next prev parent reply other threads:[~2015-11-20 13:31 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1749993920.7465237.1447934318588.JavaMail.yahoo.ref@mail.yahoo.com>
2015-11-19 11:58 ` Yesterdays kernel/git/kvalo/ath.git failes with COMPEX WLE600VX Joerg Pommnitz
2015-11-20 11:34 ` Kalle Valo
2015-11-20 13:31 ` Joerg Pommnitz [this message]
2015-11-25 12:21 ` Kalle Valo
2015-11-20 13:49 ` Joerg Pommnitz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1137895868.8098680.1448026264465.JavaMail.yahoo@mail.yahoo.com \
--to=pommnitz@yahoo.com \
--cc=ath10k@lists.infradead.org \
--cc=kvalo@qca.qualcomm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox