From: greearb@candelatech.com
To: ath10k@lists.infradead.org
Cc: Ben Greear <greearb@candelatech.com>, linux-wireless@vger.kernel.org
Subject: [PATCH v2] ath10k: support msdu chaining.
Date: Thu, 27 Feb 2014 17:20:52 -0800 [thread overview]
Message-ID: <1393550452-1302-1-git-send-email-greearb@candelatech.com> (raw)
From: Ben Greear <greearb@candelatech.com>
Consolidate the list of msdu skbs into the msdu-head skb, delete the
rest of the skbs, pass the msdu-head skb on up the stack as normal.
Tested with high-speed TCP and UDP traffic on modified firmware that
supports raw-rx.
Signed-off-by: Ben Greear <greearb@candelatech.com>
---
v2: Add note about skb_try_coalesce, though I am not sure it will
work or not.
Only grow skb once, which should save on some memory (re)allocation
and copying when we have more than one chained skb.
drivers/net/wireless/ath/ath10k/htt_rx.c | 60 +++++++++++++++++++++++++++++---
1 file changed, 56 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c
index 9f3def7..a5070a9 100644
--- a/drivers/net/wireless/ath/ath10k/htt_rx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
@@ -401,6 +401,7 @@ static int ath10k_htt_rx_amsdu_pop(struct ath10k_htt *htt,
msdu_len = MS(__le32_to_cpu(rx_desc->msdu_start.info0),
RX_MSDU_START_INFO0_MSDU_LENGTH);
msdu_chained = rx_desc->frag_info.ring2_more_count;
+ msdu_chaining = msdu_chained;
if (msdu_len_invalid)
msdu_len = 0;
@@ -428,7 +429,6 @@ static int ath10k_htt_rx_amsdu_pop(struct ath10k_htt *htt,
msdu->next = next;
msdu = next;
- msdu_chaining = 1;
}
last_msdu = __le32_to_cpu(rx_desc->msdu_end.info0) &
@@ -1008,14 +1008,66 @@ continue_on:
continue;
}
- /* FIXME: we do not support chaining yet.
- * this needs investigation */
if (msdu_chaining) {
- ath10k_warn("htt rx msdu_chaining is true\n");
+ struct sk_buff *next = msdu_head->next;
+ struct sk_buff *to_free = next;
+ static int do_once = 1;
+ int space;
+ int total_len = 0;
+
+ /* TODO: Might could optimize this by using
+ * skb_try_coalesce or similar method to]
+ * decrease copying.
+ */
+
+ msdu_head->next = NULL;
+
+ if (unlikely(do_once)) {
+ ath10k_warn("htt rx msdu_chaining detected %d\n",
+ msdu_chaining);
+ do_once = 0;
+ }
+
+ /* Allocate total length all at once. */
+ while (next) {
+ total_len += next->len;
+ next = next->next;
+ }
+
+ space = total_len - skb_tailroom(msdu_head);
+ if ((space > 0) &&
+ (pskb_expand_head(msdu_head, 0, space, GFP_ATOMIC) < 0)) {
+ /* TODO: bump some rx-oom error stat */
+ goto outside_continue;
+ }
+
+ /* Walk list again, copying contents into
+ * msdu_head
+ */
+ next = to_free;
+ while (next) {
+ skb_copy_from_linear_data(next, skb_put(msdu_head, next->len),
+ next->len);
+ next = next->next;
+ }
+
+ /* If here, we have consolidated skb. Free the
+ * fragments and pass the main skb on up the
+ * stack.
+ */
+ ath10k_htt_rx_free_msdu_chain(to_free);
+ goto have_good_msdu;
+
+ outside_continue:
+ /* put it back together so we can free the
+ * whole list at once.
+ */
+ msdu_head->next = to_free;
ath10k_htt_rx_free_msdu_chain(msdu_head);
continue;
}
+ have_good_msdu:
info.skb = msdu_head;
info.fcs_err = ath10k_htt_rx_has_fcs_err(msdu_head);
info.mic_err = ath10k_htt_rx_has_mic_err(msdu_head);
--
1.7.11.7
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
next reply other threads:[~2014-02-28 1:21 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-28 1:20 greearb [this message]
2014-02-28 7:38 ` [PATCH v2] ath10k: support msdu chaining Kalle Valo
2014-02-28 7:51 ` Michal Kazior
2014-03-03 22:08 ` Ben Greear
2014-03-04 7:14 ` Michal Kazior
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1393550452-1302-1-git-send-email-greearb@candelatech.com \
--to=greearb@candelatech.com \
--cc=ath10k@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox