From: "Andrew C. Dingman" <andrew@dingman.org>
To: ath10k@lists.infradead.org
Subject: QCA6164 txbf failure
Date: Mon, 05 Oct 2015 10:38:49 -0400 [thread overview]
Message-ID: <1444055929.9501.14.camel@dingman.org> (raw)
It looks like the QCA6164 in my Lenovo Yoga 3 11" has problems with
txbf. I'm using Fedora with a 4.3.0-rc3 kernel from Koji. (A
development build system - it's not a released kernel)
Using firmware from https://github.com/kvalo/ath10k-firmware.git except
for the board.bin, which came https://github.com/atondwal/ath10k-firmwa
re.git. Specifically, to get the card to boot I ran "sudo cp
ath10k/QCA6164/hw2.1/board.bin
/lib/firmware/ath10k/QCA6174/hw2.1/board-pci-168c:0041:17aa:3545.bin"
from the latter git repo.
Using the unmodified 4.3 kernel above, this allowed the card to be
recognized, and even report successful authentication and association
to an access point in dmesg. However, it never completed a connection,
and scanning access points failed.
Based on the dmesg output, michalk in IRC suggested that I try applying
the patch from http://lists.infradead.org/pipermail/ath10k/2015-August/
005909.html. With that change, the device seems to work fine.
-Andrew
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
next reply other threads:[~2015-10-05 14:39 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-05 14:38 Andrew C. Dingman [this message]
2015-10-05 14:46 ` QCA6164 txbf failure Andrew C. Dingman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1444055929.9501.14.camel@dingman.org \
--to=andrew@dingman.org \
--cc=ath10k@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox