From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail2.candelatech.com ([208.74.158.173]) by bombadil.infradead.org with esmtp (Exim 4.80.1 #2 (Red Hat Linux)) id 1aRpWD-0005A5-Ba for ath10k@lists.infradead.org; Fri, 05 Feb 2016 23:10:25 +0000 From: greearb@candelatech.com Subject: [PATCH] ath10k: Document alloc_frag_desc_for_data_pkt config option. Date: Fri, 5 Feb 2016 15:10:02 -0800 Message-Id: <1454713802-21244-1-git-send-email-greearb@candelatech.com> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "ath10k" Errors-To: ath10k-bounces+kvalo=adurom.com@lists.infradead.org To: ath10k@lists.infradead.org Cc: Ben Greear From: Ben Greear This will help anyone trying to use the ack-rssi reporting feature with the host-specified TX-rate option in 10.4 firmware. Signed-off-by: Ben Greear --- drivers/net/wireless/ath/ath10k/wmi.h | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h index e27a3ba..9f7cfc1 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.h +++ b/drivers/net/wireless/ath/ath10k/wmi.h @@ -2678,9 +2678,14 @@ struct wmi_resource_config_10_4 { */ __le32 iphdr_pad_config; - /* qwrap configuration + /* qwrap configuration (bits 15-0) * 1 - This is qwrap configuration * 0 - This is not qwrap + * + * Bits 31-16 is alloc_frag_desc_for_data_pkt (1 enables, 0 disables) + * In order to get ack-RSSI reporting and to specify the tx-rate for + * individual frames, this option must be enabled. This uses an extra + * 4 bytes per tx-msdu descriptor, so don't enable it unless you need it. */ __le32 qwrap_config; } __packed; -- 2.4.3 _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k