From: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>
To: linux-wireless@vger.kernel.org
Cc: mohammed@codeaurora.org, johannes@sipsolutions.net,
kvalo@codeaurora.org, ath10k@lists.infradead.org,
Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>
Subject: [PATCH v3] cfg80211/nl80211: Add support for NL80211_STA_INFO_RX_DURATION
Date: Wed, 9 Mar 2016 18:45:56 +0530 [thread overview]
Message-ID: <1457529357-19077-1-git-send-email-mohammed@qca.qualcomm.com> (raw)
From: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>
Add support for new netlink attribute 'NL80211_STA_INFO_RX_DURATION'
This flag will be set when drivers can fill rx_duration (aggregate
PPDU duration(usecs) for all the frames from a peer) via
'drv_sta_statistics' callback
Also make sta_info flags 'filled' as 64 bit to accommodate for new
per station stats. Extend 'PUT_SINFO' for supporting rx_duration
field and any new per sta information in future
Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>
---
include/net/cfg80211.h | 4 +++-
include/uapi/linux/nl80211.h | 3 +++
net/wireless/nl80211.c | 3 ++-
3 files changed, 8 insertions(+), 2 deletions(-)
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 9bcaaf7..a9552f6 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -1060,11 +1060,12 @@ struct cfg80211_tid_stats {
* @rx_beacon: number of beacons received from this peer
* @rx_beacon_signal_avg: signal strength average (in dBm) for beacons received
* from this peer
+ * @rx_duration: aggregate PPDU duration(usecs) for all the frames from a peer
* @pertid: per-TID statistics, see &struct cfg80211_tid_stats, using the last
* (IEEE80211_NUM_TIDS) index for MSDUs not encapsulated in QoS-MPDUs.
*/
struct station_info {
- u32 filled;
+ u64 filled;
u32 connected_time;
u32 inactive_time;
u64 rx_bytes;
@@ -1103,6 +1104,7 @@ struct station_info {
u32 expected_throughput;
u64 rx_beacon;
+ u64 rx_duration;
u8 rx_beacon_signal_avg;
struct cfg80211_tid_stats pertid[IEEE80211_NUM_TIDS + 1];
};
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index 5b7b5eb..361b2cd 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -2464,6 +2464,8 @@ enum nl80211_sta_bss_param {
* TID+1 and the special TID 16 (i.e. value 17) is used for non-QoS frames;
* each one of those is again nested with &enum nl80211_tid_stats
* attributes carrying the actual values.
+ * @NL80211_STA_INFO_RX_DURATION: aggregate PPDU duration(usecs) for all the
+ * frames from a peer
* @__NL80211_STA_INFO_AFTER_LAST: internal
* @NL80211_STA_INFO_MAX: highest possible station info attribute
*/
@@ -2500,6 +2502,7 @@ enum nl80211_sta_info {
NL80211_STA_INFO_BEACON_RX,
NL80211_STA_INFO_BEACON_SIGNAL_AVG,
NL80211_STA_INFO_TID_STATS,
+ NL80211_STA_INFO_RX_DURATION,
/* keep last */
__NL80211_STA_INFO_AFTER_LAST,
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index d4786f2..a81c016 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -3719,7 +3719,7 @@ static int nl80211_send_station(struct sk_buff *msg, u32 cmd, u32 portid,
goto nla_put_failure;
#define PUT_SINFO(attr, memb, type) do { \
- if (sinfo->filled & BIT(NL80211_STA_INFO_ ## attr) && \
+ if (sinfo->filled & (1ULL << NL80211_STA_INFO_ ## attr) && \
nla_put_ ## type(msg, NL80211_STA_INFO_ ## attr, \
sinfo->memb)) \
goto nla_put_failure; \
@@ -3745,6 +3745,7 @@ static int nl80211_send_station(struct sk_buff *msg, u32 cmd, u32 portid,
PUT_SINFO(LLID, llid, u16);
PUT_SINFO(PLID, plid, u16);
PUT_SINFO(PLINK_STATE, plink_state, u8);
+ PUT_SINFO(RX_DURATION, rx_duration, u64);
switch (rdev->wiphy.signal_type) {
case CFG80211_SIGNAL_TYPE_MBM:
--
1.7.9.5
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
next reply other threads:[~2016-03-09 13:16 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-09 13:15 Mohammed Shafi Shajakhan [this message]
2016-03-09 13:15 ` [PATCH v3] iw: Add support for NL80211_STA_INFO_RX_DURATION netlink attribute Mohammed Shafi Shajakhan
2016-04-05 10:04 ` [PATCH v3] cfg80211/nl80211: Add support for NL80211_STA_INFO_RX_DURATION Johannes Berg
2016-04-05 12:38 ` Mohammed Shafi Shajakhan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1457529357-19077-1-git-send-email-mohammed@qca.qualcomm.com \
--to=mohammed@qti.qualcomm.com \
--cc=ath10k@lists.infradead.org \
--cc=johannes@sipsolutions.net \
--cc=kvalo@codeaurora.org \
--cc=linux-wireless@vger.kernel.org \
--cc=mohammed@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox