From: "KC" <kc@mail2000.com.tw>
To: ath10k <ath10k@lists.infradead.org>
Cc: KC Chen <KC1120@gmail.com>
Subject: ath10k driver firmware crash when bring up qca 9984 wireless car d
Date: Thu, 26 Apr 2018 16:46:38 +0800 (CST) [thread overview]
Message-ID: <1524732398.3848.kc@mail2000.com.tw> (raw)
[-- Attachment #1: Type: text/plain, Size: 488 bytes --]
Hi
I'm porting ath10k drivers for Linux 4.2.8.
Try to bring up QCA9984 wireless PCI-e card.
I have problem with running ath10k driver, firmware load then the kernel message will show the firmware crashed during boot.
The attachment is the error log.
I also tried firmware ver 10.4-3.2, 10.4-3.3 and 10.4-3.5.3 without success: same symptoms an same faults.
I can provide more information (logs) to help to figure out: where the problem is?
Thanks,
KC
[-- Attachment #2: ath10k_qca9984_firmware_crashed_.log --]
[-- Type: text/plain, Size: 8250 bytes --]
[ 5813.580836] Loading modules backported from Linux version v4.13.12-0-g0da7475
[ 5813.587986] Backport generated by backports.git v4.14-rc2-1-24-gc6db471
[ 5813.609284] ath10k_pci 0000:0a:00.0: irq 153 for MSI
[ 5813.614295] ath10k_pci 0000:0a:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 5813.664312] ath10k_pci 0000:0b:00.0: irq 154 for MSI
[ 5813.669309] ath10k_pci 0000:0b:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 5813.717310] ath10k_pci 0000:0a:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe
[ 5813.727246] ath10k_pci 0000:0a:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 1 testmode 0
[ 5813.735704] ath10k_pci 0000:0a:00.0: firmware ver 10.4-3.2-00072 api 5 features no-p2p,mfp,peer-flow-ctrl crc32 61dee96a
[ 5813.771996] ath10k_pci 0000:0b:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe
[ 5813.781969] ath10k_pci 0000:0b:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 1 testmode 0
[ 5813.790469] ath10k_pci 0000:0b:00.0: firmware ver 10.4-3.2-00072 api 5 features no-p2p,mfp,peer-flow-ctrl crc32 61dee96a
[ 5815.168034] ath10k_pci 0000:0a:00.0: board_file api 2 bmi_id 0:1 crc32 751efba1
[ 5815.223442] ath10k_pci 0000:0b:00.0: board_file api 2 bmi_id 0:2 crc32 751efba1
[ 5817.842722] ath10k_pci 0000:0a:00.0: firmware crashed! (uuid 7ade5233-a63c-49b0-bef2-a9365e0843b4)
[ 5817.851732] ath10k_pci 0000:0a:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe
[ 5817.861719] ath10k_pci 0000:0a:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 1 testmode 0
[ 5817.870168] ath10k_pci 0000:0a:00.0: firmware ver 10.4-3.2-00072 api 5 features no-p2p,mfp,peer-flow-ctrl crc32 61dee96a
[ 5817.881099] ath10k_pci 0000:0a:00.0: board_file api 2 bmi_id 0:1 crc32 751efba1
[ 5817.888418] ath10k_pci 0000:0a:00.0: htt-ver 0.0 wmi-op 6 htt-op 4 cal otp max-sta 32 raw 0 hwcrypto 1
[ 5817.899745] ath10k_pci 0000:0a:00.0: firmware register dump:
[ 5817.905411] ath10k_pci 0000:0a:00.0: [00]: 0x01000000 0x00000000 0x009CF084 0x00000000
[ 5817.913333] ath10k_pci 0000:0a:00.0: [04]: 0x009CF084 0x00060330 0x0000000E 0x00000000
[ 5817.921256] ath10k_pci 0000:0a:00.0: [08]: 0x00000004 0x00414B50 0x00405524 0x00975A00
[ 5817.929180] ath10k_pci 0000:0a:00.0: [12]: 0x00000000 0xFFFFFFFF 0x00973D28 0x00973D33
[ 5817.937105] ath10k_pci 0000:0a:00.0: [16]: 0x800D8B69 0x004069AC 0x00000004 0x00414B50
[ 5817.945032] ath10k_pci 0000:0a:00.0: [20]: 0x00401F00 0x00401F04 0x00000004 0x00000000
[ 5817.952957] ath10k_pci 0000:0a:00.0: [24]: 0x800C383A 0x004069DC 0x004149E0 0x00400000
[ 5817.960878] ath10k_pci 0000:0a:00.0: [28]: 0x00000000 0x00000000 0x004149E0 0x00400000
[ 5817.968802] ath10k_pci 0000:0a:00.0: [32]: 0x00405524 0x00975A00 0x00000000 0x00000000
[ 5817.976725] ath10k_pci 0000:0a:00.0: [36]: 0x809800A3 0x00406A0C 0x004149F0 0x009C3F98
[ 5817.984648] ath10k_pci 0000:0a:00.0: [40]: 0x00000000 0x00000000 0x0047EB48 0x00000004
[ 5817.992571] ath10k_pci 0000:0a:00.0: [44]: 0x00020EB2 0x00404C20 0x00000006 0x00000047
[ 5818.000497] ath10k_pci 0000:0a:00.0: [48]: 0x8098003A 0x00406A5C 0x00400000 0x00400600
[ 5818.008422] ath10k_pci 0000:0a:00.0: [52]: 0x80961A63 0x00406A4C 0x00400000 0x00000000
[ 5818.016348] ath10k_pci 0000:0a:00.0: [56]: 0x00406400 0x00000000 0x00402324 0x00000001
[ 5818.024274] ath10k_pci 0000:0a:00.0: Copy Engine register dump:
[ 5818.030210] ath10k_pci 0000:0a:00.0: [00]: 0x0004a000 7 7 8 7
[ 5818.036663] ath10k_pci 0000:0a:00.0: [01]: 0x0004a400 6 6 5 6
[ 5818.043119] ath10k_pci 0000:0a:00.0: [02]: 0x0004a800 0 0 127 0
[ 5818.049573] ath10k_pci 0000:0a:00.0: [03]: 0x0004ac00 0 0 0 0
[ 5818.056028] ath10k_pci 0000:0a:00.0: [04]: 0x0004b000 0 0 0 0
[ 5818.062482] ath10k_pci 0000:0a:00.0: [05]: 0x0004b400 0 0 0 0
[ 5818.068933] ath10k_pci 0000:0a:00.0: [06]: 0x0004b800 0 0 0 0
[ 5818.075386] ath10k_pci 0000:0a:00.0: [07]: 0x0004bc00 1 1 1 1
[ 5818.081838] ath10k_pci 0000:0a:00.0: [08]: 0x0004c000 0 0 127 0
[ 5818.088294] ath10k_pci 0000:0a:00.0: [09]: 0x0004c400 1 1 1 1
[ 5818.094746] ath10k_pci 0000:0a:00.0: [10]: 0x0004c800 0 0 0 0
[ 5818.101202] ath10k_pci 0000:0a:00.0: [11]: 0x0004cc00 0 0 0 0
[ 5818.107683] ath10k_pci 0000:0b:00.0: firmware crashed! (uuid ad40fac3-8bc4-4b21-9b68-5a71c29251a7)
[ 5818.116652] ath10k_pci 0000:0b:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe
[ 5818.126573] ath10k_pci 0000:0b:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 1 testmode 0
[ 5818.135022] ath10k_pci 0000:0b:00.0: firmware ver 10.4-3.2-00072 api 5 features no-p2p,mfp,peer-flow-ctrl crc32 61dee96a
[ 5818.145959] ath10k_pci 0000:0b:00.0: board_file api 2 bmi_id 0:2 crc32 751efba1
[ 5818.153281] ath10k_pci 0000:0b:00.0: htt-ver 0.0 wmi-op 6 htt-op 4 cal otp max-sta 32 raw 0 hwcrypto 1
[ 5818.164611] ath10k_pci 0000:0b:00.0: firmware register dump:
[ 5818.170279] ath10k_pci 0000:0b:00.0: [00]: 0x01000000 0x00000000 0x009CF084 0x00000000
[ 5818.178205] ath10k_pci 0000:0b:00.0: [04]: 0x009CF084 0x00060330 0x0000000E 0x00000000
[ 5818.186129] ath10k_pci 0000:0b:00.0: [08]: 0x00000004 0x00414B50 0x00405524 0x00975A00
[ 5818.194056] ath10k_pci 0000:0b:00.0: [12]: 0x00000000 0xFFFFFFFF 0x00973D28 0x00973D33
[ 5818.201983] ath10k_pci 0000:0b:00.0: [16]: 0x800D8B69 0x004069AC 0x00000004 0x00414B50
[ 5818.209907] ath10k_pci 0000:0b:00.0: [20]: 0x00401F00 0x00401F04 0x00000004 0x00000000
[ 5818.217830] ath10k_pci 0000:0b:00.0: [24]: 0x800C383A 0x004069DC 0x004149E0 0x00400000
[ 5818.225758] ath10k_pci 0000:0b:00.0: [28]: 0x00000000 0x00000000 0x004149E0 0x00400000
[ 5818.233684] ath10k_pci 0000:0b:00.0: [32]: 0x00405524 0x00975A00 0x00000000 0x00000000
[ 5818.241609] ath10k_pci 0000:0b:00.0: [36]: 0x809800A3 0x00406A0C 0x004149F0 0x009C3F98
[ 5818.249536] ath10k_pci 0000:0b:00.0: [40]: 0x00000000 0x00000000 0x0047EB48 0x00000004
[ 5818.257461] ath10k_pci 0000:0b:00.0: [44]: 0x00020ECA 0x00404C20 0x00000006 0x00000047
[ 5818.265387] ath10k_pci 0000:0b:00.0: [48]: 0x8098003A 0x00406A5C 0x00400000 0x00400600
[ 5818.273313] ath10k_pci 0000:0b:00.0: [52]: 0x80961A63 0x00406A4C 0x00400000 0x00000000
[ 5818.281241] ath10k_pci 0000:0b:00.0: [56]: 0x00406400 0x00000000 0x00402324 0x00000001
[ 5818.289167] ath10k_pci 0000:0b:00.0: Copy Engine register dump:
[ 5818.295102] ath10k_pci 0000:0b:00.0: [00]: 0x0004a000 7 7 8 7
[ 5818.301558] ath10k_pci 0000:0b:00.0: [01]: 0x0004a400 6 6 5 6
[ 5818.308011] ath10k_pci 0000:0b:00.0: [02]: 0x0004a800 0 0 127 0
[ 5818.314467] ath10k_pci 0000:0b:00.0: [03]: 0x0004ac00 0 0 0 0
[ 5818.320923] ath10k_pci 0000:0b:00.0: [04]: 0x0004b000 0 0 0 0
[ 5818.327381] ath10k_pci 0000:0b:00.0: [05]: 0x0004b400 0 0 0 0
[ 5818.333837] ath10k_pci 0000:0b:00.0: [06]: 0x0004b800 0 0 0 0
[ 5818.340294] ath10k_pci 0000:0b:00.0: [07]: 0x0004bc00 1 1 1 1
[ 5818.346750] ath10k_pci 0000:0b:00.0: [08]: 0x0004c000 0 0 127 0
[ 5818.353202] ath10k_pci 0000:0b:00.0: [09]: 0x0004c400 1 1 1 1
[ 5818.359661] ath10k_pci 0000:0b:00.0: [10]: 0x0004c800 0 0 0 0
[ 5818.366118] ath10k_pci 0000:0b:00.0: [11]: 0x0004cc00 0 0 0 0
[ 5818.797569] ath10k_pci 0000:0a:00.0: failed to receive control response completion, polling..
[ 5818.853576] ath10k_pci 0000:0b:00.0: failed to receive control response completion, polling..
[ 5819.805396] ath10k_pci 0000:0a:00.0: ctl_resp never came in (-110)
[ 5819.811590] ath10k_pci 0000:0a:00.0: failed to connect to HTC: -110
[ 5819.860779] ath10k_pci 0000:0a:00.0: could not init core (-110)
[ 5819.861336] ath10k_pci 0000:0b:00.0: ctl_resp never came in (-110)
[ 5819.861337] ath10k_pci 0000:0b:00.0: failed to connect to HTC: -110
[ 5819.879179] ath10k_pci 0000:0a:00.0: could not probe fw (-110)
[ 5819.892527] ath10k_pci 0000:0a:00.0: cannot restart a device that hasn't been started
[ 5819.904124] ath10k_pci 0000:0b:00.0: could not init core (-110)
[ 5819.910079] ath10k_pci 0000:0b:00.0: could not probe fw (-110)
[ 5819.920524] ath10k_pci 0000:0b:00.0: cannot restart a device that hasn't been started
[-- Attachment #3: Type: text/plain, Size: 146 bytes --]
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
next reply other threads:[~2018-04-26 8:57 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-04-26 8:46 KC [this message]
2018-04-26 15:03 ` ath10k driver firmware crash when bring up qca 9984 wireless car d Ben Greear
2018-04-27 6:12 ` KC
2018-04-27 17:20 ` Ben Greear
2018-04-30 2:57 ` ath10k driver firmware crash when bring up qca 9984 wireless card KC
2018-04-30 16:00 ` Ben Greear
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1524732398.3848.kc@mail2000.com.tw \
--to=kc@mail2000.com.tw \
--cc=KC1120@gmail.com \
--cc=ath10k@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox