From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from smtp.codeaurora.org ([198.145.29.96]) by bombadil.infradead.org with esmtps (Exim 4.90_1 #2 (Red Hat Linux)) id 1g9SAs-000836-8e for ath10k@lists.infradead.org; Mon, 08 Oct 2018 09:50:19 +0000 From: Carl Huang Subject: [PATCH] ath10k: allocate small size dma memory in ath10k_pci_diag_write_mem Date: Mon, 8 Oct 2018 17:49:42 +0800 Message-Id: <1538992182-3717-1-git-send-email-cjhuang@codeaurora.org> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "ath10k" Errors-To: ath10k-bounces+kvalo=adurom.com@lists.infradead.org To: ath10k@lists.infradead.org Cc: linux-wireless@vger.kernel.org ath10k_pci_diag_write_mem may allocate big size of the dma memory based on the parameter nbytes. Take firmware diag download as example, the biggest size is about 500K. In some systems, the allocation is likely to fail because it can't acquire such a large contiguous dma memory. The fix is to allocate a small size dma memory. In the loop, driver copies the data to the allocated dma memory and writes to the destination until all the data is written. Tested with QCA6174 PCI with firmware-6.bin_WLAN.RM.4.4.1-00119-QCARMSWP-1, this also affects QCA9377 PCI. Signed-off-by: Carl Huang --- drivers/net/wireless/ath/ath10k/pci.c | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-) diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c index 873dbb6..1872671 100644 --- a/drivers/net/wireless/ath/ath10k/pci.c +++ b/drivers/net/wireless/ath/ath10k/pci.c @@ -1071,7 +1071,7 @@ int ath10k_pci_diag_write_mem(struct ath10k *ar, u32 address, struct ath10k_ce *ce = ath10k_ce_priv(ar); int ret = 0; u32 *buf; - unsigned int completed_nbytes, orig_nbytes, remaining_bytes; + unsigned int completed_nbytes, alloc_nbytes, remaining_bytes; struct ath10k_ce_pipe *ce_diag; void *data_buf = NULL; u32 ce_data; /* Host buffer address in CE space */ @@ -1088,9 +1088,10 @@ int ath10k_pci_diag_write_mem(struct ath10k *ar, u32 address, * 1) 4-byte alignment * 2) Buffer in DMA-able space */ - orig_nbytes = nbytes; + alloc_nbytes = min_t(unsigned int, nbytes, DIAG_TRANSFER_LIMIT); + data_buf = (unsigned char *)dma_alloc_coherent(ar->dev, - orig_nbytes, + alloc_nbytes, &ce_data_base, GFP_ATOMIC); if (!data_buf) { @@ -1098,9 +1099,6 @@ int ath10k_pci_diag_write_mem(struct ath10k *ar, u32 address, goto done; } - /* Copy caller's data to allocated DMA buf */ - memcpy(data_buf, data, orig_nbytes); - /* * The address supplied by the caller is in the * Target CPU virtual address space. @@ -1113,12 +1111,15 @@ int ath10k_pci_diag_write_mem(struct ath10k *ar, u32 address, */ address = ath10k_pci_targ_cpu_to_ce_addr(ar, address); - remaining_bytes = orig_nbytes; + remaining_bytes = nbytes; ce_data = ce_data_base; while (remaining_bytes) { /* FIXME: check cast */ nbytes = min_t(int, remaining_bytes, DIAG_TRANSFER_LIMIT); + /* Copy caller's data to allocated DMA buf */ + memcpy(data_buf, data, nbytes); + /* Set up to receive directly into Target(!) address */ ret = ce_diag->ops->ce_rx_post_buf(ce_diag, &address, address); if (ret != 0) @@ -1171,12 +1172,12 @@ int ath10k_pci_diag_write_mem(struct ath10k *ar, u32 address, remaining_bytes -= nbytes; address += nbytes; - ce_data += nbytes; + data += nbytes; } done: if (data_buf) { - dma_free_coherent(ar->dev, orig_nbytes, data_buf, + dma_free_coherent(ar->dev, alloc_nbytes, data_buf, ce_data_base); } -- 2.7.4 _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k